Even in ancient times, people got tired of walking on their own two feet and began to domesticate various large animals for riding. It all started with an ordinary donkey and an extraordinary horse, but after the wheel came from deep space and man tamed it, everything changed. The horses were used for sausage, and the wheels were taken in pairs and, together with boards of various configurations, carts were created. Today we will move much further and learn how to draw a Lada Priora. Lada Priora - transformer in inoperative, produced by VAZ, with a half-life of no more than one year. Most often it moves on four wheels, if it moves at all. At first, the Lada was conceived as a Soviet radio operator-spy, introduced into the German rear, but due to small government orders it had to be melted down into a car, so it looks very bad. Most often, to save kinetic energy, of the possible four doors, only the driver's door opens, and the hood is equipped with an automatic mechanism that opens only after an engine breakdown. External resemblance Frets with by car so much so that an honest Russian person doesn’t even think about it when buying, but chemical compositions, highlighted in the cabin, make him love the Lada and encourage it in every possible way. What can you do with Lada:
- You can turn the vehicle into a monoblock with one door at the back. This way you will save on door handles, side windows and strengthen the body;
- If you are a bachelor, you can remove all the seats except the driver's. This way you will increase the space inside the car and be able to transport 3 times more weight in the cabin, or one whole live cow;
- By removing the roof, you can easily turn your Priora into a bathtub on wheels;
- With the help of an invisible cord, you can move even without gasoline if you tie the car to another vehicle;
- In the film Transformers, Lada and other VAZ products were not used due to the uncertainty of whether this device belongs to vehicles;
- In American films, Priora will never explode unless there is a bear in a hat with earflaps inside it.
Now you can try to draw this car with a pencil yourself.
How to draw Lada Priora with a pencil step by step
Step one. Draw the car body and front wheels. 
Step two. Add headlights, rear wheels and other details. 
Step three. Outline everything with a thicker line. 
Step four. Shade and write Lada Priora instead of numbers. 
A few more interesting lessons on similar topics.
The modern automobile industry surprises and delights car fans with a colossal variety of models that were difficult to even imagine just a few years ago, and therefore the possibilities for artistic image much more appeared. But in order to realize this creative impulse and draw a car, you need to know some subtleties.
What you need
In addition to patience and perseverance, to create a drawing of a car you will need:
Useful Tricks
What to do if you really want to make a drawing, but you don’t have enough skills?
You can use some tips that will allow you to find a compromise between desires and capabilities.
Draw Lada Priora
The popularity of the Lada Priora car can be explained very simply: good price, relatively good quality, but in case of an unforeseen situation on the road it’s not too bad. So for young people who have just received their license, such a car is an excellent option. So teenagers are happily engaged in the graphic materialization of their dreams, namely, drawing the Priora BPAN.
This is interesting. The abbreviation BPAN stands for No Landing Auto No and denotes a community of motorists who prefer cars with modified suspension in the direction of lower ground clearance.
Instructions:
- We start with sketches of the machine, that is, we draw two parallel lines - at the top and bottom.
We start the drawing by drawing auxiliary lines
- Between these segments we draw two curved lines on both sides.
- We take on the left wing, making its outline slightly curved to the left.
- Underneath is an arch for the front wheel. To make the arch line more voluminous, we make it double.
For the volume of the arch, we make its line double
- Draw the middle and side parts of the machine.
Make the door line curved
- The next task is to show the rear door and fender. Make a line parallel to the bottom of the body.
- Showing the arch under the wheel.
- We outline the line of the rear bumper.
Draw the lines of the bumper, arches under the rear wheel and the lower part of the body
- Let's move on to the roof. We make two perpendiculars to the front and middle windows. We draw a smooth line for the sloping rear window.
The lines of the windshield and roof should be smooth
- We draw the rear part of the body: the trunk with a small circle and an oval - LED headlights.
- Add a license plate at the bottom.
- We are working on the image of the rear bumper. We show the reflective element with a small rectangle.
We complete the drawing by drawing the details of the rear bumper
- Under the arches we draw semicircles with double lines - wheels. Use a soft pencil to determine the thickness of the wheel.
- We draw a few strokes in the center and on the tires, and between these lines we show the stamped Lada wheels in small circles.
- We erase the auxiliary lines, draw an outline and, if desired, color the car with pencils, felt-tip pens or paints.
