Guitar tuning eb. Low tuning guitar. Down a whole tone: D-G-C-f-a-d

The guitar is one of the most famous and at the same time unpredictable instruments that can touch the most sensual strings of the soul. But the guitar itself also has them.

Few people pay attention to the name of the strings on a guitar, considering it completely unnecessary. But often the performance of any composition depends on the setting. Any dissonance causes associative rejection of the composition as a whole. But this material will focus on tuning the instrument and its use for beginning musicians.

Guitar string name: classic version

In general, it is considered a classic. However, one can recall quite a lot of examples of great composers who preferred seven strings to six (at least Vysotsky).

However, according to music theory and solfeggio, the names of the strings do not differ at all. Based on the rules established general theory music, the notes by which any instrument is built have their own names and abbreviations in the form of Latin symbols and language interpretations. In our case it is:

  • C - to.
  • D - re.
  • E - mi.
  • F - fa.
  • G - salt.
  • A - la.
  • H - B (B - B-flat is indicated separately).

(sharps, flats, bekars or their double versions) are applied accordingly. But there are only 6 strings.

The string on the guitar at the top of the neck has the same sound as the first string at the bottom three octaves apart. Therefore, both the first and sixth are, as it were, dominant, but only in relation to a 6-string instrument (the main tuning is in E minor).

Mi-si-sol-re-la-mi: is the sequence in tuning correct?

Quite often, many beginning guitarists who are trying to understand the basics of the technique are immediately faced with the problem of tuning, not knowing which string corresponds to which symbol in the designation or sound.

If you go through the search, sequentially from the sixth string to the first, it will look like “e-la-re-sol-si-mi”. And the above sequence is reverse.

Such a sequence is not suitable for a flat sequence, since it should look like “si-mi-la-re-sol-do-fa”. However, we digress from the topic.

Fundamental tone and tuning

The name of the strings, as is already clear, is standard for any instrument. As for the (6-string) this is done quite simply.

There are several ways in which a beginning musician can use the unison of an open string lower on the neck with one that is clamped at the fifth fret above. All strings, except the third, are built according to this rule. You can use the harmonic effect on different frets (the strings vibrate among themselves) or turn on a distortion effect, which will add drive and increase vibration. That is, the strings will have to be retuned until the sound matches completely. Professional electric guitars have a special micro-tuning device on the soundboard for this purpose).

Basic chords for beginners

Many beginning guitarists tend to associate the note “A” with the chord, which is the second simplest chord in guitar technique.

It consists of only three fingers: two on the second fret (fourth and third string) and one on the second string on the first fret. The note "A" in in this case acts as a tonic.

But the simplest chord is still the E minor chord. There are only two strings - the fifth and fourth on the second fret. A major chord played from “E” involves holding the third string on the second fret, and a major chord with the tonic “A” is even simpler - three fingers on the second fret (second, third and fourth string).

Barre technique

Although the name of the strings on a guitar no longer causes misunderstanding, it is especially worth noting a technique called barre (clamping index finger all right).

Any standard chord can be built using this technique. In fact, the same simple applications indicated above can be applied to this case, but only the nut near the tuning mechanism on the headstock acts as a barre.

Varieties of playing techniques

The name of the strings on a guitar is often emphasized with certain symbols, although it is not directly advertised. For example, in the standard version the third, fifth, seventh and twelfth frets are designated (sometimes the ninth). For many famous guitarists you can find all sorts of signs, including skulls or something else. These guitars are made to order.

And playing any instrument is quite difficult, be it fingerpicking, strumming, tapping, sliding, etc. With the advent of “gadgets,” technology has reached new level. That alone is worth it... And modern guitarists generally demonstrate such miracles of technology that it simply boggles the mind.

The same Steve Vai, Marty Friedmann or Kirk Hammett are the only ones of our time. And by the way, even though they know classical school, do not always use it in their improvisations. For example, Friedman tends to play in fifths, or nine notes per pass. And everyone's technique is different. But if you set a goal, nothing is impossible. Maybe the modern reader will become a great guitarist in the future, who knows?

Many guitarists wonder which strings are best suited to their tuning. When choosing, it is worth remembering that preferences for tension and string diameter are a very individual thing. It is for this reason that you should not take information from of this material as an absolute truth: we will present the most generalized and averaged data, according to which you can choose the optimal thickness of the set to suit your preferences.

