Many guitarists wonder which strings will best suit their tuning. When choosing, it is worth remembering that preferences for tension and string diameter are a very individual thing. It is for this reason that you should not take information from of this material as an absolute truth: we will present the most generalized and averaged data, according to which you can choose the optimal thickness of the set to suit your preferences.
For ease of reading the article, we will use whole string thickness designations (for example, 9-42 instead of 0.009-0.042).
Factors influencing the choice of string thickness
- Guitar scale: the longer it is, the tighter the strings will be, all other things being equal. In the table below we will be using the standard 25.5" scale. If you have a guitar with a smaller scale, then you will need to make a slight adjustment and go with a thicker set.
- String tension: The higher their tension, the thicker the strings - accordingly, they have a more powerful and voluminous sound. However, on the other hand, thicker strings have a smaller vibration amplitude, which is why their sound is not as rich in overtones, it is duller and flatter - this is especially audible on thin strings without winding.
- Third string: in most sets this is not wound (plain). In sets with a first string thickness of 12 or more, the third string is usually wrapped. IN in this case It’s worth considering that braiding increases tension - you’ll have to forget about bending by one and a half to two tones, although, on the other hand, in lowered tunings The third wound string sounds much fuller and richer.
- Today you can buy guitar strings in balanced sets (8-38, 9-42, 10-46, 11-50, 12-54, 13-56, etc.) and unbalanced(9-46, 10-52, 11-52, 12-56/60, etc.)
The former are usually used for standard tuning or a tuning lowered across all strings by an equal number of semitones. The second type is ideal for lovers of drop tunings (the 6th string is lowered by whole tone), as well as for those who use hybrid and open settings guitars.
- The thickest sets of strings (12-60, 13-72, etc.) are best suited for long-scale guitars - baritones. They have a scale length of 26 inches or more, and are used in very low tunings (for example, Standard A and lower).
In principle, such kits can also be used for instruments with a standard scale for deeply lowered action, however, before purchasing, you should consider a couple of nuances:
- You may simply not have enough scale adjustment options at the bridge, since lower tuning requires retuning. In this case, either replacing the bridge or switching to a thinner set will help.
- If you use a thicker set, you will either bore out the string grooves on the nut or simply won't be able to fit the strings into them. When going back to more thin strings, they will hang around in the bored grooves, making it difficult to fine-tune the guitar.
In addition, thick strings may not fit into the peg - it will also have to be bored.
Which strings are suitable for a particular tuning?
|
Guitar tuning |
Matching String Sets |
|
Standard E |
8-38 is a specific set that is more suitable for experienced musicians. The very small diameter allows you to make microbends simply by pressing the strings harder against the frets (this is especially effective when using a scalloped neck). From famous musicians Yngwie Malmsteen is a fan of this set 9-42 - suitable for a beginning musician, installed on all production Fender guitars 10-46 is perhaps the most popular caliber for standard action: the perfect balance between comfort and tone. 9.5-44 - a compromise set for lovers of dynamic sound and frequent bends 11-50 - a favorite set of musicians performing blues and light rock: allows you to swing the guitar wood to full power 12-54 - suitable, for example, for guitars with voids inside the soundboard when playing jazz and blues. High tension |
|
9-46 - similar to the classic 9-42 set for drop tuning 10-52 - analogue of the 10-46 kit for drop tuning 10-50 is not a very popular set, which, according to many musicians, is more balanced for drops and more pleasant to play than 10-52 10-60 - an unbalanced kit for those who play heavy music, this kit is used by Zakk Wylde 11-54 - bright and powerful sound when playing harmonic parts on low strings 11-56 - the most spacious and deep sound, suitable for musicians with strong fingers |
|
|
Standard D |
10-46 - light bends, tension below average. For singing lead parts 11-50 - perfectly balanced tension 12-54 - above average tension: every bluesman's dream 13-56 - strong tension, deep and powerful tone |
|
10-60 is a good choice for this tuning: 1-3 strings stretch well, low strings sound monolithic and deep 11-52 - minimum thickness for this tuning, tension below average 11-54 - classic set for drop C 11-56 - enhanced sound of low strings, the difference is not always noticeable 12-54 - thicker high strings, more suitable for playing harmonic parts 12-60 - strong tension, good choice for heavy music with minimum quantity lead party |
|
|
Standard A |
14-68 - medium tension, excellent balance |
Helpful tip: If you want to tune your guitar to B Standard or lower, consider buying a baritone or 7-string guitar - you need to understand that not all types of 6-string electric guitars are designed for experimenting with strong detuning.
