A natural question arises: "how to tune a 6 string guitar for a beginner?". If you have big plans and want to become a guitarist from God, at a minimum you need to be able to tuning your guitar correctly. But even if there are no such plans, you will still have to tune the guitar).
“I can’t tune my guitar” is a phrase you can often hear from a beginning guitarist, but first, let’s figure out how the strings should be tuned. The strings on a guitar are numbered from bottom to top, from the thinnest string to the thickest..
10 Tips: How to Play Guitar with Good Technique
With classic guitar tuning The 6th string is tuned to , the Latin designation "E" is often used. Usually the sixth string is tuned first, and the rest from there, but more on that a little later. This is how the strings should be tuned when classical system:
- e (the first, thinnest string is the note "E")
- B (second string, note "B")
- G (third string, G note)
- D (fourth string, note "D")
- A (fifth string, note "A")
- E (the sixth, thickest string is the note "E")
Now that we know how the strings should be tuned, let's try to tune them. By the way, you know ? To do this, we will use pegs or, as some beginners call them, “twisters”). can be turned in one or the other direction.
By turning the peg clockwise we tighten the string, giving it a higher sound, and accordingly turning it counterclockwise we loosen the string and it sounds lower.
At setting 6 string guitar twist you need to be careful so as not to break the string, especially for beginner guitarists. With experience, you will feel the tension of the string much more accurately, but for now, be more careful and turn the “twists” carefully.
Tuning the 6th string
First of all, we tune the sixth string on the guitar. To do this, we need a so-called reference sound, specifically the note “E”. Where can I get it? You can listen to it on our website, take it on another tuned musical instrument, you can use a tuning fork, or go to YouTube and search for “E notes for guitar tuning” or something like that.
Some people have perfect pitch and can determine the pitch of a note without using the above methods. This quality of hearing can be developed, but as a rule it is innate. However, not all professionals have such skills, so the method proposed below is used by both experienced guitarists and beginners.
And so, we have found a “sample” note, let’s start tuning. Tuning a 6-string guitar, as well as playing any other musical instrument, requires at least some degree of hearing. The presence of hearing in a beginner is very easy to determine, if you are able to distinguish which of two notes sounds higher and which lower, then you definitely have hearing. This is what we need now.
How to learn to play guitar from scratch at home?
Play standard note "mi" and at the same time start plucking the sixth string of your guitar. Do you feel the difference? Does your guitar string sound lower than the reference note? So you need to tighten it up a little, twist smoothly and continue tuning the 6th string until our string and the reference note sound . Try tightening and loosening the string a little until you achieve the desired sound.
Tuning the rest of the strings
can be tuned in a similar way, using standard notes, but as a rule, “in everyday life” they are tuned relative to the 6th string. The procedure is as follows:
We will use the 6th string clamped on the 5th fret and the 5th string open (that is, not clamped on any fret). We alternately pluck the fifth and sixth strings and adjust the sound of the fifth string until we achieve unison.
The remaining strings are tuned according to a similar pattern, but with a slight correction (pay attention to the setting of the second string). I will describe the entire string tuning scheme:
- Sixth string - tune either by reference note or by ear.
In this article I want to clarify a little guitar tunings. What are they, why were they formed this way, and how to generally tune your guitar. Firstly, a little educational information. The order is indicated by letters. Letters are notes that give open strings from the sixth (the thickest) to the first (the thinnest). Let's start with, so to speak, the standard - this standard guitar tuning.
Standard tuning E A D G B E (E)
In this tuning, the guitar is tuned in fourths, i.e. the interval between each string is a fourth. Read what it is. The exception is the second and third strings, the interval between which is a major third. They say in the jargon that the guitar is tuned in "E", i.e. these are the notes on the first and sixth strings. By tuning your guitar in this tuning, you can easily play regular full chords, major and minor. And in general, it seems to me that 90% of all songs can be played in it.
Low tuning Eb Ab Db Gb Bb Eb (E flat)
If all strings are tuned to standard tuning and lower each by a semitone, then we get low pitch E flat. The intervals between the strings are the same as in standard system Mi. What is this system used for? Mainly to make it easier for the vocalist to sing or for a lower and heavier sound (for example in heavy metal and other rock music).