For ease of reading the article, we will use whole string thickness designations (for example, 9-42 instead of 0.009-0.042).

Factors influencing the choice of string thickness

  • Guitar scale: the longer it is, the tighter the strings will be, all other things being equal. In the table below we will be using the standard 25.5" scale. If you have a guitar with a smaller scale, then you will need to make a slight adjustment and go with a thicker set.
  • String tension: The higher their tension, the thicker the strings - accordingly, they have a more powerful and voluminous sound. However, on the other hand, thicker strings have a smaller vibration amplitude, which is why their sound is not as rich in overtones, it is duller and flatter - this is especially audible on thin strings without winding.
  • Third string: in most sets this is not wound (plain). In sets with a first string thickness of 12 or more, the third string is usually wrapped. In this case, it is worth considering that the braid increases the tension - you will have to forget about bending by one and a half to two tones, although, on the other hand, in lower tunings the third string of the wound sounds much fuller and richer.
  • Today you can buy guitar strings in balanced sets (8-38, 9-42, 10-46, 11-50, 12-54, 13-56, etc.) and unbalanced(9-46, 10-52, 11-52, 12-56/60, etc.)

The former are usually used for standard tuning or a tuning lowered across all strings by an equal number of semitones. The second type is ideal for lovers of drop tunings (the 6th string is lowered by whole tone), as well as for those who use hybrid and open settings guitars.

  • The thickest sets of strings (12-60, 13-72, etc.) are best suited for long-scale guitars - baritones. They have a scale length of 26 inches or more, and are used in very low tunings (for example, Standard A and lower).

In principle, such kits can also be used for instruments with a standard scale for deeply lowered tuning, but before purchasing you should consider a couple of nuances:

  • You may simply not have enough scale adjustment options at the bridge, since lower tuning requires retuning. In this case, either replacing the bridge or switching to a thinner set will help.
  • If you use a thicker set, you will either bore out the string grooves on the nut or simply won't be able to fit the strings into them. When switching back to thinner strings, they will hang around in the counterbore grooves, making it difficult to fine-tune the guitar.

In addition, thick strings may not fit into the peg - it will also have to be bored.

Which strings are suitable for a particular tuning?

Guitar tuning

Matching String Sets

Standard E

8-38 is a specific set that is more suitable for experienced musicians. The very small diameter allows you to make microbends simply by pressing the strings harder against the frets (this is especially effective when using a scalloped neck). From famous musicians Yngwie Malmsteen is a fan of this set

9-42 - suitable for a beginning musician, installed on all production Fender guitars

10-46 is perhaps the most popular caliber for standard tuning: the perfect balance between comfort and tone.

9.5-44 - a compromise set for lovers of dynamic sound and frequent bends

11-50 - a favorite set of musicians performing blues and light rock: allows you to swing the guitar wood to full power

12-54 - suitable, for example, for guitars with voids inside the soundboard when playing jazz and blues. High tension

9-46 - similar to the classic 9-42 set for drop tuning

10-52 - analogue of the 10-46 set for drop tuning

10-50 is not a very popular set, which, according to many musicians, is more balanced for drops and more pleasant to play than 10-52

10-60 - an unbalanced kit for those who play heavy music, this kit is used by Zakk Wylde

11-54 - bright and powerful sound when playing harmonic parts on low strings

11-56 - the most spacious and deep sound, suitable for musicians with strong fingers

Standard D

10-46 - light bends, tension below average. For singing lead parts

11-50 - perfectly balanced tension

12-54 - above average tension: every bluesman's dream

13-56 - strong tension, deep and powerful tone

10-60 is a good choice for this tuning: 1-3 strings stretch well, low strings sound monolithic and deep

11-52 - minimum thickness for this tuning, tension below average

11-54 - classic set for drop C

11-56 - enhanced sound of low strings, the difference is not always noticeable

12-54 - thicker high strings, more suitable for playing harmonic parts

12-60 - strong tension, good choice for heavy music with minimum quantity lead party

Standard A

14-68 - medium tension, excellent balance

Helpful tip: If you want to tune your guitar to B Standard or lower, consider buying a baritone or 7-string guitar - you need to understand that not all types of 6-string electric guitars are designed for experimenting with strong detuning.

