Build e. Names of guitar strings. EADGBE - classic tuning

If you have already decided to start playing the guitar, then the first thing you need to do when you pick up the instrument is to tune the guitar. About how it is carried out setting 6 string guitar and this article tells the story. Let's look at how to tune a guitar with and without a tuner. Never play an out of tune guitar - it will completely damage your hearing!

Standard guitar tuning

Tuning a guitar requires each string to sound a specific note. The set of notes of all strings is called the tuning of a guitar. Tuning a 6 string guitar can be done in different tunings, but we will focus on the most common one - classical system, which is more often called standard guitar tuning.

In short, any tuning is written as a sequence of notes of the open strings from the first to the sixth. The standard tuning is written like this:

E B G D A E

What does it mean in Russian:

Mi Si Sol Re La Mi

As you can see, the first and sixth strings sound the note Mi , but in the case of the sixth string it is Mi second octave (thick string), and the first string produces Mi fourth octave (thin). There will be more about this a little later.

Guitar tuner

In the age of technology, it would be strange if there was no gadget for tuning a guitar. But it exists and there are just a lot of options. Not only is this a very convenient thing, it is also very cheap.

This is a small clothespin that attaches to the headstock, i.e. to the place where the pegs are on the guitar. The clothespin contains a sensor that detects sound vibrations going about t strings Thanks to this, the tuner does not pick up external noise.

We will look at what these strange letters on the screen are, but for now I want to please you. The cost of this miracle on AliExpress only 3$. In music stores, such tuners are sold many times more expensive. I recommend purchasing it if necessary. It will come in handy, I use this myself. It's better to buy in this store .

Tuner for tuning a guitar on your phone

Today there is more than one online service for tuning a guitar. There are also enough programs for PC, for example the same Guitar Pro allows you to do this. But it is much more convenient to install the application on your smartphone and not depend on the Internet and/or computer.


There are tons of guitar tuning apps for smartphones. But the most complete and advanced among them all was and remains to this day the gStrings guitar tuner. I've been using it for 5 years now.

You can download it from Google Play Market A.

After all the changes made by the developers, the application has become maximally adapted to living conditions. You just need to take your phone out of your pocket, open the app and start plucking strings, not necessarily guitar strings. The application is omnivorous and is great for tuning a guitar, as well as for tuning a bass guitar, violin and any other instrument. Even the drums were once pulled up on it.

At the top of the tuner screen are consecutive notes. In the center is a tuned note, and an arrow indicates what to do with this note. If the arrow is to the left of the center of the screen, it means the note is not played. If it’s to the right, it’s overtightened.


A note is considered tuned if the arrow points to the center, i.e. on the note itself, while its color changes, in this case from gray to white. Today, all tuners have a similar intuitive interface.

As already shown above, notes are indicated by the first letters of the English alphabet. The letters go as in the English alphabet, in order, but starting with the note A:

  • Do - C
  • D - D
  • Mi - E
  • Fa - F
  • Salt G
  • A - A
  • C - B

When talking about standard tuning, octaves were mentioned. Which octave a note belongs to is indicated in the program by a number next to the note. Under the note, its frequency is indicated in Hertz (Hz). The center of the screen shows the sound frequency in at the moment. For standard tuning this is:

  • 1 stringE 4329.63 Hz
  • 2nd stringB 3246.94 Hz
  • 3rd stringG 3196.00 Hz
  • 4th stringD 3146.83 Hz
  • 5 stringA 2110.00Hz
  • 6th stringE 282.41 Hz

Don't get confused! otherwise in best case scenario You'll break the string, or at worst, you'll damage the guitar.


Tuning a 6 string guitar by notes

Today, given that everyone has a smartphone or two in their pocket, this option for tuning a guitar can be considered outdated, but you shouldn’t write it off. One way or another, everyone who plans to continue playing the guitar should know it. You never know, suddenly the battery on your smartphone runs out)


The method is based on the fact that each subsequent string is tuned to the previous one by ear, by resonance. As we already know, the open first string produces the note Mi. If we hold down the second string at the fifth fret, we will also get the same note Mi and a resonance will arise between them, i.e. they will begin to enhance each other's sound.