You can color the drawing with simple pencils
Video: how to draw a Priora BPAN, starting with the windshield
Video: how to draw a Priora professionally
Drawing a racing car step by step
You can hardly find a car lover who would be indifferent to racing cars. Speed, mobility and beauty are what make race cars so popular. However, drawing this masterpiece of the auto industry is not so easy.
Instructions:
- The basic rule for depicting a racing car is to first convey on paper the most simplified sketch possible. In this case, we start by drawing an elongated body.
We start the drawing with auxiliary lines
- To add volume, we add the upper part - the driver's and passenger seats. Along the outer edge, based on a line drawn parallel to the outer edge, we build the interior frame.
To add volume, draw the roof lines and interior frame
- Let's start with the bottom part. We draw the bottom line, making recesses for the wheels.
Draw the recesses for the wheels, round off the line of the rear bumper
- Due to the fact that the car is located at an angle, we make the wheels oval.
Due to the fact that the machine is located at an angle, the wheels should not be round
- We make the lower part of the car curved.
To give the correct shape, we round the front part of the body
- Let's move on to the top. Add a side mirror and soften the initial lines with soft strokes.
Soften the top lines, finish drawing the side mirror
- Add two lines of the car to the side and back.
Add lines to the side and back
- We erase extra lines, we are working out the details. We start with the front lines and add headlights.
Remove extra lines and draw headlights
- Draw a line at the bottom, as well as a rectangle for the number.
We finish drawing the license plate, detailing the lines of the car
- Add several lines to the car windows, as well as a door line.
We complete the picture by drawing the doors and parts of the front of the car.
Video: two racing cars drawn from the cells of a notebook sheet
How to draw a fire truck
Modern fire engines are significantly different from those that first appeared in 1904. The old cars could accommodate 10 people and practically nothing of fire equipment. And here modern designs so spacious that they contain plenty of equipment for extinguishing fire.
Instructions:
- We draw three parallel horizontal lines, which we divide in half with one vertical line.
For a fire truck you need to make four auxiliary lines
- In one part we draw the cabin, starting from the upper part, and then drawing the lower part, which is almost half protruding.
- We make a recess along the bottom edge for the wheels.
- We depict the body in the form of a rectangle, with recesses for wheels along the lower edge. The height of the body is half the height of the cabin.
We start the drawing with the cabin and body outlines
- Draw the wheels.
- We mark the two right doors of the cabin.
- We finish drawing the stairs on the body.
In the wheels, don’t forget about drawing the rims; you can use a ruler to draw the stairs
- We add headlights, as well as a coiled fire hose, which is attached to the side.
We complement the drawing with a fire hose and the inscription 01
- The drawing is ready, you can color it if you wish.
The car can be painted with a simple pencil, but if you use paints, felt-tip pens or colored pencils, then the main shades will be red and white
The next way to draw a special equipment car will be interesting even for those guys who are not very good at drawing.
Instructions:
- Draw a rectangle and divide it vertically in half.
The basis of this machine will be a rectangle divided vertically in half.
- On the left side we draw the cabin, draw double lines to draw the windows, and draw handles.
On the left side we draw a cabin with double lines of windows
- We make windows on the body. To do this, we make the lower border just above the bottom of the cabin windows.
Drawing windows on the body
- On top we add a rolled up fire hose and a tank.
We finish drawing the tank and a rolled-up fire hose on the body
- We finish drawing the wheels and make the lines double.
Drawing wheels
- We install a flashing light on the roof of the cabin.
We finish drawing the flashing light and inventory details
- We complete the design details of the special equipment vehicle (for example, fire extinguishing tools that are attached to the outer wall of the lower rectangle).
- We remove the contour lines, and draw the main ones with a soft pencil or felt-tip pen.
The car can be painted or left in the version with outlined contours
Video: how a child over 3 years old can draw a fire truck with a marker
Drawing a police car
Depicting a police car is a tricky business. To simplify the drawing process, it is recommended to start with auxiliary elements. In addition, for this drawing we will need a compass.
Instructions:
- In the center of the sheet we draw two rectangles connected to each other by a common horizontal line. We will draw within the boundaries of this figure.
We start the drawing with two rectangles
- The upper rectangle is the car body. We show its shape with an arc.
Showing the shape of the body with an arc
- Add the front part of the car - the hood.
Finishing the hood line
- We connect the body and the hood with a soft smooth line. We erase the auxiliary lines of the rectangle in this area.