Let us repeat that these recommendations are conditional and partly subjective. Suffice it to remember the great SRV, which used the 13-56 kit for the Standard Eb build: therefore, the most important thing is your feelings. Try several different sets, experiment - and you will certainly find the optimal set for your music!

Based on materials from an article by Egor Kalgannikov, 12.2013.

In the previous article, the issue of lowered order guitars. In this article I would like to discuss it in more detail.
Let me remind you that the standard tuning of a six-string electric guitar is: E[E]-A[A]-De[D]-G[G]-B[H]-E[E], starting from the sixth string. Let's consider the prerequisites for switching to a different guitar tuning. Low pitch used in extreme music to create a denser, heavier and more powerful sound. You can also give an example of when musicians playing in rock bands decide to use a lower tuning to make it easier for the vocalist to sing. That is, they adapt to a certain person and a certain style of music. By the way, you can also raise the tuning of the guitar, adapting to the singer’s vocal abilities. Also, the use of a low guitar tuning is due to a different chord fingering. That is, the tuning of the guitar is selected for the convenience of playing chords.

When using a lower tuning electric guitar, the string tension will naturally decrease and thin strings may simply hang. Therefore, you need to select thicker sets of strings.
I can say that there are quite a lot of options for tuning a guitar. We'll look at a few common ones. Using their examples, you can choose the optimal system for yourself or come up with your own.

  1. Lower by half a tone. In this case, the system becomes as follows: Re#-Sol#-Do#-Fa#-Aa#-Re#.
  2. Decrease one tone. Guitar tuning: D[D]-G[G]-Do[C]-F[F]-A[A]-D[D].
  3. A formation called "Drop D". In this case, only the sixth string is lowered by tone: Re[D]-A[A]-Re[D]-Sol[G]-Bi[H]-Mi[E]. In this case, there is a fifth between the sixth and fifth strings and you can play various riffs by pressing these two strings with one finger.
  4. Guitar tuning: Drop D

  5. Build called "Drop C". The sixth string is lowered by two tones. The remaining strings are one tone. Then the guitar tuning looks like this: Do[C]-G[G]-Do[C]-Fa[F]-A[A]-D[D]. The tuning is lower than described above, but similarly you can play chords on two low strings with one finger.
  6. Guitar Tuning: Drop C

  7. And in conclusion, let's look at one more system. I remember him from the song Kashmir by Led Zeppelin. It looks like this: Re[D]-A[A]-Re[D]-Sol[G]-A[A]-Re[D].
  8. Led Zeppelin

Beginning guitarists often wonder: what tuning does this or that favorite rock band play in? How to tune a guitar so that you can comfortably play known and favorite songs? In this article I will briefly give examples guitar tunings in rock music and their representatives (musicians, groups).

I will immediately give a list of the notations used:

  • C - note C
  • D - note D
  • E - note E
  • F - note Fa
  • G - note Sol
  • A - note A
  • B (or H) - note B
  • # - sharp - raising a note by a semitone. Half a tone on a guitar - one fret.
  • b - flat - lowering the note by a semitone.
  • Notes in tablatures are arranged in order from the 1st (thin) string to the 6th (thick) string. For example, E B G D A E.

1. Standard, E (standard, Spanish or classical tuning).

The simplest and most famous guitar tuning. Tablature of the system: E B G D A E - Mi Si Sol Re La Mi. This system is used mainly by rock music luminaries, old-school musicians and adherents of light genres.

Bands and musicians who play standard system:

  • AC/DC
  • Led Zeppelin
  • Metallica
  • Gun's & Roses
  • Nightwish
  • Deep Purple
  • Nirvana (semitone lower)
  • Blink 182
  • Sum 41
  • Joe Satriani
  • Carlos Santana
  • Aria, Kipelov (half a tone lower)
  • Nickelback
  • Placebo
  • Rage Against The Machine
  • Queen
  • Red Hot Chili Peppers
  • Rise Against
  • Scorpions
  • Steve Vai
  • Chuck Berry
  • Bon Jovi
  • 30 Seconds To Mars

2. Drop D (lowered D)

This tuning differs from the standard one in that the 6th string on the guitar is lowered one tone. In consonance with the 4th and 5th strings it gives an octave. Tablature: E B G D A D. Like any lowered tuning, it is convenient in that you can play “zeros” (so-called open strings) and previously familiar chords can be pressed with just one finger, plus two more low chords are added that are not available when playing standard system.

