Types of guitar tunings. Classification of guitar tunings Alternative tuning of a 6 string guitar

In this article I want to bring some clarity to guitar tunings. What are they, why were they formed this way, and how to generally tune your guitar. Firstly, a little educational information. The order is indicated by letters. The letters are the notes that produce the open strings from the sixth (thickest) to the first (thinnest). Let's start with, so to speak, the standard - this standard guitar tuning.

Standard tuning E A D G B E (E)

In this tuning, the guitar is tuned in fourths, i.e. the interval between each string is a fourth. Read what it is. The exception is the second and third strings, the interval between which is a major third. They say in the jargon that the guitar is tuned in "E", i.e. these are the notes on the first and sixth strings. By tuning your guitar in this tuning, you can easily play regular full chords, major and minor. And in general, it seems to me that 90% of all songs can be played in it.

Low tuning Eb Ab Db Gb Bb Eb (E flat)

If all the strings are tuned to standard tuning and each one is lowered by a semitone, then we get low pitch E flat. The intervals between the strings are the same as in standard system Mi. What is this system used for? Mainly to make it easier for the vocalist to sing or for a lower and heavier sound (for example in heavy metal and other rock music).

Low tuning D G C F A D (D)

If in the standard tuning all the strings are lowered even lower - by 2 semitones, then we get the D tuning. Here also the intervals are preserved. Essentially all lower tunings of this type are just standard tunings with a lower tuning. Used again for a heavier and lower sound, for example in heavy metal. The standard can be lowered further and get, for example, C (to). The meaning will be the same.

Dropped D: D A D G B E

Now this is more interesting. Take the E standard and lower the 6th string to whole tone. Now we have 2 notes D on open strings Oh. Fifths on the sixth string are pressed not with 2 fingers, as in the standard one, but with one. This is probably the most popular tuning in alternative metal. Gives a meatier sound and expands the guitar's range. Well, convenience appears when playing fifths (power chords).

Dropped C: C G C F A D

Everything is the same as in the case of Drop D, only we take the lowered tuning of D as a basis and also lower the sixth string an additional tone. The favorite tuning of all metalcore players.

So, by equivalently lowering the strings, you can tune the guitar even higher or lower. That is, in fact, all these tunings above are variations of 2 tunings: standard and drop. They are probably the most popular among guitarists. Using just them, you can play 99% of all the songs in the world with ease. In addition to them, there are also a lot of non-standard tunings, but they are quite rarely used. And in general, you yourself can even come up with your own guitar tuning and figure out how to play it =)

Many guitarists wonder which strings will best suit their tuning. When choosing, it is worth remembering that preferences for tension and string diameter are a very individual thing. It is for this reason that you should not take the information from this material as an absolute truth: we will provide the most generalized and averaged data, according to which you can choose the optimal thickness of the set to suit your preferences.

For ease of reading the article, we will use whole string thickness designations (for example, 9-42 instead of 0.009-0.042).

Factors influencing the choice of string thickness

• Guitar scale: the longer it is, the tighter the strings will be, all other things being equal. In the table below we will be using the standard 25.5" scale. If you have a guitar with a smaller scale, then you will need to make a slight adjustment and go with a thicker set.
• String tension: The higher their tension, the thicker the strings - accordingly, they have a more powerful and voluminous sound. However, on the other hand, thicker strings have a smaller vibration amplitude, which is why their sound is not as rich in overtones, it is duller and flatter - this is especially audible on thin strings without winding.
• Third string: in most sets this is not wound (plain). In sets with a first string thickness of 12 or more, the third string is usually wrapped. IN in this case It’s worth considering that braiding increases tension - you’ll have to forget about bending by one and a half to two tones, although, on the other hand, in lowered tunings The third wound string sounds much fuller and richer.
• Today you can buy guitar strings in balanced sets (8-38, 9-42, 10-46, 11-50, 12-54, 13-56, etc.) and unbalanced(9-46, 10-52, 11-52, 12-56/60, etc.)

The former are usually used for standard tuning or a tuning lowered across all strings by an equal number of semitones. The second type is ideal for lovers of drop tunings (the 6th string is lowered by a whole tone), as well as for those who use hybrid and open settings guitars.

• The thickest sets of strings (12-60, 13-72, etc.) are best suited for long-scale guitars - baritones. They have a scale length of 26 inches or more, and are used in very low tunings (for example, Standard A and lower).