We connect the body and hood with a smooth line
- Let's give it shape. We draw holes for the wheels, and turn the line separating the rectangles into a line that “separates” the top from the bottom of the car.
Slightly tilt the line of the front part and draw recesses for the wheels
- We add a line for the trunk, rear suspension, as well as a line separating the windshield from the car body, and two vertical lines for the front door.
Add a line for the trunk and front door, and also separate the hood from the windshield
- Use an eraser to erase all the extra lines, leaving only the outline of the car itself.
Removing auxiliary lines
- Using a compass we make wheels.
Drawing wheels using a compass
- Draw the lines of the window frames, using a ruler if necessary.
To depict windows, use a ruler if necessary.
- We supplement the wheels with circles for the rims.
Draw contours and color if desired
Video: how to draw a police car without auxiliary lines
Photo gallery: drawing a Bugatti Veyron
We start the drawing with the base figure. We draw the contour lines of the supercar, as well as the bumper, side body kit, wheel arches and hood. We draw the contours of the headlights, three front air intakes, windshield and side windows, as well as the line of the driver’s door and another air intake. We detail the model: we start with the meshes. front air intakes, then move on to the headlights, rear-view mirrors, fuel tank cap, and finish with the wheels. Finish drawing the rims and tread on the wheels, remove the auxiliary lines. Draw the lines of the car.
Photo gallery: how to draw a convertible
Let's start with sketching the outline: top part has an oval shape, and the bottom consists of straight lines different angles tilt We check the tilt angles We draw the front bumper, the right fender and the holes for the car wheels We draw the windshield, the passenger side mirror and the interior of the convertible We add fog lights and draw in more detail the hood of the car, the windshield We draw the side doors on the passengers side, the contours of the rear bumper, the interior car and seats for passengers, after which we draw the folded roof of the car. Draw the wheels. Draw the rims on the wheels of the car, paying attention to the symmetry of the spokes, remove the auxiliary lines. Draw the contours and, if desired, color the car.
Drawing a car with paints
If you plan to paint the picture with paints, then it is better to take a watercolor sheet of paper - this way the strokes will be smoother and more beautiful. Otherwise, recommendations for making a drawing in paints will be as follows:
- you need to fill the contours with color only after the pencil base has been completely completed;
- before coloring, wipe off all auxiliary lines - they will interfere;
- if, in addition to the car, there are other elements in the drawing, then it is better to start with large details of the environment (roads, trees on the side of the road), but it is better to leave those objects that are in the background for last.
This is interesting. Models of toy cars can be drawn without pencil outlines, that is, directly with paints. And it is more convenient to do this with gouache, since the color is saturated and the contours do not blur, as in watercolor.
Higher philological education, 11 years of experience teaching English and Russian, love for children and an objective view of modernity are the key lines of my 31-year-old life. Strengths: responsibility, desire to learn new things and self-improvement.
"Lada Priora" is a good car in its price category. Has good qualities. This is what attracts young people who get their licenses and, for the sake of experience, are resigned to any car, as long as they have something to drive.
This makes this model vehicle quite popular. It’s not for nothing that teenagers are wondering how to draw a Priora. After all, some people are still at school sitting in class, forgetting about the teacher, and thinking about the desired car, about the early coming of age. At such moments, during boring lessons, you can occupy yourself with thoughts about the car, and in order for it to appear in reality as quickly as possible, you need to reflect your dreams on paper. Therefore, it will be useful to learn how to draw a Lada Priora with a pencil.
Preparatory stage
Based on the lesson below, you can learn to draw without any special skills. To do this, you will need a sheet of paper, maybe a notebook, a pencil (one is enough, you don’t need to buy a set). Take an eraser if you have a regular pencil and not a colored one. It is not so important, but if you have no experience in this activity, then it is better to play it safe. When you have collected everything you need, you can start learning how to draw a Priora. The work is easy and interesting.
Rear view drawing
To begin with, it’s easier to learn how to draw a rear view, and then, having gained experience and skills, you can try a different angle. It is better to have two pencils with you: soft and hard. The first is suitable for creating sketches, as it can be easily erased with an eraser, and the second is needed to draw details.
So, how to draw a Lada Priora with a pencil step by step?
