Fur, like human hair, tends to fade in the sun: fur collars and hats, after a certain period of wear, lose their brightness of color or acquire a copper tint. To restore the former brightness of colors to your favorite collar, you don’t have to turn to specialists; you can get by with your own efforts.
How to dye fur at home?
Of course, many are interested in how to dye natural fur, for example, mink or arctic fox. Fur is similar in structure to human hair, so the procedure for coloring it will be very similar to coloring hair at home.
To dye fur you will need:
- dye. It is better to choose high-quality, expensive paint; it will last longer and will not stain the fur;
- salt – 2-3 teaspoons, ammonia – 1 teaspoon, detergent – 1 teaspoon, baking soda – 1 teaspoon, 1 liter of water. The solution obtained by mixing these ingredients is used to clean fur before dyeing. Before you dye the fur of an arctic fox, mink, or any other fur, you should clean it of grease and dirt, otherwise the paint will not stick and all your efforts will be in vain;
- fatty cream (or glycerin) - it is used to treat the inside (the skin on the back of the product) in order to avoid it from drying out;
- vinegar - will be needed for rinsing fur after dyeing.
Staining procedure:
- Washing fur. The above alkaline solution is applied with a brush, then rinsed and dried naturally. Fur may shrink after washing, so it is better to stretch it on a wooden board and secure it with pins (or nails).
- Direct staining carried out quickly, on pre-moistened pile. The paint lasts as long as indicated on the box.
- After coloring The fur is kept in warm water with vinegar and dried without using a hair dryer. To prevent the product from shrinking, it is also attached to the board with the fur facing up. The fur takes the longest to dry, so do not rush to remove the product from drying if it seems that the fur is already dry.
Many people are interested in how to dye white mink fur themselves. Unfortunately, dyeing with blonde paints can lead to the appearance of unwanted shades, which will be very difficult to get rid of. Therefore, it is better to take a white fur coat or collar that has changed color to the dry cleaner, where it will be returned to its original appearance.
Fur dyeing at home
Many people probably already have a couple of dozen things accumulated in their closets. And it seems a shame to throw it away, and it’s no longer possible to wear it. It is possible that you will show your talents and decide to create something completely new and unique from an old fur item, but this will not make the fur the same color. You can, of course, contact a specialist and he will return it to its former beauty. This requires financial investment. But you can resort to another method and dye the fur at home.
Fur products always attract attention. It’s not surprising, because they look beautiful and rich. And in the cold season they also warm well, and there is no need to make a choice between beauty and warmth. But, like any thing, over time they lose their properties. The product may still be neat and look decent, but the color changes. And this pretty much spoils the original appearance.
How to determine fur color?
First you need to determine what color you want. It is advised to paint fur products in colors that are a tone lower than the original one. But you can also highlight it. Especially if your product was white and turned yellow over time. In this case, there are two options: either make the fur dark, or try to return the color that was when you purchased it.
Determining the color scheme of fur We will consider the first option later. And in order to return white, you can purchase paint that is used for suede products. They are sold in cans. There is no need to paint along the entire length; only the ends can be treated. Spray the composition of the can at a distance of 60-70 cm. Try to apply it to all visible areas. To prevent fur from sticking together, comb the product immediately after the procedure.
Recipes for paint solution
Before you dye your fur at home, you first need to prepare it for this. Remember that paint does not work well on dirty or greasy items. It just won't penetrate deep. So first clean the item of dirt and grease. In this case, two types of solution are used. First: 1 liter of water, ammonia 25%, about 6-7 grams, add 20 g of salt and 1-2 grams baking soda. It is advisable to add another 1 g of detergent. Then soak the product for an hour, stirring it occasionally, then wring it out and rinse thoroughly with water.
Basic recipes for painting Second option: dilute half a kilo of slaked lime in 10 liters of water, add about 150 grams of alum and about 250 grams of iron sulfate. There are many more options, these are some of the most popular. You can just wash the item laundry soap. Even shampoo for oily hair will do. Just don't rub too hard to avoid damaging the fur. Please note that in order to dye fur at home, you need to take care of the skin itself.
Solutions can deplete it. To prevent this situation, you should first apply glycerin or fatty cream to the wrong side. After cleaning, the item is fixed on a flat surface. The skin needs to be stretched a little. On the same surface, the fur should be completely dry.
Method of dyeing fur yourself If you decide to change the color of a product globally, you should first bleach it. Do you think it's difficult? No, it's very similar to hair dyeing. The procedure is approximately the same. Afterwards, lighten the color after dyeing and bring it as close as possible to the color indicated on the package. You can, of course, use regular peroxide. Before you dye your fur at home, do a little experiment. Apply hair dye of the selected color to a small area that is not visible when worn.
Paint the house
This way you can evaluate the appearance of the product after the procedure. Don’t risk resorting to changing the whole thing at once. All paint manufacturers write that the final result may differ from that indicated. Especially if the fur is initially very dark. So, how to dye fur at home? Protect your hands with gloves and apply quickly. Check to see if all areas have been treated. You need to soak the paint for as long as indicated in the instructions. After the procedure, rinse the dyed fur with water.