This means that in order to tune the second string, it needs to sound the same as the open first string at the fifth fret. Therefore, we clamp the second string at the fifth fret, pluck the first string, and then the second, and try to determine whether the second string sounds higher or lower.

At the same time, to make it easier to determine whether the second string is understretched or overtightened, you can move from the fifth fret to other frets and look for which fret the resonance will occur on. If it occurs on higher frets (6,7,8...) then the second string should be tightened even more. If resonance occurs if you hold the second string at lower frets (1-4), then the second string is overtightened.

Guitar beats and tuning

When you come very close to the desired note and the difference between the notes is very close, so-called beats occur. Beating is the result of a slight difference between two close frequencies that are trying to resonate, but because of the slight difference, the sound is either strengthened or weakened. Graphically it looks like this:


When setting acoustic guitar, the beats are not only perceptible by ear, but also clearly felt by the body when touching the soundboard (body) of the guitar. This is especially noticeable on the upper bass strings, due to their thickness and lower sound frequency.

The closer the sounds of two notes correspond to each other (the second string on the fifth fret and the open first), the faster the beats will occur. And when the notes match, the beats will stop altogether. You just have to feel it and then you can adjust it without thinking.

By analogy for the other strings. The third string should sound the same as the second open string when plucked at the fourth fret. To tune the 4th, 5th and 6th strings, you should clamp them at the fifth fret and compare their sound with the sound of the previous string.


It turns out that all strings except the third are tuned according to the resonance between them at the fifth fret and the previous string, and the third string is similar, but is clamped at the fourth fret.

Sheet music for guitar tuning

In this way, you can tune the guitar in reverse order or starting from any string, but there is one thing in this method weak point. Initially, one of the strings must be tuned from outside. The tuning fork was invented for these purposes. A standard tuning fork produces an A note with a frequency of 440 Hz. Those. This is the first string on the fifth fret.


Especially for you, a 20-second file with the note A (440Hz) produced by a standard tuning fork was created in the Audacity audio editor. Well, at the same time, 20 seconds of the sound of the first string.

Download or listen online sheet music for guitar tuning:


You can create the sound of any note yourself in Audacity. How to do this, read the article:

Another instrument, such as a piano or a second guitar, can serve as a reference. But it’s better to memorize some melody for yourself, preferably using all the strings separately, by playing which you could accurately determine whether the instrument is out of tune and which strings should be tuned.

For me personally, such a melody is the introduction of Viktor Tsoi’s song “Aluminum Cucumbers.” If you develop auditory memory and remember the sound of notes, then you can tune a guitar without a tuning fork, and even more so without tuners, without any problems. It just takes practice and regular play.

And finally, a video showing another guitar tuning option:

The article was written exclusively for the site

Many guitarists wonder which strings will best suit their tuning. When choosing, it is worth remembering that preferences for tension and string diameter are a very individual thing. It is for this reason that you should not take the information from this material as an absolute truth: we will provide the most generalized and averaged data, according to which you can choose the optimal thickness of the set to suit your preferences.

For ease of reading the article, we will use whole string thickness designations (for example, 9-42 instead of 0.009-0.042).

Factors influencing the choice of string thickness

  • Guitar scale: the longer it is, the tighter the strings will be, all other things being equal. In the table below we will be using the standard 25.5" scale. If you have a guitar with a smaller scale, then you will need to make a slight adjustment and go with a thicker set.
  • String tension: The higher their tension, the thicker the strings - accordingly, they have a more powerful and voluminous sound. However, on the other hand, thicker strings have a smaller vibration amplitude, which is why their sound is not as rich in overtones, it is duller and flatter - this is especially audible on thin strings without winding.
  • Third string: in most sets this is not wound (plain). In sets with a first string thickness of 12 or more, the third string is usually wrapped. In this case, it is worth considering that the braid increases the tension - you will have to forget about bending by one and a half to two tones, although, on the other hand, in lowered tunings the third wound string sounds much fuller and richer.
  • Today you can buy guitar strings in balanced sets (8-38, 9-42, 10-46, 11-50, 12-54, 13-56, etc.) and unbalanced(9-46, 10-52, 11-52, 12-56/60, etc.)

