What tone does each string on a guitar represent? Classification of guitar tunings. Standard tuning: E-A-D-g-b-e

Many guitarists wonder which strings are best suited to their tuning. When choosing, it is worth remembering that preferences for tension and string diameter are a very individual thing. It is for this reason that you should not take the information from this material as an absolute truth: we will provide the most generalized and averaged data, according to which you can choose the optimal thickness of the set to suit your preferences.

For ease of reading the article, we will use whole string thickness designations (for example, 9-42 instead of 0.009-0.042).

Factors influencing the choice of string thickness

• Guitar scale: the longer it is, the tighter the strings will be, all other things being equal. In the table below we will be using the standard 25.5" scale. If you have a guitar with a smaller scale, then you will need to make a slight adjustment and go with a thicker set.
• String tension: the greater their tension, the thicker the strings - accordingly, they have a more powerful and voluminous sound. However, on the other hand, thicker strings have a smaller vibration amplitude, which is why their sound is not as rich in overtones, it is duller and flatter - this is especially audible on thin strings without winding.
• Third string: in most sets this is not wound (plain). In sets with a first string thickness of 12 or more, the third string is usually wrapped. IN in this case It is worth considering that the braid increases the tension - you will have to forget about bending by one and a half to two tones, although, on the other hand, in lower tunings the third string of the wound sounds much fuller and richer.
• Today you can buy guitar strings in balanced sets (8-38, 9-42, 10-46, 11-50, 12-54, 13-56, etc.) and unbalanced(9-46, 10-52, 11-52, 12-56/60, etc.)

The former are usually used for standard tuning or tuning lowered across all strings by an equal number of semitones. The second type is ideal for lovers of drop tunings (the 6th string is lowered by whole tone), as well as for those who use hybrid and open settings guitars.

• The thickest sets of strings (12-60, 13-72, etc.) are best suited for long-scale guitars - baritones. They have a scale length of 26 inches or more, and are used in very low tunings (for example, Standard A and lower).

In principle, such kits can also be used for instruments with a standard scale for deeply lowered action, however, before purchasing, you should consider a couple of nuances:

• You may simply not have enough scale adjustment options on the bridge, since low pitch requires its reconfiguration. In this case, either replacing the bridge or switching to a thinner set will help.
• If you use a thicker set, you will either bore out the string grooves on the nut or simply won't be able to fit the strings into them. When going back to more thin strings, they will hang around in the bored grooves, making it difficult to fine-tune the guitar.

In addition, thick strings may not fit into the peg - it will also have to be bored.

Which strings are suitable for a particular tuning?

Helpful Tip: If you want to tune your guitar to B Standard or lower, consider buying a baritone or 7- string guitar- you need to understand that not all types of 6-string electric guitars are intended for experiments with strong lowering of the tuning.

Let us repeat that these recommendations are conditional and partly subjective. Suffice it to remember the great SRV, which used the 13-56 kit for the Standard Eb build: therefore, the most important thing is your feelings. Try several different sets, experiment - and you will certainly find the optimal set for your music!

Based on materials from an article by Egor Kalgannikov, 12.2013.

In the previous article, the issue of lowered order guitars. In this article I would like to discuss it in more detail.
Let me remind you that the standard tuning of a six-string electric guitar is: E[E]-A[A]-De[D]-G[G]-B[H]-E[E], starting from the sixth string. Let's look at the prerequisites for switching to a different guitar tuning. Down tuning is used in extreme music to create a tighter, heavier and more powerful sound. You can also give an example of when musicians playing in rock bands decide to use a lower tuning to make it easier for the vocalist to sing. That is, they adapt to a certain person and a certain style of music. By the way, you can also raise the tuning of the guitar, adapting to the singer’s vocal abilities. Also, the use of a low guitar tuning is due to a different chord fingering. That is, the tuning of the guitar is selected for the convenience of playing chords.

When using a lower tuning electric guitar, the string tension will naturally decrease and thin strings may simply hang. Therefore, you need to select thicker sets of strings.
I can say that there are quite a lot of options for tuning a guitar. We'll look at a few common ones. Using their examples, you can choose the optimal system for yourself or come up with your own.

1. Lower by half a tone. In this case, the system becomes as follows: Re#-Sol#-Do#-Fa#-Aa#-Re#.
2. Lower by tone. Guitar tuning: D[D]-G[G]-Do[C]-F[F]-A[A]-D[D].
3. A formation called "Drop D". In this case, only the sixth string is lowered by tone: Re[D]-A[A]-Re[D]-Sol[G]-Bi[H]-Mi[E]. In this case, there is a fifth between the sixth and fifth strings and you can play various riffs by pressing these two strings with one finger.