In principle, such kits can also be used for instruments with a standard scale for deeply lowered tuning, but before purchasing you should consider a couple of nuances:

• You may simply not have enough scale adjustment options at the bridge, since lower tuning requires retuning. In this case, either replacing the bridge or switching to a thinner set will help.
• If you use a thicker set, you will either bore out the string grooves on the nut or simply won't be able to fit the strings into them. When going back to more thin strings, they will hang around in the bored grooves, making it difficult to fine-tune the guitar.

In addition, thick strings may not fit into the peg - it will also have to be bored.

Which strings are suitable for a particular tuning?

Helpful Tip: If you want to tune your guitar to B Standard or lower, consider buying a baritone or 7- string guitar- you need to understand that not all types of 6-string electric guitars are intended for experiments with strong lowering of the tuning.

Let us repeat that these recommendations are conditional and partly subjective. Suffice it to remember the great SRV, which used the 13-56 kit for the Standard Eb build: therefore, the most important thing is your feelings. Try several different sets, experiment - and you will certainly find the optimal set for your music!

Based on materials from an article by Egor Kalgannikov, 12.2013.

The guitar is one of the most famous and at the same time unpredictable instruments that can touch the most sensual strings of the soul. But the guitar itself also has them.

Few people pay attention to the name of the strings on a guitar, considering it completely unnecessary. But often the performance of any composition depends on the setting. Any dissonance causes associative rejection of the composition as a whole. But in this material The focus will be on instrument tuning and use for beginning players.

Guitar string name: classic version

In general, it is considered a classic. However, one can recall quite a lot of examples of great composers who preferred seven strings to six (at least Vysotsky).

However, according to music theory and solfeggio, the names of the strings do not differ at all. Based on the rules established general theory music, the notes by which any instrument is built have their own names and abbreviations in the form of Latin symbols and language interpretations. In our case it is:

• C - to.
• D - re.
• E - mi.
• F - fa.
• G - salt.
• A - la.
• H - B (B - B-flat is indicated separately).

(sharps, flats, bekars or their double versions) are applied accordingly. But there are only 6 strings.

The string on the guitar at the top of the neck has the same sound as the first string at the bottom three octaves apart. Therefore, both the first and sixth are, as it were, dominant, but only in relation to a 6-string instrument (the main tuning is in E minor).

Mi-si-sol-re-la-mi: is the sequence in tuning correct?

Quite often, many beginning guitarists trying to understand the basics of the technique are immediately faced with the problem of tuning, not knowing which string corresponds to which symbol in the designation or sound.

If you go through the search, sequentially from the sixth string to the first, it will look like “e-la-re-sol-si-mi”. And the above sequence is reverse.

Such a sequence is not suitable for a flat sequence, since it should look like “si-mi-la-re-sol-do-fa”. However, we digress from the topic.

Fundamental tone and tuning

The name of the strings, as is already clear, is standard for any instrument. As for the (6-string) this is done quite simply.

There are several ways in which a beginning musician can use the unison of an open string lower on the neck with one that is clamped at the fifth fret above. All strings, except the third, are built according to this rule. You can use the harmonic effect on different frets (the strings vibrate among themselves) or turn on a distortion effect, which will add drive and increase vibration. That is, the strings will have to be retuned until the sound matches completely. Professional electric guitars have a special micro-tuning device on the soundboard for this purpose).

Basic chords for beginners

For many beginning guitarists, the note “A” is usually associated with the chord, which is the second simplest chord in guitar technique.

It consists of only three fingers: two on the second fret (fourth and third string) and one on the second string on the first fret. The note “A” in this case acts as a tonic.

But the simplest chord is still the E minor chord. There are only two strings - the fifth and fourth on the second fret. A major chord played from “E” involves holding the third string on the second fret, and a major chord with the tonic “A” is even simpler - three fingers on the second fret (second, third and fourth string).

Barre technique

Although the name of the strings on a guitar no longer causes misunderstanding, it is especially worth noting a technique called barre (clamping index finger all right).

Any standard chord can be built using this technique. In fact, the same simple applications indicated above can be applied to this case, but only the nut near the tuning mechanism on the headstock acts as a barre.

Varieties of playing techniques

The name of the strings on a guitar is often emphasized with certain symbols, although it is not directly advertised. For example, in the standard version the third, fifth, seventh and twelfth frets are designated (sometimes the ninth). For many famous guitarists you can find all sorts of signs, including skulls or something else. These guitars are made to order.

And playing any instrument is quite difficult, be it fingerpicking, strumming, tapping, sliding, etc. With the advent of “gadgets,” technology has reached new level. That alone is worth it... And modern guitarists generally demonstrate such miracles of technology that it simply boggles the mind.