Low tuning D G C F A D (D)
If in the standard tuning all the strings are lowered even lower - by 2 semitones, then we get the D tuning. Here also the intervals are preserved. Essentially all lower tunings of this type are just standard tunings with a lower tuning. Used again for a heavier and lower sound, for example in heavy metal. The standard can be lowered further and get, for example, C (to). The meaning will be the same.
Dropped D: D A D G B E
Now this is more interesting. Take the E standard and lower the 6th string to whole tone. Now we have 2 D notes on open strings. Fifths on the sixth string are pressed not with 2 fingers, as in the standard one, but with one. This is probably the most popular tuning in alternative metal. Gives a meatier sound and expands the guitar's range. Well, convenience appears when playing fifths (power chords).
Dropped C: C G C F A D
Everything is the same as in the case of Drop D, only we take the lowered tuning of D as a basis and also lower the sixth string an additional tone. The favorite tuning of all metalcore players.
So, by equivalently lowering the strings, you can tune the guitar even higher or lower. That is, in fact, all these tunings above are variations of 2 tunings: standard and drop. They are probably the most popular among guitarists. Using just them, you can play 99% of all the songs in the world with ease. In addition to them, there are also a lot of non-standard tunings, but they are quite rarely used. And in general, you yourself can even come up with your own guitar tuning and figure out how to play it =)
Non-classical settings are used for the convenience of playing certain musical genres or pieces of music.
Classic setting method
- tuning fork
- The 1st string is used to tune the 2nd string, which, being pressed at the V fret, should sound the same as the 1st open (not pressed) string.
- The 3rd string, pressed at the 4th fret, is tuned to the 2nd open string.
- The 4th string, pressed on the V fret, is tuned to the 3rd open string.
- The 5th string, pressed at the V fret, is tuned to the 4th open string.
- The 6th string, pressed at the V fret, is tuned to the 5th open string.
Tuning with harmonics and temperament
Allows for much more precise tuning, since the accuracy of the frets is not always sufficient.
- The 1st string is tuned using the reference sound - the sound of a tuning fork - or the sound of an already tuned musical instrument.
- The 6th string is tuned so that its harmonic at the 5th fret sounds in unison with the 1st string.
- The 5th string is tuned so that its harmonic at the 7th fret sounds in unison with the 1st string, and then it is slightly pulled up so that a beat occurs with a frequency of 0.372 Hz (one beat in 2.7 seconds).
- The 4th string is tuned so that its harmonic at the 7th fret sounds in unison with the harmonic of the 5th string at the 5th fret, and then slightly tightened so that a beat occurs with a frequency of 0.497 Hz (one beat per 2.01 seconds).
- The 3rd string is tuned so that its harmonic at the 7th fret sounds in unison with the harmonic of the 4th string at the 5th fret, and then slightly tightened so that a beat occurs with a frequency of 0.664 Hz (one beat per 1.51 seconds).
- The 2nd string is tuned so that its harmonic on the 5th fret sounds almost in unison with the harmonic of the 1st string on the 7th fret, but is just a little short so that beats with a frequency of 1.12 Hz are heard (one beat per 0.9 seconds).
When tuning using the tuning fork A (“A”), the 5th string is tuned first (the harmonic on the V fret in unison with the tuning fork), then the 1st and 6th, and then the 4th, 3rd and 2nd.
If you have good hearing and have gained enough experience, you can do without using harmonics, catching the beat of overtones in the sound of open strings.
Since changing the string tension leads to deformation of the guitar body and detuning of the remaining strings, it is recommended to tune the guitar in 2-3 iterations, the first of which can be done without temperament (without carefully counting the beat frequency).