Let us repeat that these recommendations are conditional and partly subjective. Suffice it to remember the great SRV, which used the 13-56 kit for the Standard Eb build: therefore, the most important thing is your feelings. Try several different sets, experiment - and you will certainly find the optimal set for your music!
Based on materials from an article by Egor Kalgannikov, 12.2013.
In this article on the site we will talk about alternative guitar tunings.
Unusual setting guitars are a type of tuning that differs from the classical and generally accepted fourth tuning.
It is important to understand that we are talking here about open strings ah, that is, notes will be extracted from open strings without pressing.
Classic setting six string guitar in notes it looks like this (from the first string to the sixth): E (mi), H (si), G (sol), D (re), A (la), E (mi).
This tuning is used by guitarists 95% of the time and is considered the default tuning.
For example, if you see a chord grid with the indicated finger placement, it means that this classical tuning is implied, and you only need to use it.
On the other hand, there are a lot musical groups, who take advantage of their individual customization of tools. Often, such an alternative tuning differs little from the generally accepted one, and the changes affect only individual strings.
For example, the sixth bass string in heavy musical styles often drops a tone lower - from MI - to RE, adding an additional seventh string SI (the thickest).
Similar techniques of alternative tuning are used on the bass guitar, especially the five-string, where instead of the classical MI there is a SI or even a SI-flat in the bass.
If you look at the tabs of the same Korn, Sepultura or Cannibal Corpse, you will definitely notice the use of alternative guitar tuning.
However non-standard setting The guitar is not limited to just one string. The same metal bands, in order to give the music more heaviness and darkness, rebuild the entire guitar.
For example, the classical guitar tuning often shifts entirely down a semitone or tone, moving from the general tuning of fourths MI to the general tuning of RE.
All this is implemented simply: all the strings of the guitar are lowered at the same interval lower, which achieves a special lowered sound.
On the other hand, alternative guitar tunings are often used in other styles.
In jazz, in blues, in grunge and even in rock.
For example, when playing with a slider (a special tip placed on the guitarist’s finger), it is very convenient to line up the guitar in fifths, so that when the fret is pressed, a whole chord can be heard without dissonant notes. Similar practices are found in other styles of music.
Unusual guitar tuning, alternative tuning
In order not to bore the reader with long stories, we will present several alternative tuning options for a six-string guitar. You can use these settings variations at your own discretion.
For example, to diversify your playing, to find new musical ideas, to change the monotonous classical sound of an instrument...
Alternate tuning of a guitar is usually implemented so that all of the open strings of the instrument produce a specific minor or major chord.
When playing in this tuning, you can simply press entire frets of the guitar and get new chords.
For example, by tuning a guitar in D major and plucking all the strings at the fifth fret, you will get a pure G major, and at the seventh fret you will get an A major.
Note: The examples below indicate an alternative order of notes from the SIXTH string to the FIRST string (the sixth is the far left and the first is the far right).
To execute correct setting you will have to either tighten or loosen individual strings, go beyond the generally accepted tuning.