The same Steve Vai, Marty Friedmann or Kirk Hammett are the only ones of our time. And by the way, even though they know classical school, do not always use it in their improvisations. For example, Friedman tends to play in fifths, or nine notes per pass. And everyone's technique is different. But if you set a goal, nothing is impossible. Maybe the modern reader will become a great guitarist in the future, who knows?

Non-classical settings are used for the convenience of playing certain musical genres or pieces of music.

Classic setting method

1. tuning fork
2. The 1st string is used to tune the 2nd string, which, being pressed at the V fret, should sound the same as the 1st open (not pressed) string.
3. The 3rd string, pressed at the 4th fret, is tuned to the 2nd open string.
4. The 4th string, pressed on the V fret, is tuned to the 3rd open string.
5. The 5th string, pressed at the V fret, is tuned to the 4th open string.
6. The 6th string, pressed at the V fret, is tuned to the 5th open string.

Tuning with harmonics and temperament

Allows for much more precise tuning, since the accuracy of the frets is not always sufficient.

1. The 1st string is tuned using the reference sound - the sound of a tuning fork - or the sound of an already tuned musical instrument.
2. The 6th string is tuned so that its harmonic at the 5th fret sounds in unison with the 1st string.
3. The 5th string is tuned so that its harmonic at the 7th fret sounds in unison with the 1st string, and then it is slightly pulled up so that a beat occurs with a frequency of 0.372 Hz (one beat in 2.7 seconds).
4. The 4th string is tuned so that its harmonic at the 7th fret sounds in unison with the harmonic of the 5th string at the 5th fret, and then slightly tightened so that a beat occurs with a frequency of 0.497 Hz (one beat per 2.01 seconds).
5. The 3rd string is tuned so that its harmonic at the 7th fret sounds in unison with the harmonic of the 4th string at the 5th fret, and then slightly tightened so that a beat occurs with a frequency of 0.664 Hz (one beat per 1.51 seconds).
6. The 2nd string is tuned so that its harmonic on the 5th fret sounds almost in unison with the harmonic of the 1st string on the 7th fret, but is slightly shortened so that a beat with a frequency of 1.12 Hz is heard (one beat per 0.9 seconds).

When tuning using the tuning fork A (“A”), the 5th string is tuned first (the harmonic on the V fret in unison with the tuning fork), then the 1st and 6th, and then the 4th, 3rd and 2nd.

With good hearing, and having accumulated sufficient experience, you can do without using harmonics, catching the beat of overtones in the sound of open strings.

Since changing the string tension leads to deformation of the guitar body and detuning of the remaining strings, it is recommended to tune the guitar in 2-3 iterations, the first of which can be done without temperament (without carefully calculating the beat frequency).

Lower tunings of a six-string guitar

Decreased (i.e. lower than the normal EBGDAE tuning) tunings are used for more comfortable playing a certain key, or to obtain a lower, “heavy” sound. In particular, many rock guitarists love the so-called. Drop tunings, which are named by adding to “Drop” a note on the 6th string that drops 1 tone below the first (for example: Drop C = DAFCGC). To rebuild from classical system in any lowered mode, all the strings of the guitar are lowered by a certain interval (for example, to change to tuning D, you need to lower all the strings of the guitar by a tone). To lower the guitar's tuning by more than a tone, you may need to change the strings to thicker ones due to the weakening of their tension. Also, for tunings below B (B), mostly baritone guitars are used.

String	Scale E♭ (E-flat)		Build D (re)		Scale D♭ (D-flat)		Build C (before)		System B (si)
	Note	Frequency (in hertz)	Note	Frequency	Note	Frequency	Note	Frequency	Note	Frequency
First	e♭¹ (E-flat first octave)	311.13	d¹ (D first octave)	293.66	d♭¹ (D-flat first octave)	277.18	c¹ (to the first octave)	261.63	b (B small octave)	246.94
Second	b♭ (B-flat small octave)	233.08	a (A small octave)	220.00	a♭ (A-flat small octave)	207.00	g (small octave sol)	196.00	g♭ (G-flat small octave)	185.00
Third	g♭ (G-flat small octave)	185.00	f (f small octave)	174.62	e (minor octave E)	164.81	e♭ (small octave E-flat)	155.56	d (small octave D)	147.83
Fourth	d♭ (D-flat small octave)	138.59	c (to small octave)	130.82	B (big octave B)	123.48	B♭ (B-flat major octave)	116.54	A (A major octave)	110.00
Fifth	A♭ (A-flat major octave)	103.80	G (major octave G)	98.00	G♭ (G flat major octave)	92.50	F (major octave F)	87.31	E (major octave E)	82.41
Sixth	E♭ (major octave E-flat)	77.78	D (major octave D)	73.91	D♭ (D-flat major octave)	69.30	C (to major octave)	65.41	B¹ (B counter octave)	61.74
Notes

Open C

One of characteristic features is the ease of extracting basic major chords. A simple barre at the 2nd fret will give "D", 4th will give "E", 5th will give "F" and so on. Open strings will give you "C".