The former are usually used for standard tuning or tuning lowered across all strings by an equal number of semitones. The second type is ideal for lovers of drop tunings (the 6th string is lowered by whole tone), as well as for those who use hybrid and open settings guitars.

  • The thickest sets of strings (12-60, 13-72, etc.) are best suited for long-scale guitars - baritones. They have a scale length of 26 inches or more, and are used in very low tunings (for example, Standard A and lower).

In principle, such kits can also be used for instruments with a standard scale for deeply lowered tuning, but before purchasing you should consider a couple of nuances:

  • You may simply not have enough scale adjustment options on the bridge, since low pitch requires its reconfiguration. In this case, either replacing the bridge or switching to a thinner set will help.
  • If you use a thicker set, you will either bore out the string grooves on the nut or simply won't be able to fit the strings into them. When switching back to thinner strings, they will hang around in the counterbore grooves, making it difficult to fine-tune the guitar.

In addition, thick strings may not fit into the peg - it will also have to be bored.

Which strings are suitable for a particular tuning?

Guitar tuning

Matching String Sets

Standard E

8-38 is a specific set that is more suitable for experienced musicians. The very small diameter allows you to make microbends simply by pressing the strings harder against the frets (this is especially effective when using a scalloped neck). From famous musicians Yngwie Malmsteen is a fan of this set

9-42 - suitable for a beginning musician, installed on all production Fender guitars

10-46 is perhaps the most popular caliber for standard tuning: the perfect balance between comfort and tone.

9.5-44 - a compromise set for lovers of dynamic sound and frequent bends

11-50 - a favorite set of musicians performing blues and light rock: allows you to swing the guitar wood to full power

12-54 - suitable, for example, for guitars with voids inside the soundboard when playing jazz and blues. High tension

9-46 - similar to the classic 9-42 set for drop tuning

10-52 - analogue of the 10-46 set for drop tuning

10-50 is not a very popular set, which, according to many musicians, is more balanced for drops and more pleasant to play than 10-52

10-60 - an unbalanced kit for those who play heavy music, this kit is used by Zakk Wylde

11-54 - bright and powerful sound when playing harmonic parts on low strings

11-56 - the most spacious and deep sound, suitable for musicians with strong fingers

Standard D

10-46 - light bends, tension below average. For singing lead parts

11-50 - perfectly balanced tension

12-54 - above average tension: every bluesman's dream

13-56 - strong tension, deep and powerful tone

10-60 is a good choice for this tuning: 1-3 strings stretch well, low strings sound monolithic and deep

11-52 - minimum thickness for this tuning, tension below average

11-54 - classic set for drop C

11-56 - enhanced sound of low strings, the difference is not always noticeable

12-54 - thicker high strings, more suitable for playing harmonic parts

12-60 - strong tension, good choice for heavy music with minimum quantity lead party

Standard A

14-68 - medium tension, excellent balance

Helpful tip: If you want to tune your guitar to B Standard or lower, consider buying a baritone or 7-string guitar - you need to understand that not all types of 6-string electric guitars are designed for experimenting with strong detuning.

Let us repeat that these recommendations are conditional and partly subjective. Suffice it to remember the great SRV, which used the 13-56 kit for the Standard Eb build: therefore, the most important thing is your feelings. Try several different sets, experiment - and you will certainly find the optimal set for your music!

Based on materials from an article by Egor Kalgannikov, 12.2013.

And he even posted it, albeit in English.
In general, today I decided to touch upon this topic again and consider the most common of them.


It wouldn’t hurt to remind you of simple things. If you decide to tune lower, then it is better to take a thicker one, otherwise in some Dropped the usual nine will just dangle and ring on the frets. If you decide to make the tuning of your guitar higher, then in this case you can take thinner strings, because Large gauge strings, in this case, can be very tight. Well, no one has canceled the excess load on the bar either.

Also, if there is a radical change in the system, be prepared to do it again, although you may not have to do this.

So, let's go.

Standard tuning: E-A-D-g-b-e

In standard guitar tuning All the intervals between the strings are perfect fourths (five semitones), with the exception of the interval between the third string (g) and the second string (b), which is a major third (four semitones).