Lower tunings of a six-string guitar
Decreased (i.e. lower than the normal EBGDAE tuning) tunings are used for more comfortable playing a certain key, or to obtain a lower, “heavy” sound. In particular, many rock guitarists love the so-called. Drop tunings, which are named by adding to “Drop” a note on the 6th string that drops 1 tone below the first (for example: Drop C = DAFCGC). To rebuild from classical system in any lowered mode, all the strings of the guitar are lowered by a certain interval (for example, to change to tuning D, you need to lower all the strings of the guitar by a tone). To lower the guitar's tuning by more than a tone, you may need to change the strings to thicker ones due to the weakening of their tension. Also, for tunings below B (B), mostly baritone guitars are used.
| String | Scale E♭ (E-flat) | Build D (re) | Scale D♭ (D-flat) | Build C (before) | System B (si) | |||||
|---|---|---|---|---|---|---|---|---|---|---|
| Note | Frequency (in hertz) | Note | Frequency | Note | Frequency | Note | Frequency | Note | Frequency | |
| First | e♭¹ (E-flat first octave) | 311.13 | d¹ (D first octave) | 293.66 | d♭¹ (D-flat first octave) | 277.18 | c¹ (to the first octave) | 261.63 | b (B small octave) | 246.94 |
| Second | b♭ (B-flat small octave) | 233.08 | a (A small octave) | 220.00 | a♭ (A-flat small octave) | 207.00 | g (small octave sol) | 196.00 | g♭ (G-flat small octave) | 185.00 |
| Third | g♭ (G-flat small octave) | 185.00 | f (f small octave) | 174.62 | e (minor octave E) | 164.81 | e♭ (small octave E-flat) | 155.56 | d (small octave D) | 147.83 |
| Fourth | d♭ (D-flat small octave) | 138.59 | c (to small octave) | 130.82 | B (big octave B) | 123.48 | B♭ (B-flat major octave) | 116.54 | A (A major octave) | 110.00 |
| Fifth | A♭ (A-flat major octave) | 103.80 | G (major octave G) | 98.00 | G♭ (G flat major octave) | 92.50 | F (major octave F) | 87.31 | E (major octave E) | 82.41 |
| Sixth | E♭ (major octave E-flat) | 77.78 | D (major octave D) | 73.91 | D♭ (D-flat major octave) | 69.30 | C (to major octave) | 65.41 | B¹ (B counter octave) | 61.74 |
| Sheet music |  |
 |
 |
 |
||||||
Open C
One of characteristic features is the ease of extracting basic major chords. A simple barre on the 2nd fret will give "D", 4th fret will give "E", 5th fret will give "F" and so on. Open strings will give you "C".
In order to tune a guitar in “Open C”, you need (starting from the “standard tuning”): 1st string (thin) Leave as in the “standard tuning” - “E” (“E”)
2nd string. Raise half a step to “C” (“C”)
3rd string. Leave as in “standard tuning” - “Salt” (“G”)
4th string. Lower one step to “Before” (“C”)
5th string. Lower one step to “Salt” (“G”)
6th string (thick). Lower by two steps from “E” to “Do” (“C”)
Raised tunings of a six-string guitar
Tuning a guitar, especially a classical one, can damage the instrument., as well as to injuries due to a sudden break of a tightened string.
To increase the tuning, you can use a capo. If rebuilding your guitar is necessary, it is recommended to use a thinner set of strings.
| String | Build F (fa) | Tuning F# (F-sharp) | Tuning G (sol) | G# scale (G sharp) | System A (la) | |||||
|---|---|---|---|---|---|---|---|---|---|---|
| Note | Frequency (in hertz) | Note | Frequency | Note | Frequency | Note | Frequency | Note | Frequency | |
| First | f¹ (fa first octave) | 349.23 | f¹# (F-sharp first octave) | 369.99 | g¹ (sol of the first octave) | 392.00 | g¹# (G-sharp first octave) | 415.30 | a¹ (A first octave) | 440.00 |
| Second | с¹ (to the first octave) | 261.63 | с¹# (C-sharp of the first octave) | 277.18 | d¹ (D first octave) | 293.66 | D¹# (D-sharp first octave) | 311.13 | e¹ (E first octave) | 311.13 |
| Third | g# (G-sharp small octave) | 207.00 | a (A small octave) | 220.00 | a# (A-sharp small octave) | 233.08 | b (B small octave) | 246.94 | c¹ (to the first octave) | 261.63 |
| Fourth | d# (d-sharp small octave) | 155.56 | e (minor octave E) | 164.81 | f (f small octave) | 174.62 | f# (F-sharp small octave) | 185.00 | g (small octave sol) | 196.00 |
| Fifth | A# (A-sharp major octave) | 116.54 | B (big octave B) | 123.48 | c (to small octave) | 130.82 | c# (C-sharp small octave) | 138.59 | d (small octave D) | 147.83 |
| Sixth | F (major octave F) | 87.31 | F# (F-sharp major octave) | 92.50 | G (major octave G) | 98.00 | G# (G-sharp major octave) | 103.80 | A (A major octave) | 110.00 |
| Sheet music |  |
 |
 |
 |
 |
|||||
"Drop D" formation
This tuning differs from the classical one in that it is lowered by tone sixth string. It is often used by hard rock electric guitarists because it makes it easier to play 5th chords. power-chord), also some works were written for him classical guitar(in the keys of D major and D minor).