Bands that play Drop tuning D:

  • Asking Alexandria
  • Avenged Sevenfold
  • Evanescence
  • Linkin Park (later albums)
  • Papa Roach
  • Rage Against The Machine
  • three days Grace
  • Thousand Foot Krutch
  • Queens of the Stone Age
  • Deftones
  • fall out Boy
  • Shinedown
  • Amatory

3. Drop C# (lowered C sharp)

This is a tuning in which all the strings are lowered by another semitone, unlike the D tuning. Tablature: D# A# F# C# G# C#.

Bands that play in the Drop C# tuning:

  • Linkin Park
  • Attack! Attack!
  • Breaking Benjamin
  • Papa Roach (some songs from recent years)
  • Limp Bizkit
  • H-Blockx
  • Staind
  • Deftones

4. Drop C (lowered C)

This lowered tuning is quite common in alternative and metalcore music. Tablature: D A F C G C.

Bands that play in the Drop C tuning:

  • Bullet For My Valentine
  • As I Lay Dying
  • Atreyu
  • Periphery
  • three days Grace
  • System of a Down
  • Godsmack
  • Nine Lashes
  • Breaking Benjamin
  • 12 Stones
  • Disturbed
  • Lumen
  • Nickelback
  • Skillet
  • Rammstein
  • Evans Blue
  • August Burns Red

5. Drop B (lowered C)

The low B tuning is an alternative to the standard seven-string guitar tuning. It allows you to tune a six-string guitar as low as a seven-string guitar, plus it allows you to play chords more comfortably. Tablature: C# G# E B F# B. Seven-string guitar tablature: E B G D A E B.

Bands that play in the Drop B tuning:

  • Parkway Drive
  • Slipknot
  • Thousand Foot Krutch
  • Bleeding Through
  • Linkin Park
  • Amatory
  • Limp Bizkit
  • Skillet
  • Veil of Maya
  • Stigmata

6. Drop A# (lowered A sharp)

This tuning is also an alternative to the seven-string guitar, lowered a half step. Tablature: C G D# A# F A#. Seven-string guitar tablature: D# A# F# C# G# D# A#.

Bands that play in the Drop A# tuning:

  • Bring Me The Horizon
  • Parkway Drive
  • Breaking Benjamin
  • Obey The Brave
  • The Ghost Inside
  • Korn (7-strings)

7. Drop A (lowered A)

Extremely low build. Tablature: B F# D A E A. Seven-string guitar tablature: D A F C G D A.

Bands that play in Drop A tuning:

  • My Autumn
  • Betraying The Martyrs
  • Emmure
  • Born Of Osiris
  • Within The Ruins

This is not a complete list of all guitar tunings. In addition to standard and lowered schemes, others are used: for example, when not only the 6th string is lowered, but also the 1st string. This technique is used in blues; it allows you to produce beautiful sounds by playing a slide on the first three strings. Also, in addition to seven-string guitars and baritones (guitars with an increased scale), there are now eight-string and even nine-string electric guitars. Accordingly, the tunings of these guitars are much lower.

Do you know what strings are needed for a certain tuning?

The list of musicians and groups is also far from complete. If you have suggestions for adding to the article or questions about what tuning a certain group plays in, write in the comments!

Non-classical settings are used for the convenience of playing certain musical genres or pieces of music.

Classic setting method

  1. tuning fork
  2. The 1st string is used to tune the 2nd string, which, being pressed at the V fret, should sound the same as the 1st open (not pressed) string.
  3. The 3rd string, pressed at the 4th fret, is tuned to the 2nd open string.
  4. The 4th string, pressed on the V fret, is tuned to the 3rd open string.
  5. The 5th string, pressed at the V fret, is tuned to the 4th open string.
  6. The 6th string, pressed at the V fret, is tuned to the 5th open string.

Tuning with harmonics and temperament

Allows for much more precise tuning, since the accuracy of the frets is not always sufficient.