Guitar tuning: Drop D

4. Build called "Drop C". The sixth string is lowered by two tones. The remaining strings are one tone. Then the guitar tuning looks like this: Do[C]-G[G]-Do[C]-Fa[F]-A[A]-D[D]. The tuning is lower than described above, but similarly you can play chords on two low strings with one finger.

Guitar Tuning: Drop C

5. And in conclusion, let's look at one more system. I remember him from the song Kashmir by Led Zeppelin. It looks like this: Re[D]-A[A]-Re[D]-Sol[G]-A[A]-Re[D].

Led Zeppelin

In this article I want to clarify a little guitar tunings. What are they, why were they formed this way, and how to generally tune your guitar. Firstly, a little educational information. The order is indicated by letters. The letters are the notes that produce the open strings from the sixth (thickest) to the first (thinnest). Let's start with, so to speak, the standard - this standard guitar tuning.

Standard tuning E A D G B E (E)

In this tuning, the guitar is tuned in fourths, i.e. the interval between each string is a fourth. Read what it is. The exception is the second and third strings, the interval between which is a major third. They say in the jargon that the guitar is tuned in "E", i.e. these are the notes on the first and sixth strings. By tuning your guitar in this tuning, you can easily play regular full chords, major and minor. And in general, it seems to me that 90% of all songs can be played in it.

Low tuning Eb Ab Db Gb Bb Eb (E flat)

If all the strings are tuned to standard tuning and lowered each half a step, we get a lower tuning of E flat. The spacing between the strings is the same as in standard E tuning. What is this system used for? Mainly to make it easier for the vocalist to sing or for a lower and heavier sound (for example in heavy metal and other rock music).

Low tuning D G C F A D (D)

If in the standard tuning all the strings are lowered even lower - by 2 semitones, then we will get the D tuning. Here also the intervals are preserved. Essentially all lower tunings of this type are just standard tunings with a lower tuning. Used again for a heavier and lower sound, for example in heavy metal. The standard can be lowered further and get, for example, C (to). The meaning will be the same.

Dropped D: D A D G B E

Now this is more interesting. Take the E standard and lower the 6th string a whole tone. Now we have 2 D notes on open strings. Fifths on the sixth string are pressed not with 2 fingers, as in the standard one, but with one. This is probably the most popular tuning in alternative metal. Gives a meatier sound and expands the guitar's range. Well, convenience appears when playing fifths (power chords).

Dropped C: C G C F A D

Everything is the same as in the case of Drop D, only we take the lowered tuning of D as a basis and also lower the sixth string an additional tone. The favorite tuning of all metalcore players.

So, by equivalently lowering the strings, you can tune the guitar even higher or lower. That is, in fact, all these tunings above are variations of 2 tunings: standard and drop. They are probably the most popular among guitarists. Using just them, you can play 99% of all the songs in the world with ease. In addition to them, there are also a lot of non-standard tunings, but they are quite rarely used. And in general, you yourself can even come up with your own guitar tuning and figure out how to play it =)

If you have already decided to start playing the guitar, then the first thing you need to do when you pick up the instrument is to tune the guitar. About how it is carried out 6 string guitar tuning and this article tells the story. Let's look at how to tune a guitar with and without a tuner. Never play an out of tune guitar - it will completely damage your hearing!

Standard guitar tuning

Tuning a guitar requires each string to sound a specific note. The set of notes of all strings is called the tuning of a guitar. Tuning a 6 string guitar can be done in different tunings, but we will focus on the most common one - classical system which is more often called standard formation guitars.

In short, any tuning is written as a sequence of notes of the open strings from the first to the sixth. Standard tuning is written like this:

E B G D A E

What does it mean in Russian:

Mi Si Sol Re La Mi

As you can see, the first and sixth strings sound the note Mi , but in the case of the sixth string it is Mi second octave (thick string), and the first string produces Mi fourth octave (thin). There will be more about this a little later.

Guitar tuner

In the age of technology, it would be strange if there was no gadget for tuning a guitar. But it exists and there are just a lot of options. Not only is this a very convenient thing, it is also very cheap.

This is a small clothespin that attaches to the headstock, i.e. to the place where the pegs are on the guitar. The clothespin contains a sensor that detects sound vibrations going about t strings Thanks to this, the tuner does not pick up external noise.

We will look at what these strange letters on the screen are, but for now I want to please you. The cost of this miracle on AliExpress only 3$. In music stores, such tuners are sold many times more expensive. I recommend purchasing it if necessary. It will come in handy, I use this myself. It's better to buy in this store .