Outline and front part
The first step is to create a sketch. Using light pressure from the pencil onto the paper, draw two parallel, slightly inclined lines and one at the bottom. Two curves pass through them on the left side, and on the right there are similar curves below. Between the latter there is another segment (similar to the letter “n”).
Now we proceed to a detailed analysis of the front wing. We make one of the contours clearer. We finish drawing the front, door handle and wheel arch. The lines should be smooth and curved so that the image does not look flat.
We add clarity to the middle side part of the front. Add lines at the bottom showing that the car is in motion.
The picture is becoming more and more like the real thing. We are drawing the details of the car. Draw the front mirror, but you can't do it with a simple rectangle, as the picture will turn out flat. Sketch out the shape of a parallelogram, proceed from it, drawing out the mount to the car and the sides; on the left side they should be larger.
Drawing and back
Now the stage of drawing the rear wing with the door begins. We start with the arch of the future wheel, drawing it according to the same principle as the arch of the front one. We outline the straight line that we still have from the first stage. We schematically show the lines of the bumper.
Here it becomes clear that the algorithm for how to draw a Priora is simple. If at first everything somehow didn’t fit, you had to erase and redraw, but with the roof everything is much easier. We sketch the roof lines and mark the windows.
Let's start creating the trunk and body. Draw the existing lines and add some elements. Make the headlights LED, which means that there is an oval and a circle inside the shape. Draw a place for the license plate; it should look like a parallelogram with the edges rounded at the bottom.
Now we complement the lower part of the rear bumper with additional lines and details.
Wheels
We are finishing the wheels, the arches for which already exist. In the arches we draw two semicircles, one, which is smaller, inside the other. And another circle in the center. Literally two lines help to achieve volume in the tires.
Since the car is depicted in motion, we add some touches on the wheels.
How to draw a Priora without cool, fashionable wheels? This is impossible! Circles of different diameters will allow you to achieve the desired effect. It is not necessary to make them stamped; you can draw regular disks or any others.
At the final stage, remove all the extra lines that were there at the beginning, and outline the main ones more brightly.
If you only have a pencil at hand, then the work is ready, but if you have pens or paints, it is better to add color to the drawing.
Now you know how to draw a Lada Priora car step by step. Having learned how to depict the rear view, begin to study the front. See more photos and draw.
Now you laugh, but the appearance of this car is actually a work of art. Now it seems to us that the coolest appearance can only be from a Lamborghini or. It was different before. At the beginning of the 20th century, it was believed that the most advanced form of art was cubism, or rather the desire to see regular geometric shapes in objects. It was fashionable in France, and then it reached Soviet Union. Well, it’s true that the French still believed that a car should be comfortable, reliable and durable, but this is the technical side of the issue. The soul of a Russian person requires external beauty. This is how this work of art came about:
How to draw a Lada with a pencil step by step
Step one. I draw the rectangular shapes of a car cabin. 
Step two. I'll add wheels. 
Step three. Now I'll work on the headlights appearance. 
Step four. I'll add shadows on the wheels. 
Step five. Here's the drawing I got of the Zhiguli: If you drove a Zhiguli, give it a like. And draw other cars:
- Domestic cult car -
"Lada Priora" is a domestically produced car that is quite popular among young people. Many people believe that this model is no worse than some foreign cars. The owners of such a car are simply in love with it, they drive around the city in it and share their experiences and impressions with each other. Now it has become popular to draw "Priora" BPAN, it's quite easy, you don't even need to finish it art school. How to draw "Priora"? Easy, just follow the instructions!
How to draw "Priora"
It is better for beginners to learn to draw according to instructions that will help solve the question of how to draw a “Priora” BPAN. Even a person who has never been able to boast of his artistic talents can depict a beautiful car. Perform drawing better with a pencil, so that you can erase unnecessary things or correct any shortcomings.
Instructions
So: how to draw a “Priora” BPAN with a pencil?
Anyone can understand the instructions on how to draw a Priora BPAN with a pencil step by step and draw a beautiful car!
How to draw individual elements
In addition to the question of how to draw a Priora, another one is appropriate: how to depict the Lada Priora badge. The car logo must be present in the drawing, so learning how to draw it will be useful.
The first step is to draw an oval. Then we draw another oval inside the oval, and another one inside it. Using a ruler, we draw straight lines, thereby dividing the ovals into equal parts. Then we begin to depict the icon itself. Once the logo has appeared, you can remove the auxiliary lines!