1. Alternative guitar tuning in D major (D):
2. Unusual guitar tuning in G major (G):
3. Tuning a six-string guitar in the key of C major (C):
4. Alternative tuning E major (E):
5. Non-standard system G minor (Gm):
6. Alternative guitar tuning in D minor (Dm):
7. Unusual system six-string guitar in the key of A minor (Am):
And a few more completely unusual configuration options:
8. SOL fret tuning (G):
9. Alternative tuning in PE fret (D):
10. Guitar stand in A major (A major):
11. Tuning a guitar with sol bass:
12. Unusual tuning of an instrument with bass BEFORE:
13. Bass retuned to PE (D):
14. Guitar tuning with a lowered first string:
Note: "B" is the symbol for B-flat, and simply B is written as "H". Moreover, in the pictures for this article, “B” indicates the note SI.
This confusion is associated with the notation of the SI note in various options musical notation, but don't let that scare you. In the article, the pure note SI is designated exclusively as “H”.
As you can see, there are different approaches to rebuilding a six-string instrument. In some cases, all notes are changed, and in some situations, only some strings are twisted (not all).
For example, changes are often made to the bass strings, and you may see this option especially often. The most problematic type of guitar tuning is adding strings.
To implement such a tuning, you will either need to use a seven-string instrument, or shift all the strings, adding a thick B string in the bass.
In general, such alternative settings you could come up with your own by experimenting with different guitar tunings.
Don't think that everything possible options are limited only to the 14 examples described above. In fact, there are many, many more alternative configuration methods!
Non-classical settings are used for the convenience of playing certain musical genres or pieces of music.
Classic setting method
- tuning fork
- The 1st string is used to tune the 2nd string, which, being pressed at the V fret, should sound the same as the 1st open (not pressed) string.
- The 3rd string, pressed at the 4th fret, is tuned to the 2nd open string.
- The 4th string, pressed on the V fret, is tuned to the 3rd open string.
- The 5th string, pressed at the V fret, is tuned to the 4th open string.
- The 6th string, pressed at the V fret, is tuned to the 5th open string.
Tuning with harmonics and temperament
Allows for much more precise tuning, since the accuracy of the frets is not always sufficient.
- The 1st string is tuned using the reference sound - the sound of a tuning fork - or the sound of an already tuned musical instrument.
- The 6th string is tuned so that its harmonic at the 5th fret sounds in unison with the 1st string.
- The 5th string is tuned so that its harmonic at the 7th fret sounds in unison with the 1st string, and then it is slightly pulled up so that a beat occurs with a frequency of 0.372 Hz (one beat in 2.7 seconds).
- The 4th string is tuned so that its harmonic at the 7th fret sounds in unison with the harmonic of the 5th string at the 5th fret, and then slightly tightened so that a beat occurs with a frequency of 0.497 Hz (one beat per 2.01 seconds).
- The 3rd string is tuned so that its harmonic at the 7th fret sounds in unison with the harmonic of the 4th string at the 5th fret, and then slightly tightened so that a beat occurs with a frequency of 0.664 Hz (one beat per 1.51 seconds).
- The 2nd string is tuned so that its harmonic on the 5th fret sounds almost in unison with the harmonic of the 1st string on the 7th fret, but is just a little short so that beats with a frequency of 1.12 Hz are heard (one beat per 0.9 seconds).
When tuning using the tuning fork A (“A”), the 5th string is tuned first (the harmonic on the V fret in unison with the tuning fork), then the 1st and 6th, and then the 4th, 3rd and 2nd.
If you have good hearing and have gained enough experience, you can do without using harmonics, catching the beat of overtones in the sound of open strings.
Since changing the string tension leads to deformation of the guitar body and detuning of the remaining strings, it is recommended to tune the guitar in 2-3 iterations, the first of which can be done without temperament (without carefully counting the beat frequency).