Down a semitone: Eb-Ab-Db-gb-bb-eb

This guitar tuning also called "Eb" - after the note to which the thickest string is tuned. Tuning the guitar is exactly the same as in standard system. The sound intervals between the strings remain exactly the same, but each string is tuned exactly one semitone lower than the standard tuning. Eb tuning can be used for many reasons, such as making the strings softer and bending easier, or to better suit a singer's vocal range. There can be many reasons. This tuning was used by Jimi Hendrix and Stevie Ray Vaughan.

Down a whole tone: D-G-C-f-a-d

This tuning is also called “Tuning D” - based on the note to which the thickest string is tuned. Everything is the same as in the previous case, except that each string is tuned a tone lower than the standard tuning. This tuning is used for the same reasons as "E?", it causes the strings to sag even more and makes bending even easier. At this point I would think about using thicker gauge strings.
If this is not enough for you, then you can continue further. Those. lower or lower each string at an equal interval relative to the standard tuning. The algorithm is simple, the main thing is to choose the appropriate size strings.

Drop-D: D-A-d-g-b-e

Drop-D is probably one of the most popular tunings in hard rock, alternative and other motherfuckers. By the way, folk guitarists do not disdain them either. Although they are, in general, big fans of alternative and non-standard guitar tunings.
By lowering the low E string one step to D, we can make power chords easier to play. Now they can be played with one finger, simply by plucking three thick strings, the 4th, 5th and 6th, respectively. Drop-D build gives a meatier sound and expands the overall range of the guitar towards the bottom relative to the standard tuning.
By the way, this system does not require a large and lengthy restructuring, which allows you to change the system right on the fly, with the proper skill, of course.
To facilitate this procedure, a special device was even invented and made - the D Tuner, which will allow you to literally rebuild the sixth string in a second.

Double Drop-D: D-A-d-g-b-d

Double drop D is Neil Young's favorite tuning. It is identical to the regular Drop-D, except that the high e is also lowered one tone from the standard tuning - to d. With this setup, it turns out that the 4th high strings form a G major chord, and this can be convenient when playing with a slide. This tuning is also quite quick and easy to get from the standard one.

Drop-C: C-G-c-f-a-d

This tuning will help make your guitar sound lower and meatier when overdriven. This tuning is achieved by first tuning the guitar a tone lower than standard, and then lowering the 6th string another tone.
Quite low, don't you think? With this tuning, thicker strings are clearly needed. Thin ones will obviously hang around like snot.
In general, the technique is simple. We already understand what Drop is. But whether to lower it by one tone, 2 or more - that’s up to you. Everything will depend on the gauge of the strings and your desire.

Tuning D5: D-A-d-d-d-d

This system is classified as open formations, because If all the strings are open, the chord D5 sounds. This tuning is quite often used when playing slide. To get this tuning you need to lower the 3rd string by 5 semitones, raise the 2nd string by 3 semitones and lower the 1st string by a tone.
There are variations of this tuning in which the 3rd string is raised to A instead of lowered to D. This gives two fifths of a step in different octaves, which gives the sound some depth.

Ostrich formation: D-D-d-d-d-d

In this tuning, all strings are tuned to the same note. Lou Reed is said to have invented this tuning while he was with the Velvet Underground. Important note: With this tuning, you will definitely need to build your own set of strings.

I guess I'll stop for today. Of course, all alternative and non-standard guitar tunings are not limited to this.
I think I’ll throw in a dozen more soon.

The guitar is one of the most famous and at the same time unpredictable instruments that can touch the most sensual strings of the soul. But the guitar itself also has them.

Few people pay attention to the name of the strings on a guitar, considering it completely unnecessary. But often the performance of any composition depends on the setting. Any dissonance causes associative rejection of the composition as a whole. But in this material The focus will be on instrument tuning and use for beginning players.

Guitar string name: classic version

In general, it is considered a classic. However, one can recall quite a lot of examples of great composers who preferred seven strings to six (at least Vysotsky).

However, according to music theory and solfeggio, the names of the strings do not differ at all. Based on the rules established general theory music, the notes on which any instrument is built have their own names and abbreviations in the form of Latin symbols and language interpretations. In our case it is:

  • C - to.
  • D - re.
  • E - mi.
  • F - fa.
  • G - salt.
  • A - la.
  • H - B (B - B-flat is indicated separately).