In order to tune a guitar in “Open C”, you need (starting from the “standard tuning”): 1st string (thin) Leave as in the “standard tuning” - “E” (“E”)
2nd string. Raise half a step to “C” (“C”)
3rd string. Leave as in “standard tuning” - “Salt” (“G”)
4th string. Lower one step to “Before” (“C”)
5th string. Lower one step to “Salt” (“G”)
6th string (thick). Lower by two steps from “E” to “Do” (“C”)

Raised tunings of a six-string guitar

Tuning a guitar, especially a classical one, can damage the instrument., as well as to injuries due to a sudden break of a tightened string.

To increase the tuning, you can use a capo. If rebuilding your guitar is necessary, it is recommended to use a thinner set of strings.

String	Build F (fa)		Tuning F# (F-sharp)		Tuning G (sol)		G# scale (G sharp)		System A (la)
	Note	Frequency (in hertz)	Note	Frequency	Note	Frequency	Note	Frequency	Note	Frequency
First	f¹ (fa first octave)	349.23	f¹# (F-sharp first octave)	369.99	g¹ (sol of the first octave)	392.00	g¹# (G-sharp first octave)	415.30	a¹ (A first octave)	440.00
Second	с¹ (to the first octave)	261.63	с¹# (C-sharp of the first octave)	277.18	d¹ (D first octave)	293.66	D¹# (D-sharp first octave)	311.13	e¹ (E first octave)	311.13
Third	g# (G-sharp small octave)	207.00	a (A small octave)	220.00	a# (A-sharp small octave)	233.08	b (B small octave)	246.94	c¹ (to the first octave)	261.63
Fourth	d# (d-sharp small octave)	155.56	e (minor octave E)	164.81	f (f small octave)	174.62	f# (F-sharp small octave)	185.00	g (small octave sol)	196.00
Fifth	A# (A-sharp major octave)	116.54	B (big octave B)	123.48	c (to small octave)	130.82	c# (C-sharp small octave)	138.59	d (small octave D)	147.83
Sixth	F (major octave F)	87.31	F# (F-sharp major octave)	92.50	G (major octave G)	98.00	G# (G-sharp major octave)	103.80	A (A major octave)	110.00
Notes

"Drop D" formation

This tuning differs from the classical one in that it is lowered by tone sixth string. It is often used by hard rock electric guitarists because it makes it easier to play 5th chords. power-chord), also some works were written for him classical guitar(in the keys of D major and D minor).

"Drop C" formation

Used to produce an even lower and “heavier” sound on an electric guitar. Unlike the classical system, all strings except the sixth tune in to tone below and sixth string- on two tones.
Like Drop tuning D is used to play fifth chords.

Double Drop-D formation

The tuning is similar to Drop D, differing in that the first string is lowered a tone. For tuning from classical tuning first And sixth the string is lowered to tone.
In this tuning, the top four open strings of the guitar form a G major chord, making it easier to play with slide. Double drop D was often used by performer Neil Young.

Build "DADGAD"

The tuning most often used in folk music. It was invented by British guitarist David Graham for more convenient playing from notes recorded for violin or bagpipes.
To reorganize the “DADGAD” system from the classic one, it is necessary to lower it to tone first, second And sixth strings.

Build "DADDAD"

The “Papa-Papa” tuning is most suitable both for use in folk music (Celtic) and for playing rhythm guitar parts in “heavy” (alternative) music, 4 notes at a time. To change the tuning “DADDAD” from the classical one, you need to lower it to tone first, second And sixth strings. A third tune in unison with fourth.

Build "Open D"

In this tuning, the open strings form a D major chord. It is used primarily on slide guitars.
To rebuild into this system from the classical first, second And sixth strings drop to tone, third goes down to semitone.

"Open G" build

In this tuning, the open strings form a G major chord.
To change to "Open G" tuning from the classic first, fifth And sixth strings drop to tone.

"New Standard"

Also known as "Crafty tuning". A tuning developed by musician Robert Fripp and used by him since 1983. In contrast to the classical “quart” tuning, the tuning proposed by Robert Fripp is closer to bowed string instruments, and first, second And third the strings are tuned similarly to a violin. Tuning to this tuning may require replacing the lower strings with thicker ones and the upper strings with thinner ones.