Lower tunings of a six-string guitar
Decreased (i.e. lower than the normal EBGDAE tuning) tunings are used for more comfortable playing a certain key, or to obtain a lower, “heavy” sound. In particular, many rock guitarists love the so-called. Drop tunings, which are named by adding to “Drop” a note on the 6th string that drops 1 tone below the first (for example: Drop C = DAFCGC). To rebuild from classical system in any lowered mode, all the strings of the guitar are lowered by a certain interval (for example, to change to tuning D, you need to lower all the strings of the guitar by a tone). To lower the guitar's tuning by more than a tone, you may need to change the strings to thicker ones due to the weakening of their tension. Also, for tunings below B (B), mostly baritone guitars are used.
| String | Scale E♭ (E-flat) | Build D (re) | Scale D♭ (D-flat) | Build C (before) | System B (si) | |||||
|---|---|---|---|---|---|---|---|---|---|---|
| Note | Frequency (in hertz) | Note | Frequency | Note | Frequency | Note | Frequency | Note | Frequency | |
| First | e♭¹ (E-flat first octave) | 311.13 | d¹ (D first octave) | 293.66 | d♭¹ (D-flat first octave) | 277.18 | c¹ (to the first octave) | 261.63 | b (B small octave) | 246.94 |
| Second | b♭ (B-flat small octave) | 233.08 | a (A small octave) | 220.00 | a♭ (A-flat small octave) | 207.00 | g (small octave sol) | 196.00 | g♭ (G-flat small octave) | 185.00 |
| Third | g♭ (G-flat small octave) | 185.00 | f (f small octave) | 174.62 | e (minor octave E) | 164.81 | e♭ (small octave E-flat) | 155.56 | d (small octave D) | 147.83 |
| Fourth | d♭ (D-flat small octave) | 138.59 | c (to small octave) | 130.82 | B (big octave B) | 123.48 | B♭ (B-flat major octave) | 116.54 | A (A major octave) | 110.00 |
| Fifth | A♭ (A-flat major octave) | 103.80 | G (major octave G) | 98.00 | G♭ (G flat major octave) | 92.50 | F (major octave F) | 87.31 | E (major octave E) | 82.41 |
| Sixth | E♭ (major octave E-flat) | 77.78 | D (major octave D) | 73.91 | D♭ (D-flat major octave) | 69.30 | C (to major octave) | 65.41 | B¹ (B counter octave) | 61.74 |
| Sheet music |  |
 |
 |
 |
||||||
Open C
One of characteristic features is the ease of extracting basic major chords. A simple barre on the 2nd fret will give "D", 4th fret will give "E", 5th fret will give "F" and so on. Open strings will give you "C".
In order to tune a guitar in “Open C”, you need (starting from the “standard tuning”): 1st string (thin) Leave as in “ standard system" - "Mi" ("E")
2nd string. Raise half a step to “C” (“C”)
3rd string. Leave as in “standard tuning” - “Salt” (“G”)
4th string. Lower one step to “Before” (“C”)
5th string. Lower one step to “Salt” (“G”)
6th string (thick). Lower by two steps from “E” to “Do” (“C”)
Raised tunings of a six-string guitar
Tuning a guitar, especially a classical one, can damage the instrument., as well as to injuries due to a sudden break of a tightened string.
To increase the tuning, you can use a capo. If rebuilding your guitar is necessary, it is recommended to use a thinner set of strings.
| String | Build F (fa) | Tuning F# (F-sharp) | Tuning G (sol) | G# scale (G sharp) | System A (la) | |||||
|---|---|---|---|---|---|---|---|---|---|---|
| Note | Frequency (in hertz) | Note | Frequency | Note | Frequency | Note | Frequency | Note | Frequency | |
| First | f¹ (fa first octave) | 349.23 | f¹# (F-sharp first octave) | 369.99 | g¹ (sol of the first octave) | 392.00 | g¹# (G-sharp first octave) | 415.30 | a¹ (A first octave) | 440.00 |
| Second | с¹ (to the first octave) | 261.63 | с¹# (C-sharp of the first octave) | 277.18 | d¹ (D first octave) | 293.66 | D¹# (D-sharp first octave) | 311.13 | e¹ (E first octave) | 311.13 |
| Third | g# (G-sharp small octave) | 207.00 | a (A small octave) | 220.00 | a# (A-sharp small octave) | 233.08 | b (B small octave) | 246.94 | c¹ (to the first octave) | 261.63 |
| Fourth | d# (d-sharp small octave) | 155.56 | e (minor octave E) | 164.81 | f (f small octave) | 174.62 | f# (F-sharp small octave) | 185.00 | g (small octave sol) | 196.00 |
| Fifth | A# (A-sharp major octave) | 116.54 | B (big octave B) | 123.48 | c (to small octave) | 130.82 | c# (C-sharp small octave) | 138.59 | d (small octave D) | 147.83 |
| Sixth | F (major octave F) | 87.31 | F# (F-sharp major octave) | 92.50 | G (major octave G) | 98.00 | G# (G-sharp major octave) | 103.80 | A (A major octave) | 110.00 |
| Sheet music |  |
 |
 |
 |
 |
|||||
"Drop D" formation
This tuning differs from the classical one in that it is lowered by tone sixth string. It is often used by hard rock electric guitarists because it makes it easier to play 5th chords. power-chord), also some works were written for him classical guitar(in the keys of D major and D minor).