  1. The 1st string is tuned using the reference sound - the sound of a tuning fork - or the sound of an already tuned musical instrument.
  2. The 6th string is tuned so that its harmonic at the 5th fret sounds in unison with the 1st string.
  3. The 5th string is tuned so that its harmonic at the 7th fret sounds in unison with the 1st string, and then it is slightly pulled up so that a beat occurs with a frequency of 0.372 Hz (one beat in 2.7 seconds).
  4. The 4th string is tuned so that its harmonic at the 7th fret sounds in unison with the harmonic of the 5th string at the 5th fret, and then slightly tightened so that a beat occurs with a frequency of 0.497 Hz (one beat per 2.01 seconds).
  5. The 3rd string is tuned so that its harmonic at the 7th fret sounds in unison with the harmonic of the 4th string at the 5th fret, and then slightly tightened so that a beat occurs with a frequency of 0.664 Hz (one beat per 1.51 seconds).
  6. The 2nd string is tuned so that its harmonic on the 5th fret sounds almost in unison with the harmonic of the 1st string on the 7th fret, but is just a little short so that beats with a frequency of 1.12 Hz are heard (one beat per 0.9 seconds).

When tuning using the tuning fork A (“A”), the 5th string is tuned first (the harmonic on the V fret in unison with the tuning fork), then the 1st and 6th, and then the 4th, 3rd and 2nd.

With good hearing, having accumulated sufficient experience, you can do without using harmonics, catching the beat of overtones in the sound open strings.

Since changing the string tension leads to deformation of the guitar body and detuning of the remaining strings, it is recommended to tune the guitar in 2-3 iterations, the first of which can be done without temperament (without carefully counting the beat frequency).

Lower tunings of a six-string guitar

Decreased (i.e. lower than the normal EBGDAE tuning) tunings are used for more comfortable playing a certain key, or to obtain a lower, “heavy” sound. In particular, many rock guitarists love the so-called. Drop tunings, which are named by adding to “Drop” a note on the 6th string that drops 1 tone below the first (for example: Drop C = DAFCGC). To rebuild from classical system in any lowered mode, all the strings of the guitar are lowered by a certain interval (for example, to change to tuning D, you need to lower all the strings of the guitar by a tone). To lower the guitar's tuning by more than a tone, you may need to change the strings to thicker ones due to the weakening of their tension. Also, for tunings below B (B), mostly baritone guitars are used.

String Scale E♭ (E-flat) Build D (re) Scale D♭ (D-flat) Build C (before) System B (si)
Note Frequency (in hertz) Note Frequency Note Frequency Note Frequency Note Frequency
First e♭¹ (E-flat first octave) 311.13 d¹ (D first octave) 293.66 d♭¹ (D-flat first octave) 277.18 c¹ (to the first octave) 261.63 b (B small octave) 246.94
Second b♭ (B-flat small octave) 233.08 a (A small octave) 220.00 a♭ (A-flat small octave) 207.00 g (small octave sol) 196.00 g♭ (G-flat small octave) 185.00
Third g♭ (G-flat small octave) 185.00 f (f small octave) 174.62 e (minor octave E) 164.81 e♭ (small octave E-flat) 155.56 d (small octave D) 147.83
Fourth d♭ (D-flat small octave) 138.59 c (to small octave) 130.82 B (big octave B) 123.48 B♭ (B-flat major octave) 116.54 A (A major octave) 110.00
Fifth A♭ (A-flat major octave) 103.80 G (major octave G) 98.00 G♭ (G flat major octave) 92.50 F (major octave F) 87.31 E (major octave E) 82.41
Sixth E♭ (major octave E-flat) 77.78 D (major octave D) 73.91 D♭ (D-flat major octave) 69.30 C (to major octave) 65.41 B¹ (B counter octave) 61.74
Sheet music



Open C

One of characteristic features is the ease of extracting basic major chords. A simple barre at the 2nd fret will give "D", 4th fret will give "E", 5th fret will give "F" and so on. Open strings will give you "C".

In order to tune a guitar in “Open C”, you need (starting from the “standard tuning”): 1st string (thin) Leave as in the “standard tuning” - “E” (“E”)
2nd string. Raise half a step to “C” (“C”)
3rd string. Leave as in “standard tuning” - “Salt” (“G”)
4th string. Lower one step to “Before” (“C”)
5th string. Lower one step to “Salt” (“G”)
6th string (thick). Lower by two steps from “E” to “Do” (“C”)

Raised tunings of a six-string guitar

Tuning a guitar, especially a classical one, can damage the instrument., as well as to injuries due to a sudden break of a tightened string.