"Alternative tuning Cross A"

E-A-E-A-E-A. "Sitar A" is an alternative lowered guitar tuning. Reminds me of the sound of an Indian sitar. Great for creating Indian (oriental) music.

Seven-string tunings

Standard

The structure of the strings of a seven-string guitar is mixed - terts-quart, so the chord of the open strings is consonant (major quartet-sixth chord), in contrast to six string guitar. This system is considered classical (academic).

And he even posted it, albeit in English.
In general, today I decided to touch upon this topic again and consider the most common of them.

It wouldn't hurt to remind you of simple things. If you decide to tune lower, then it is better to take a thicker one, otherwise in some Dropped the usual nine will just dangle and ring on the frets. If you decide to make the tuning of your guitar higher, then in this case you can take thinner strings, because Large gauge strings, in this case, can be very tight. Well, no one has canceled the excess load on the bar either.

Also, if there is a radical change in the system, be prepared to do it again, although you may not have to do this.

So, let's go.

Standard tuning: E-A-D-g-b-e

In standard guitar tuning All the intervals between the strings are perfect fourths (five semitones), with the exception of the interval between the third string (g) and the second string (b), which is a major third (four semitones).

Down a semitone: Eb-Ab-Db-gb-bb-eb

This guitar tuning is also called "Eb" - based on the note to which the thickest string is tuned. Tuning the guitar is exactly the same as in standard tuning. The sound intervals between the strings remain exactly the same, but each string is tuned exactly one semitone lower than the standard tuning. Eb tuning can be used for many reasons, such as making the strings softer and bending easier, or to better suit a singer's vocal range. There can be many reasons. This tuning was used by Jimi Hendrix and Stevie Ray Vaughan.

Down a whole tone: D-G-C-f-a-d

This tuning is also called “Tuning D” - based on the note to which the thickest string is tuned. Everything is the same as in the previous case, except that each string is tuned a tone lower than the standard tuning. This tuning is used for the same reasons as "E?", it causes the strings to sag even more and makes bending even easier. At this point I would think about using thicker gauge strings.
If this is not enough for you, then you can continue further. Those. lower or lower each string at an equal interval relative to the standard tuning. The algorithm is simple, the main thing is to choose the appropriate size strings.

Drop-D: D-A-d-g-b-e

Drop-D is probably one of the most popular tunings in hard rock, alternative and other motherfuckers. By the way, folk guitarists do not disdain them either. Although they are generally big fans of alternative and non-standard guitar tunings.
By lowering the low E string one step to D, we can make power chords easier to play. Now they can be played with one finger, simply by plucking three thick strings, the 4th, 5th and 6th, respectively. Drop-D build gives a meatier sound and expands the overall range of the guitar towards the bottom relative to the standard tuning.
By the way, this system does not require a large and lengthy restructuring, which allows you to change the system right on the fly, with the proper skill, of course.
To facilitate this procedure, a special device was even invented and made - the D Tuner, which will allow you to literally rebuild the sixth string in a second.

Double Drop-D: D-A-d-g-b-d

Double drop D is Neil Young's favorite tuning. It is identical to the regular Drop-D, except that the high e is also lowered one tone from the standard tuning - to d. With this setup, it turns out that the 4th high strings form a G major chord, and this can be convenient when playing with a slide. This tuning is also quite quick and easy to get from the standard one.

Drop-C: C-G-c-f-a-d

This tuning will help make your guitar sound lower and meatier when overdriven. This tuning is achieved by first tuning the guitar a tone lower than standard, and then lowering the 6th string another tone.
Quite low, don't you think? With this tuning, thicker strings are clearly needed. Thin ones will obviously hang around like snot.
In general, the technique is simple. We already understand what Drop is. But whether to lower it by one tone, 2 or more - that’s up to you. Everything will depend on the gauge of the strings and your desire.

Tuning D5: D-A-d-d-d-d

This system is classified as open formations, because If all the strings are open, the chord D5 sounds. This tuning is quite often used when playing slide. To get this tuning you need to lower the 3rd string by 5 semitones, raise the 2nd string by 3 semitones and lower the 1st string by a tone.
There are variations of this tuning in which the 3rd string is raised to A instead of lowered to D. This gives two fifths of a step in different octaves, which gives the sound some depth.

Ostrich formation: D-D-d-d-d-d

In this tuning, all strings are tuned to the same note. Lou Reed is said to have invented this tuning while he was with the Velvet Underground. Important note: With this tuning, you will definitely need to build your own set of strings.

I guess I'll stop for today. This, of course, is all alternative and non-standard guitar tunings are not exhausted.
I think I’ll throw in a dozen more soon.