(sharps, flats, bekars or their double versions) are applied accordingly. But there are only 6 strings.

The string on the guitar at the top of the neck has the same sound as the first string at the bottom three octaves apart. Therefore, both the first and sixth are, as it were, dominant, but only in relation to a 6-string instrument (the main tuning is in E minor).

Mi-si-sol-re-la-mi: is the sequence in tuning correct?

Quite often, many beginning guitarists trying to understand the basics of the technique are immediately faced with the problem of tuning, not knowing which string corresponds to which symbol in the designation or sound.

If you go through the search, sequentially from the sixth string to the first, it will look like “e-la-re-sol-si-mi”. And the above sequence is reverse.

Such a sequence is not suitable for a flat sequence, since it should look like “si-mi-la-re-sol-do-fa”. However, we digress from the topic.

Fundamental tone and tuning

The name of the strings, as is already clear, is standard for any instrument. As for the (6-string) this is done quite simply.

There are several ways in which a beginning musician can use the unison of an open string lower on the neck with one that is clamped at the fifth fret above. All strings, except the third, are built according to this rule. You can use the harmonic effect on different frets (the strings vibrate among themselves) or turn on a distortion effect, which will add drive and increase vibration. That is, the strings will have to be retuned until the sound matches completely. Professional electric guitars have a special micro-tuning device on the soundboard for this purpose).

Basic chords for beginners

Many beginning guitarists tend to associate the note “A” with the chord, which is the second simplest chord in guitar technique.

It consists of only three fingers: two on the second fret (fourth and third string) and one on the second string on the first fret. The note “A” in this case acts as a tonic.

But the simplest chord is still the E minor chord. There are only two strings - the fifth and fourth on the second fret. A major chord played from “E” involves holding the third string on the second fret, and a major chord with the tonic “A” is even simpler - three fingers on the second fret (second, third and fourth string).

Barre technique

Although the name of the strings on a guitar no longer causes misunderstanding, it is especially worth noting a technique called barre (clamping index finger all right).

Any standard chord can be built using this technique. In fact, the same simple applications indicated above can be applied to this case, but only the nut near the tuning mechanism on the headstock acts as a barre.

Varieties of playing techniques

The name of the strings on a guitar is often emphasized with certain symbols, although it is not directly advertised. For example, in the standard version the third, fifth, seventh and twelfth frets are designated (sometimes the ninth). For many famous guitarists you can find all sorts of signs, including skulls or something else. These guitars are made to order.

And playing any instrument is quite difficult, be it fingerpicking, strumming, tapping, sliding, etc. With the advent of “gadgets”, technology has reached new level. That alone is worth it... And modern guitarists generally demonstrate such miracles of technology that it simply boggles the mind.

The same Steve Vai, Marty Friedmann or Kirk Hammett are the only ones of our time. And by the way, even though they know classical school, do not always use it in their improvisations. For example, Friedman tends to play in fifths, or nine notes per pass. And everyone's technique is different. But if you set a goal, nothing is impossible. Maybe the modern reader will become a great guitarist in the future, who knows?

Beginner guitarists often wonder: what tuning does this or that favorite rock band play in? How to tune a guitar so that you can comfortably play known and favorite songs? In this article I will briefly give examples of guitar tunings in rock music and their representatives (musicians, bands).

I will immediately give a list of the notations used:

  • C - note C
  • D - note D
  • E - note E
  • F - note Fa
  • G - note Sol
  • A - note A
  • B (or H) - note B
  • # - sharp - raising a note by a semitone. Half a tone on a guitar - one fret.
  • b - flat - lowering the note by a semitone.
  • The notes in the tuning tablature are arranged in order from the 1st (thin) string to the 6th (thick) string. For example, E B G D A E.

1. Standard, E (standard, Spanish or classical tuning).

The simplest and most famous guitar tuning. Tablature of the system: E B G D A E - Mi Si Sol Re La Mi. This system is used mainly by rock music luminaries, old-school musicians and adherents of light genres.