"Drop C" formation
Used to produce an even lower and “heavier” sound on an electric guitar. Unlike the classical system, all strings except the sixth tune in to tone below and sixth string- on two tones.
Like Drop tuning D is used to play fifth chords.
Double Drop-D formation
The tuning is similar to Drop D, differing in that the first string is lowered a tone. For tuning from classical tuning first And sixth the string is lowered to tone.
In this tuning, the top four open strings of the guitar form a G major chord, making it easier to play with slide. Double drop D was often used by performer Neil Young.
Build "DADGAD"
The tuning most often used in folk music. It was invented by British guitarist David Graham for more convenient playing from notes recorded for violin or bagpipes.
To reorganize the “DADGAD” system from the classic one, it is necessary to lower it to tone first, second And sixth strings.
Build "DADDAD"
The “Papa-Papa” tuning is most suitable both for use in folk music (Celtic) and for playing rhythm guitar parts in “heavy” (alternative) music, 4 notes at a time. To change the tuning “DADDAD” from the classical one, you need to lower it to tone first, second And sixth strings. A third tune in unison with fourth.
Build "Open D"
In this tuning, the open strings form a D major chord. It is used primarily on slide guitars.
To rebuild into this system from the classical first, second And sixth strings drop to tone, third goes down to semitone.
"Open G" build
In this tuning, the open strings form a G major chord.
To change to "Open G" tuning from the classic first, fifth And sixth strings drop to tone.
"New Standard"
Also known as "Crafty tuning". A tuning developed by musician Robert Fripp and used by him since 1983. In contrast to the classical “quart” tuning, the tuning proposed by Robert Fripp is closer to bowed string instruments, and first, second And third the strings are tuned similarly to a violin. Tuning to this tuning may require replacing the lower strings with thicker ones and the upper strings with thinner ones.
"Alternative tuning Cross A"
E-A-E-A-E-A. "Sitar A" is an alternative lowered guitar tuning. Reminds me of the sound of an Indian sitar. Great for creating Indian (oriental) music.
Seven-string tunings
Standard
The structure of the strings of a seven-string guitar is mixed - third-fourth, so the chord of the open strings is consonant (major quarter-sixth chord), unlike a six-string guitar. This system is considered classical (academic).
Details Author: JetNet Views: 1003 09/04/2017 19:57 Category: Where to start???In this article I want to clarify a little guitar tunings. What are they, why were they formed this way, and how to generally tune your guitar. Firstly, a little educational information. The order is indicated by letters. The letters are the notes that produce the open strings from the sixth (thickest) to the first (thinnest). Let's start with, so to speak, the standard - this standard guitar tuning.
Standard tuning E A D G B E (E)
In this tuning, the guitar is tuned in fourths, i.e. the interval between each string is a fourth. Read what it is. The exception is the second and third strings, the interval between which is a major third. They say in the jargon that the guitar is tuned in "E", i.e. these are the notes on the first and sixth strings. By tuning your guitar in this tuning, you can easily play regular full chords, major and minor. And in general, it seems to me that 90% of all songs can be played in it.