"Drop C" formation
Used to produce an even lower and “heavier” sound on an electric guitar. Unlike the classical system, all strings except the sixth tune in to tone below and sixth string- on two tones.
Like Drop tuning D is used to play fifth chords.
Double Drop-D formation
The tuning is similar to Drop D, differing in that the first string is lowered a tone. For tuning from classical tuning first And sixth the string is lowered to tone.
In this tuning, the top four open strings of the guitar form a G major chord, making it easier to play with slide. Double drop D was often used by performer Neil Young.
Build "DADGAD"
The tuning most often used in folk music. It was invented by British guitarist David Graham for more convenient playing from notes recorded for violin or bagpipes.
To reorganize the “DADGAD” system from the classic one, it is necessary to lower it to tone first, second And sixth strings.
Build "DADDAD"
The “Papa-Papa” tuning is most suitable both for use in folk music (Celtic) and for playing rhythm guitar parts in “heavy” (alternative) music, 4 notes at a time. To change the tuning “DADDAD” from the classical one, you need to lower it to tone first, second And sixth strings. A third tune in unison with fourth.
Build "Open D"
In this tuning, the open strings form a D major chord. It is used primarily on slide guitars.
To rebuild into this system from the classical first, second And sixth strings drop to tone, third goes down to semitone.
"Open G" build
In this tuning, the open strings form a G major chord.
To change to "Open G" tuning from the classic first, fifth And sixth strings drop to tone.
"New Standard"
Also known as "Crafty tuning". A tuning developed by musician Robert Fripp and used by him since 1983. Unlike the classical “quart” tuning, the tuning proposed by Robert Fripp is closer to bowed string instruments, and first, second And third the strings are tuned similarly to a violin. Tuning to this tuning may require replacing the lower strings with thicker ones and the upper strings with thinner ones.
"Alternative tuning Cross A"
E-A-E-A-E-A. "Sitar A" is an alternative lowered guitar tuning. Reminds me of the sound of an Indian sitar. Great for creating Indian (oriental) music.
Seven-string tunings
Standard
The structure of the strings of a seven-string guitar is mixed - third-fourth, so the chord of the open strings is consonant (major quarter-sixth chord), unlike a six-string guitar. This system is considered classical (academic).
Beginner guitarists often wonder: what tuning does this or that favorite rock band play in? How to tune a guitar so that you can comfortably play known and favorite songs? In this article I will briefly give examples of guitar tunings in rock music and their representatives (musicians, bands).
I will immediately give a list of the notations used:
- C - note C
- D - note D
- E - note E
- F - note Fa
- G - note Sol
- A - note A
- B (or H) - note B
- # - sharp - raising a note by a semitone. Half a tone on a guitar - one fret.
- b - flat - lowering the note by a semitone.
- The notes in the tuning tablatures are arranged in order from the 1st (thin) string to the 6th (thick) string. For example, E B G D A E.
1. Standard, E (standard, Spanish or classical tuning).
The simplest and most famous guitar tuning. Tablature of the system: E B G D A E - Mi Si Sol Re La Mi. This system is used mainly by rock music luminaries, old-school musicians and adherents of light genres.