To increase the tuning, you can use a capo. If rebuilding your guitar is necessary, it is recommended to use a thinner set of strings.

String Build F (fa) Tuning F# (F-sharp) Tuning G (sol) G# scale (G sharp) System A (la)
Note Frequency (in hertz) Note Frequency Note Frequency Note Frequency Note Frequency
First f¹ (fa first octave) 349.23 f¹# (F-sharp first octave) 369.99 g¹ (sol of the first octave) 392.00 g¹# (G-sharp first octave) 415.30 a¹ (A first octave) 440.00
Second с¹ (to the first octave) 261.63 с¹# (C-sharp of the first octave) 277.18 d¹ (D first octave) 293.66 D¹# (D-sharp first octave) 311.13 e¹ (E first octave) 311.13
Third g# (G-sharp small octave) 207.00 a (A small octave) 220.00 a# (A-sharp small octave) 233.08 b (B small octave) 246.94 c¹ (to the first octave) 261.63
Fourth d# (d-sharp small octave) 155.56 e (minor octave E) 164.81 f (f small octave) 174.62 f# (F-sharp small octave) 185.00 g (small octave sol) 196.00
Fifth A# (A-sharp major octave) 116.54 B (big octave B) 123.48 c (to small octave) 130.82 c# (C-sharp small octave) 138.59 d (small octave D) 147.83
Sixth F (major octave F) 87.31 F# (F-sharp major octave) 92.50 G (major octave G) 98.00 G# (G-sharp major octave) 103.80 A (A major octave) 110.00
Sheet music




"Drop D" formation

This tuning differs from the classical one in that it is lowered by tone sixth string. It is often used by hard rock electric guitarists because it makes it easier to play 5th chords. power-chord), also some works were written for him classical guitar(in the keys of D major and D minor).

"Drop C" formation

Used to produce an even lower and “heavier” sound on an electric guitar. Unlike the classical system, all strings except the sixth tune in to tone below and sixth string- on two tones.
Like Drop tuning D is used to play fifth chords.

Double Drop-D formation

The tuning is similar to Drop D, differing in that the first string is lowered a tone. For tuning from classical tuning first And sixth the string is lowered to tone.
In this tuning, the top four open strings of the guitar form a G major chord, making it easier to play with slide. Double drop D was often used by performer Neil Young.

Build "DADGAD"

The tuning most often used in folk music. It was invented by British guitarist David Graham for more convenient playing from notes recorded for violin or bagpipes.
To change the “DADGAD” system from the classic one, you need to lower it to tone first, second And sixth strings.

Build "DADDAD"

The “Papa-Papa” tuning is most suitable both for use in folk music (Celtic) and for playing rhythm guitar parts in “heavy” (alternative) music, 4 notes at a time. To change the tuning “DADDAD” from the classical one, you need to lower it to tone first, second And sixth strings. A third tune in unison with fourth.

Build "Open D"

In this tuning, the open strings form a D major chord. It is used primarily on slide guitars.
To rebuild into this system from the classical first, second And sixth strings drop to tone, third goes down to semitone.

"Open G" build

In this tuning, the open strings form a G major chord.
To change to "Open G" tuning from the classic first, fifth And sixth strings drop to tone.

"New Standard"

Also known as "Crafty tuning". A tuning developed by musician Robert Fripp and used by him since 1983. In contrast to the classical “quart” tuning, the tuning proposed by Robert Fripp is closer to bowed string instruments, and first, second And third the strings are tuned similarly to a violin. Tuning to this tuning may require replacing the lower strings with thicker ones and the upper strings with thinner ones.

"Alternative tuning Cross A"

E-A-E-A-E-A. "Sitar A" is an alternative lowered guitar tuning. Reminds me of the sound of an Indian sitar. Great for creating Indian (oriental) music.

Seven-string tunings

Standard

The structure of the strings of a seven-string guitar is mixed - terts-quart, so the chord of the open strings is consonant (major quartet-sixth chord), in contrast to six string guitar. This system is considered classical (academic).