Low tuning Eb Ab Db Gb Bb Eb (E flat)
If all the strings are tuned to standard tuning and lowered each half a step, we get a lower tuning of E flat. The spacing between the strings is the same as in standard E tuning. What is this system used for? Mainly to make it easier for the vocalist to sing or for a lower and heavier sound (for example in heavy metal and other rock music).
Low tuning D G C F A D (D)
If in the standard tuning all the strings are lowered even lower - by 2 semitones, then we get the D tuning. Here also the intervals are preserved. Essentially everything lowered tunings this type is just a standard one with a lower setting. Used again for a heavier and lower sound, for example in heavy metal. The standard can be lowered further and get, for example, C (to). The meaning will be the same.
Dropped D: D A D G B E
Now this is more interesting. Take the E standard and lower the 6th string a whole tone. Now we have 2 D notes on open strings. Fifths on the sixth string are pressed not with 2 fingers, as in the standard one, but with one. This is probably the most popular tuning in alternative metal. Gives a meatier sound and expands the guitar's range. Well, convenience appears when playing fifths (power chords).
Dropped C: C G C F A D
Everything is the same as in the case of Drop D, only we take the lowered tuning of D as a basis and also lower the sixth string an additional tone. The favorite tuning of all metalcore players.
So, by equivalently lowering the strings, you can tune the guitar even higher or lower. That is, in fact, all these tunings above are variations of 2 tunings: standard and drop. They are probably the most popular among guitarists. Using just them, you can play 99% of all the songs in the world with ease. In addition to them, there are also a lot of non-standard tunings, but they are quite rarely used. And in general, you yourself can even come up with your own guitar tuning and figure out how to play it =)
One of the problems that every guitarist faces while learning is choosing a guitar tuning. The guitar tuning is determined by the sound of the open strings; accordingly, the transition to one or another key is accomplished by tuning the strings to the appropriate notes. Below is a list of the most widely used tunings:
. "Spanish" or standard. This tuning is considered a classic. This is where mastery of playing technique begins. Many people continue to play it after completing their training, since this system is universal. Designation - EBGDAE, according to strings (1st to 6th).
Drop D. One of the popular tunings, often used in rock music, especially by hard rock performers. Literally translated as "lowered D". The reason for this name lies in the fact that in this tuning the 6th string sounds a tone lower than in the standard tuning, that is, it corresponds to the note D (D). This type of tuning sounds best on an electric guitar.
Drop C. This guitar tuning, like the previous one, is based on the fact that the sixth string sounds a full tone lower than the first. However, with Drop C, strings one through five are first tuned exactly one step down from standard tuning. That is, we get DAFCGC. In this tuning the guitar sounds lower and heavier. Used primarily in heavy music.
Open D. This tuning is most often used when playing slide guitar.
High and low tunings. Often musicians lower or raise the guitar tuning by a semitone, a tone, or even more. All strings can be tuned the same or differently. However (especially classic ones) when played in high formation they are at risk of getting damaged.
. Instrumental scale. Implies a standard tuning for another instrument. You can tune it like a balalaika, charango, or cithara.
I would also like to mention that the guitar, unlike many musical instruments, is not tuned in fifth scale. Why, despite the fact that the fifth gives the purest and most pleasant sound, is the guitar tuned in such an incomprehensible, at first glance, way? The answer to this question is more than simple: standard guitar tuning provides the greatest simplicity and ease of play.
Where to start? Naturally, with mastering the technique of playing in the classical (Spanish) system. Only after studying musical literacy, especially chords, you can choose in which tuning it is more convenient to play this or that chord, this or that song. It is worth noting that for a beginner to play alternative system it will be much more difficult, especially if he does not know the barre technique.
If you play or plan to play in the future, it's worth special attention on the geometry of the neck, especially the height of the strings. The guitar may need to be re-tuned to avoid loose strings and rattling when played in the new tuning. Electric guitars for beginners are not designed for playing alternative tunings, and their sound, for example, in Drop C, may not please you. Be sure to take this into account when purchasing!