Groups and musicians who play in standard tuning:
- AC/DC
- Led Zeppelin
- Metallica
- Gun's & Roses
- Nightwish
- Deep Purple
- Nirvana (semitone lower)
- Blink 182
- Sum 41
- Joe Satriani
- Carlos Santana
- Aria, Kipelov (half a tone lower)
- Nickelback
- Placebo
- Rage Against The Machine
- Queen
- Red Hot Chili Peppers
- Rise Against
- Scorpions
- Steve Vai
- Chuck Berry
- Bon Jovi
- 30 Seconds To Mars
2. Drop D (lowered D)
This tuning differs from the standard one in that the 6th string on the guitar is lowered one tone. In consonance with the 4th and 5th strings it gives an octave. Tablature: E B G D A D. Like any lowered tuning, it is convenient in that you can play “zeros” (so-called open strings) and previously familiar chords can be pressed with just one finger, plus two more low chords are added that are not available when playing standard system.
Bands that play Drop tuning D:
- Asking Alexandria
- Avenged Sevenfold
- Evanescence
- Linkin Park (later albums)
- Papa Roach
- Rage Against The Machine
- three days Grace
- Thousand Foot Krutch
- Queens of the Stone Age
- Deftones
- fall out Boy
- Shinedown
- Amatory
3. Drop C# (lowered C sharp)
This is a tuning in which all the strings are lowered by another semitone, unlike the D tuning. Tablature: D# A# F# C# G# C#.
Bands that play in the Drop C# tuning:
- Linkin Park
- Attack! Attack!
- Breaking Benjamin
- Papa Roach (some songs from recent years)
- Limp Bizkit
- H-Blockx
- Staind
- Deftones
4. Drop C (lowered C)
This lowered tuning is quite common in alternative and metalcore music. Tablature: D A F C G C.
Bands that play in the Drop C tuning:
- Bullet For My Valentine
- As I Lay Dying
- Atreyu
- Periphery
- three days Grace
- System of a Down
- Godsmack
- Nine Lashes
- Breaking Benjamin
- 12 Stones
- Disturbed
- Lumen
- Nickelback
- Skillet
- Rammstein
- Evans Blue
- August Burns Red
5. Drop B (lowered C)
The low B tuning is an alternative to the standard seven-string guitar tuning. It allows you to customize six string guitar as low as a seven-string would sound, plus it makes it easier to play chords. Tablature: C# G# E B F# B. Seven-string guitar tablature: E B G D A E B.
Bands that play in the Drop B tuning:
- Parkway Drive
- Slipknot
- Thousand Foot Krutch
- Bleeding Through
- Linkin Park
- Amatory
- Limp Bizkit
- Skillet
- Veil of Maya
- Stigmata
6. Drop A# (lowered A sharp)
This tuning is also an alternative to the seven-string guitar lowered by a semitone. Tablature: C G D# A# F A#. Seven-string guitar tablature: D# A# F# C# G# D# A#.
Bands that play in the Drop A# tuning:
- Bring Me The Horizon
- Parkway Drive
- Breaking Benjamin
- Obey The Brave
- The Ghost Inside
- Korn (7-strings)
7. Drop A (lowered A)
Extremely low build. Tablature: B F# D A E A. Seven-string guitar tablature: D A F C G D A.
Bands that play in Drop A tuning:
- My Autumn
- Betraying The Martyrs
- Emmure
- Born Of Osiris
- Within The Ruins
This is not a complete list of all guitar tunings. In addition to standard and lowered schemes, others are used: for example, when not only the 6th string is lowered, but also the 1st string. This technique is used in blues; it allows you to produce beautiful sounds by playing a slide on the first three strings. Also, in addition to seven-string guitars and baritones (guitars with an increased scale), there are now eight-string and even nine-string electric guitars. Accordingly, the tunings of these guitars are much lower.
Do you know what strings are needed for a certain tuning?
The list of musicians and groups is also far from complete. If you have suggestions for adding to the article or questions about what tuning a certain group plays in, write in the comments!
Many guitarists wonder which strings will best suit their tuning. When choosing, it is worth remembering that preferences for tension and string diameter are a very individual thing. It is for this reason that you should not take information from of this material as an absolute truth: we will present the most generalized and averaged data, according to which you can choose the optimal thickness of the set to suit your preferences.
For ease of reading the article, we will use whole string thickness designations (for example, 9-42 instead of 0.009-0.042).
Factors influencing the choice of string thickness
- Guitar scale: the longer it is, the tighter the strings will be, all other things being equal. In the table below we will be using the standard 25.5" scale. If you have a guitar with a smaller scale, then you will need to make a slight adjustment and go with a thicker set.