Tuner for tuning a guitar on your phone

Today there is more than one online service for tuning a guitar. There are also enough programs for PC, for example the same Guitar Pro allows you to do this. But it is much more convenient to install the application on your smartphone and not depend on the Internet and/or computer.

There are tons of guitar tuning apps for smartphones. But the most complete and advanced among them all was and remains to this day the gStrings guitar tuner. I've been using it for 5 years now.

You can download it from Google Play Market ‘ A.

After all the changes made by the developers, the application has become maximally adapted to living conditions. You just need to take your phone out of your pocket, open the app and start plucking strings, not necessarily guitar strings. The application is omnivorous and is great for tuning a guitar, as well as for tuning a bass guitar, violin and any other instrument. Even the drums were once pulled up on it.

At the top of the tuner screen are consecutive notes. In the center is a tuned note, and an arrow indicates what to do with this note. If the arrow is to the left of the center of the screen, it means the note is not played. If it’s to the right, it’s overtightened.

A note is considered tuned if the arrow points to the center, i.e. on the note itself, while its color changes, in this case from gray to white. Today, all tuners have a similar intuitive interface.

As already shown above, notes are indicated by the first letters of the English alphabet. The letters go as in the English alphabet, in order, but starting with the note A:

• Do - C
• D - D
• Mi - E
• Fa - F
• Salt G
• A - A
• C - B

When talking about standard tuning, octaves were mentioned. Which octave a note belongs to is indicated in the program by a number next to the note. Under the note, its frequency is indicated in Hertz (Hz). The center of the screen shows the sound frequency in at the moment. For standard tuning this is:

• 1 string — E 4 — 329.63 Hz
• 2nd string — B 3 — 246.94 Hz
• 3rd string — G 3 — 196.00 Hz
• 4th string — D 3 — 146.83 Hz
• 5 string — A 2 —110.00Hz
• 6th string — E 2 — 82.41 Hz

Don't get confused! otherwise in best case scenario You'll break the string, or at worst, you'll damage the guitar.

Tuning a 6 string guitar by notes

Today, given that everyone has a smartphone or two in their pocket, this option for tuning a guitar can be considered outdated, but you shouldn’t write it off. One way or another, everyone who plans to continue playing the guitar should know it. You never know, suddenly the battery on your smartphone runs out)

The method is based on the fact that each subsequent string is tuned to the previous one by ear, by resonance. As we already know, the open first string produces the note Mi. If we hold down the second string at the fifth fret, we will also get the same note Mi and a resonance will arise between them, i.e. they will begin to enhance each other's sound.

This means that in order to tune the second string, it needs to sound the same as the open first string at the fifth fret. Therefore, we clamp the second string at the fifth fret, pluck the first string, and then the second, and try to determine whether the second string sounds higher or lower.

At the same time, to make it easier to determine whether the second string is understretched or overtightened, you can move from the fifth fret to other frets and look for which fret the resonance will occur on. If it occurs on higher frets (6,7,8...) then the second string should be tightened even more. If resonance occurs if you hold the second string at lower frets (1-4), then the second string is overtightened.

Guitar beats and tuning

When you come very close to the desired note and the difference between the notes is very close, so-called beats occur. Beating is the result of a slight difference between two close frequencies that are trying to resonate, but because of the slight difference, the sound is either strengthened or weakened. Graphically it looks like this:

When setting acoustic guitar, the beats are not only perceptible by ear, but also clearly felt by the body when touching the soundboard (body) of the guitar. This is especially noticeable on the upper bass strings, due to their thickness and lower sound frequency.

The closer the sounds of two notes correspond to each other (the second string on the fifth fret and the open first), the faster the beats will occur. And when the notes coincide, the beats will stop altogether. You just have to feel it and then you can adjust it without thinking.

By analogy for the other strings. The third string should sound the same as the second open string when plucked at the fourth fret. To tune the 4th, 5th and 6th strings, you should clamp them at the fifth fret and compare their sound with the sound of the previous string.

It turns out that all strings except the third are tuned according to the resonance between them at the fifth fret and the previous string, and the third string is similar, but is clamped at the fourth fret.

Sheet music for guitar tuning

In this way, you can tune the guitar in reverse order or starting from any string, but there is one thing in this method weak point. Initially, one of the strings must be tuned from outside. The tuning fork was invented for these purposes. A standard tuning fork produces an A note with a frequency of 440 Hz. Those. This is the first string on the fifth fret.

Especially for you, a 20-second file with the note A (440Hz) produced by a standard tuning fork was created in the Audacity audio editor. Well, at the same time, 20 seconds of the sound of the first string.