Fur dyeing at home You can make a solution from water and vinegar. Just like after coloring your hair, you need to apply a balm. This addition will give a beautiful shine and shine to the fur. And rinse again with water. Dry gently using a towel. You can make the color completely unique by using the method used for highlighting. More precisely, paint only some areas and wrap them in foil. The result is specks of a different color against the background of the main one. Your clothes will be unusual, original and eye-catching.
After painting the color will be irresistible The product treated in this way must be cared for as before. The effect after the procedure lasts about 8 months. Further color depends on both the type of fur and the product that was used. So the procedure will have to be repeated again. But with the experience gained, it will be much easier. And you can easily choose the appropriate color, practice and create something completely extraordinary.
Natural fur and its dyeing
Dyeing natural fur has its own characteristics. For example, the Arctic fox successfully maintains color and lends itself well to such experiments. And the mink is already worse. Beaver reacts to lightening yellow, and the muskrat will surprise you with its unusual peach shade with a white bottom. Over time, the paint fades and takes on a completely different look. Return to the fox brown tint A dark solution of potassium permanganate will help.
Suede paint should be used if and only if you do not want to dye the entire fur. It will help give a new shade only to the ends of the fur and nothing more. So you learned the basic ways to restore things to their former beauty. Based on your experience of dyeing your own hair, if you have had one, choose a dye. It’s too cheap and may lose its appearance in just a week, so you shouldn’t skimp on such an important matter. You can learn more about how fur is dyed from the video.
Natural fur will conquer anyone There are many salons and dry cleaners where you can apply for fur dyeing procedures. There, a professional will take care of your favorite thing. After everything is ready, carefully inspect the result to ensure it matches your wishes. Be careful and don’t rush to run home in joy, first evaluate the product.
Video
Fur products have always been distinguished by their invulnerability to high temperature changes and other factors. external environment, however, sooner or later the fur on them may fade, lose its former shine, become stained, or simply shed. However, the loss of color in a fur coat is not a death sentence at all, and you can restore its former brightness without turning to specialists. And today we will look at how to dye natural fur (using the example of mink and arctic fox) and artificial fur in the most effective ways.
We dye products made from arctic fox fur
In case of very severe contamination or discoloration, it is necessary to treat its surface with some alkaline solution. Coloring elements do not penetrate well into the structure of oily or dirty hair. Therefore, to achieve an impeccable result, you need to make an appropriate solution. The cleaning product is prepared as follows:
- Add 2 teaspoons of salt to 1 liter of water.
- 1 teaspoon of ammonia and the same amount of detergent.
- 2 teaspoons baking soda
The resulting substance should be applied to the fur with a brush. This product dries naturally.
When processing the inside of a fur coat, you should first treat it with glycerin or fatty cream. This is done in order to prevent it from drying out.
Which color is better to choose?
The answer to this question is ambiguous. In any case, the final choice is yours. However, experts recommend painting the arctic fox in dark colors. If you want to dye your fur coat a lighter shade, pre-treat it with hydrogen peroxide.
Before you dye your fur at home, you need to thoroughly wet the fur coat in water. Apply regular hair dye to the surface of the fur. You should not hesitate to apply this substance. Do not forget about safety measures - use rubber medical gloves when working. They can be purchased at almost any pharmacy individually or in packages of 100 pieces. When applying paint to fur, smooth the fur coat with your hand - this will allow the substance to spread more evenly over the surface. After this, you need to let the product sit for several minutes (as indicated on the instructions with the paint). Next, rinse the fur in warm water. It's best to add vinegar to it. Now you can move on to drying. To prevent the fur from shrinking in the future, carefully stretch it. Pin it in place if necessary.
How to dye mink fur?
Mink fur is very similar in structure and appearance to human hair, so it should only be dyed using an aerosol or spray bottle at a distance of no less than 50 and no more than 80 centimeters from the surface. In order for the paint to be well absorbed into the material, you need to comb it thoroughly after each application of a new layer. Using a comb, the paint is more evenly distributed over the surface of a fur coat and other fur products, as a result of which they will look fresh and attractive. As we noted earlier, mink is very similar in structure to human hair. Because of this, you need to select a paint for it that would not harm its qualities. It is best to use a material that has been tested on your own curls, that is, regular hair dye. This is sold in almost every supermarket and market. The range and variety of colors will satisfy even the most capricious fashionista, so choose the appropriate option, and then feel free to apply paint to your fur coat.
Drying
As for drying, such restored products can be treated with a regular home hairdryer. At the same time, you should periodically comb the fur so that it does not mat in the future. To add shine to your fur coat, use hair balm. It will soften the fur well and make its color more saturated.
How to dye faux fur?