- String tension: The higher their tension, the thicker the strings - accordingly, they have a more powerful and voluminous sound. However, on the other hand, thicker strings have a smaller vibration amplitude, which is why their sound is not as rich in overtones, it is duller and flatter - this is especially audible on thin strings without winding.
- Third string: in most sets this is not wound (plain). In sets with a first string thickness of 12 or more, the third string is usually wrapped. IN in this case It’s worth considering that braiding increases tension - you’ll have to forget about bending by one and a half to two tones, although, on the other hand, in lowered tunings The third wound string sounds much fuller and richer.
- Today you can buy guitar strings in balanced sets (8-38, 9-42, 10-46, 11-50, 12-54, 13-56, etc.) and unbalanced(9-46, 10-52, 11-52, 12-56/60, etc.)
The former are usually used for standard tuning or tuning lowered across all strings by an equal number of semitones. The second type is ideal for lovers of drop tunings (the 6th string is lowered by a whole tone), as well as for those who use hybrid and open settings guitars.
- The thickest sets of strings (12-60, 13-72, etc.) are best suited for long-scale guitars - baritones. They have a scale length of 26 inches or more, and are used in very low tunings (for example, Standard A and lower).
In principle, such kits can also be used for instruments with a standard scale for deeply lowered action, however, before purchasing, you should consider a couple of nuances:
- You may simply not have enough scale adjustment options at the bridge, since lower tuning requires retuning. In this case, either replacing the bridge or switching to a thinner set will help.
- If you use a thicker set, you will either bore out the string grooves on the nut or simply won't be able to fit the strings into them. When going back to more thin strings, they will hang around in the bored grooves, making it difficult to fine-tune the guitar.
In addition, thick strings may not fit into the peg - it will also have to be bored.
Which strings are suitable for a particular tuning?
|
Guitar tuning |
Matching String Sets |
|
Standard E |
8-38 is a specific set that is more suitable for experienced musicians. The very small diameter allows you to make microbends simply by pressing the strings harder against the frets (this is especially effective when using a scalloped neck). From famous musicians Yngwie Malmsteen is a fan of this set 9-42 - suitable for a beginning musician, installed on all production Fender guitars 10-46 is perhaps the most popular caliber for standard action: the perfect balance between comfort and tone. 9.5-44 - a compromise set for lovers of dynamic sound and frequent bends 11-50 - a favorite set of musicians performing blues and light rock: allows you to swing the guitar wood to full power 12-54 - suitable, for example, for guitars with voids inside the soundboard when playing jazz and blues. High tension |
|
9-46 - similar to the classic 9-42 set for drop tuning 10-52 - analogue of the 10-46 kit for drop tuning 10-50 is not a very popular set, which, according to many musicians, is more balanced for drops and more pleasant to play than 10-52 10-60 - an unbalanced kit for those who play heavy music, this kit is used by Zakk Wylde 11-54 - bright and powerful sound when playing harmonic parts on low strings 11-56 - the most spacious and deep sound, suitable for musicians with strong fingers |
|
|
Standard D |
10-46 - light bends, tension below average. For singing lead parts 11-50 - perfectly balanced tension 12-54 - above average tension: every bluesman's dream 13-56 - strong tension, deep and powerful tone |
|
10-60 is a good choice for this tuning: 1-3 strings stretch well, low strings sound monolithic and deep 11-52 - minimum thickness for this tuning, tension below average 11-54 - classic set for drop C 11-56 - enhanced sound of low strings, the difference is not always noticeable 12-54 - thicker high strings, more suitable for playing harmonic parts 12-60 - strong tension, good choice for heavy music with minimum quantity lead party |
|
|
Standard A |
14-68 - medium tension, excellent balance |
Helpful tip: If you want to tune your guitar to B Standard or lower, consider buying a baritone or 7-string guitar - you need to understand that not all types of 6-string electric guitars are designed for experimenting with strong detuning.
Let us repeat that these recommendations are conditional and partly subjective. Suffice it to remember the great SRV, which used the 13-56 kit for the Standard Eb build: therefore, the most important thing is your feelings. Try several different sets, experiment - and you will certainly find the optimal set for your music!
Based on materials from an article by Egor Kalgannikov, 12.2013.