Download or listen online sheet music for guitar tuning:

You can create the sound of any note yourself in Audacity. How to do this, read the article:

Another instrument, such as a piano or a second guitar, can also serve as a reference. But it’s better to memorize some melody for yourself, preferably using all the strings separately, by playing which you could accurately determine whether the instrument is out of tune and which strings should be tuned.

For me personally, such a melody is the introduction of Viktor Tsoi’s song “Aluminum Cucumbers.” If you develop auditory memory and remember the sound of notes, then you can tune a guitar without a tuning fork, and even more so without tuners, without any problems. It just takes practice and regular play.

And finally, a video showing another guitar tuning option:

The article was written exclusively for the site

The guitar is one of the most famous and at the same time unpredictable instruments that can touch the most sensual strings of the soul. But the guitar itself also has them.

Few people pay attention to the name of the strings on a guitar, considering it completely unnecessary. But often the performance of any composition depends on the setting. Any dissonance causes associative rejection of the composition as a whole. But in this material The focus will be on instrument tuning and use for beginning musicians.

Guitar string name: classic version

In general, it is considered a classic. However, one can recall quite a lot of examples of great composers who preferred seven strings to six (at least Vysotsky).

However, according to music theory and solfeggio, the names of the strings do not differ at all. Based on the rules established general theory music, the notes on which any instrument is built have their own names and abbreviations in the form of Latin symbols and language interpretations. In our case it is:

• C - to.
• D - re.
• E - mi.
• F - fa.
• G - salt.
• A - la.
• H - B (B - B-flat is indicated separately).

(sharps, flats, bekars or their double versions) are applied accordingly. But there are only 6 strings.

The string on the guitar at the top of the neck has the same sound as the first string at the bottom three octaves apart. Therefore, both the first and sixth are, as it were, dominant, but only in relation to a 6-string instrument (the main tuning is in E minor).

Mi-si-sol-re-la-mi: is the sequence in tuning correct?

Quite often, many beginning guitarists trying to understand the basics of the technique are immediately faced with the problem of tuning, not knowing which string corresponds to which symbol in the designation or sound.

If you go through the search, sequentially from the sixth string to the first, it will look like “e-la-re-sol-si-mi”. And the above sequence is reverse.

Such a sequence is not suitable for a flat sequence, since it should look like “si-mi-la-re-sol-do-fa”. However, we digress from the topic.

Fundamental tone and tuning

The name of the strings, as is already clear, is standard for any instrument. As for the (6-string) this is done quite simply.

There are several ways in which unison is suitable for a beginning musician. open string lower on the neck, with the one clamped at the fifth fret above. All strings, except the third, are built according to this rule. You can use the harmonic effect on different frets (the strings vibrate among themselves) or turn on a distortion effect, which will add drive and increase vibration. That is, the strings will have to be retuned until the sound matches completely. Professional electric guitars have a special micro-tuning device on the soundboard for this purpose).

Basic chords for beginners

Many beginning guitarists tend to associate the note “A” with the chord, which is the second simplest chord in guitar technique.

It consists of only three fingers: two on the second fret (fourth and third string) and one on the second string on the first fret. The note “A” in this case acts as a tonic.

But the simplest chord is still the E minor chord. There are only two strings - the fifth and fourth on the second fret. A major chord played from “E” involves holding the third string on the second fret, and a major chord with the tonic “A” is even simpler - three fingers on the second fret (second, third and fourth string).

Barre technique

Although the name of the strings on a guitar no longer causes misunderstanding, it is especially worth noting a technique called barre (clamping index finger all right).

Any standard chord can be built using this technique. In fact, the same simple applications indicated above can be applied to this case, but only the nut near the tuning mechanism on the headstock acts as a barre.

Varieties of playing techniques

The name of the strings on a guitar is often emphasized with certain symbols, although it is not directly advertised. For example, in the standard version the third, fifth, seventh and twelfth frets are designated (sometimes the ninth). For many famous guitarists you can find all sorts of signs, including skulls or something else. These guitars are made to order.

And playing any instrument is quite difficult, be it fingerpicking, strumming, tapping, sliding, etc. With the advent of “gadgets,” technology has reached new level. That alone is worth it... And modern guitarists generally demonstrate such miracles of technology that it simply boggles the mind.

The same Steve Vai, Marty Friedmann or Kirk Hammett are the only ones of our time. And by the way, even though they know classical school, do not always use it in their improvisations. For example, Friedman tends to play in fifths, or nine notes per pass. And everyone's technique is different. But if you set a goal, nothing is impossible. Maybe the modern reader will become a great guitarist in the future, who knows?