Groups and musicians who play in standard tuning:

  • AC/DC
  • Led Zeppelin
  • Metallica
  • Gun's & Roses
  • Nightwish
  • Deep Purple
  • Nirvana (semitone lower)
  • Blink 182
  • Sum 41
  • Joe Satriani
  • Carlos Santana
  • Aria, Kipelov (half a tone lower)
  • Nickelback
  • Placebo
  • Rage Against The Machine
  • Queen
  • Red Hot Chili Peppers
  • Rise Against
  • Scorpions
  • Steve Vai
  • Chuck Berry
  • Bon Jovi
  • 30 Seconds To Mars

2. Drop D (lowered D)

This tuning differs from the standard one in that the 6th string on the guitar is lowered one tone. In consonance with the 4th and 5th strings it gives an octave. Tablature: E B G D A D. Like any lowered tuning, it is convenient in that you can play “zeros” on it (the so-called open strings) and previously familiar chords can be pressed with just one finger, plus two more low chords are added that are not available when playing with standard tuning.

Bands that play Drop tuning D:

  • Asking Alexandria
  • Avenged Sevenfold
  • Evanescence
  • Linkin Park (later albums)
  • Papa Roach
  • Rage Against The Machine
  • three days Grace
  • Thousand Foot Krutch
  • Queens of the Stone Age
  • Deftones
  • fall out Boy
  • Shinedown
  • Amatory

3. Drop C# (lowered C sharp)

This is a tuning in which all the strings are lowered by another semitone, unlike the D tuning. Tablature: D# A# F# C# G# C#.

Bands that play in the Drop C# tuning:

  • Linkin Park
  • Attack! Attack!
  • Breaking Benjamin
  • Papa Roach (some songs from recent years)
  • Limp Bizkit
  • H-Blockx
  • Staind
  • Deftones

4. Drop C (lowered C)

This lowered tuning is quite common in alternative and metalcore music. Tablature: D A F C G C.

Bands that play in the Drop C tuning:

  • Bullet For My Valentine
  • As I Lay Dying
  • Atreyu
  • Periphery
  • three days Grace
  • System of a Down
  • Godsmack
  • Nine Lashes
  • Breaking Benjamin
  • 12 Stones
  • Disturbed
  • Lumen
  • Nickelback
  • Skillet
  • Rammstein
  • Evans Blue
  • August Burns Red

5. Drop B (lowered C)

Down tuning B is an alternative standard formation seven-string guitar. It allows you to customize six string guitar as low as a seven-string would sound, plus it makes it easier to play chords. Tablature: C# G# E B F# B. Seven-string guitar tablature: E B G D A E B.

Bands that play in the Drop B tuning:

  • Parkway Drive
  • Slipknot
  • Thousand Foot Krutch
  • Bleeding Through
  • Linkin Park
  • Amatory
  • Limp Bizkit
  • Skillet
  • Veil of Maya
  • Stigmata

6. Drop A# (lowered A sharp)

This tuning is also an alternative to the seven-string guitar lowered by a semitone. Tablature: C G D# A# F A#. Seven-string guitar tablature: D# A# F# C# G# D# A#.

Bands that play in the Drop A# tuning:

  • Bring Me The Horizon
  • Parkway Drive
  • Breaking Benjamin
  • Obey The Brave
  • The Ghost Inside
  • Korn (7-strings)

7. Drop A (lowered A)

Extremely low build. Tablature: B F# D A E A. Seven-string guitar tablature: D A F C G D A.

Bands that play in Drop A tuning:

  • My Autumn
  • Betraying The Martyrs
  • Emmure
  • Born Of Osiris
  • Within The Ruins

This is not a complete list of all guitar tunings. In addition to standard and lowered schemes, others are used: for example, when not only the 6th string is lowered, but also the 1st string. This technique is used in blues; it allows you to produce beautiful sounds by playing a slide on the first three strings. Also, in addition to seven-string guitars and baritones (guitars with an increased scale), there are now eight-string and even nine-string electric guitars. Accordingly, the tunings of these guitars are much lower.

Do you know what strings are needed for a certain tuning?

The list of musicians and groups is also far from complete. If you have suggestions for adding to the article or questions about what tuning a certain group plays in, write in the comments!

VKontakte