First of all, you need to decide what color you will dye this fur. Although in general the principle of work is no different from whether you repaint a fur coat completely or only partially treat its surface. The only difference is time.
How to dye faux fur? As is the case with natural the best way there will be hair dye. If you want to make the color of your fur coat dark or light (that is, one that is very different in shade from the true one), use permanent options. If you are going to process the fur only partially, a regular tinting shampoo is quite suitable for such purposes.
So, you bought the right paint. What to do next? Before dyeing fur at home, you need to thoroughly degrease the surface of the fur coat and remove all dirt from it. To do this, use a cotton swab previously soaked in detergent or shampoo. And one more thing - before painting, it is better to check the color of the paint on a piece of paper in advance. Sometimes it happens that the bottle does not match the specified shade. Or you just won't like him. Then you will have the opportunity to change it, and in the meantime the fur coat will not suffer from double “torture”.
How to dye fur at home? When applying the material to the fibers, make sure that the fur is evenly distributed on the surface. To avoid unpainted areas, use a comb (same as with natural products). The material itself is applied with a brush in the direction of the fibers. This way, the paint will not only capture top part fur coat, but also its fabric base.
Wait a few minutes until all the pigment is absorbed. Exact time Each paint is different, so always follow the application instructions. After the paint is well absorbed into the fur, rinse it with water and, if necessary, treat with shampoo. If the fur coat can be washed well, you can put it in the washing machine. After this, comb the fibers with a comb and let the product dry. After drying, comb again. If the fabric base of the fur coat cannot be washed, remove any remaining paint from it with pieces of a cotton swab soaked in warm water.
Conclusion
So, we found out how to dye fur at home, as well as what products you need to have on hand for this.
Alas, over time, the fur on our favorite fur coats loses its original appearance, changing in color and shape. But you don't have to run out for a new product. The first reason is that it is far from cheap, and the second reason is that we will tell you how to dye fur at home. Of course, it should be rightly noted that not everyone decides to paint at home. Most are simply afraid of ruining the fur and prefer to entrust the product to professionals. This, of course, has its own meaning. But with our recommendations, you will not only not spoil the product, but also breathe into it new life. The fur will regain its shape, the fibers will become soft, and most importantly, the color of the product will be like new again. It needs to be cleaned before painting. Without this procedure, painting may result in unpainted areas, which will only worsen the situation.
Cleaning the fur
For cleaning we need:
- water – 1 l;
- salt – 20 g;
- ammonia - (25%) -3 g;
- detergent – 1 g;
- soda – 2 g.
Mix and soak the product in the resulting solution for at least an hour. Next, squeeze and rinse well under running water. It must be completely dry before painting.
How to dye natural fur at home
For painting we will need:
- paint for fur: in relation to the original color, you need to choose a darker shade;
- fatty cream (glycerin will also work);
- vinegar.
Fur dyeing at home
- After we have cleaned the pile with the solution, we need to stretch it on the board and secure it. This will prevent the fur from shrinking.
- In order to avoid drying out the product, its reverse side must be coated with fatty cream or glycerin.
- We wet the pile a little and paint it.
- Mix warm water and vinegar.
- We place the fur coat after dyeing.
- The product should be dried without using a hair dryer.
As we can see, dyeing fur at home is not very difficult. You just need to follow the rules: before painting, be sure to clean the product with a solution, check in a small area how the pile reacts to the paint and coat the core with glycerin.
How to dye arctic fox fur at home
Painting the Arctic fox is carried out according to the same principles. It is necessary to clean it with a solution. If there are stains on the product, they can be removed with a solution of one teaspoon of ammonia and three tablespoons of salt dissolved in one liter of water.
Must be painted on damp pile. After the paint has settled, wash it off in the shower. This type of fur can be dried with a hairdryer.
How to dye fur at home with hair dye
It would seem that there is another way to dye fur at home. It turns out that regular hair dye is great for this. The advantages of this method - it turns out rich color and ease of painting. The downside is that such a rich color does not last that long, about six months.
- In order to radically change the color, the fur coat should be lightened using an oxidizing agent.
- Paint evenly with a special brush.
If you like experiments, try dyeing your fur coat in tonic. It will give a temporary shade, and you will definitely understand your preferences.
We figured out what and how to dye fur at home. After painting, special care is required. You can apply hair balm dissolved in water and rinse it off the product. The fur will get a special color and the product will last much longer. We wish you good luck!
Over time, any fur products begin to fade. Learn how to dye fur at home and you can restore it to its original color.
Preparing for painting
In order for the fur to be dyed well, the product must be pre-treated, clearing it of dirt and dust. To do this, you will need a solution of 15 g of salt, 15 g of soda, 5 g of ammonia and 7 ml of detergent. Mix all these ingredients and apply with a brush to the fur product. Rinse off any remaining solution. If the necessary ingredients are not at hand, prepare a solution of vinegar, alcohol and water (proportions 1:1:1). Treat your fur with the resulting mixture, and then wipe it with a clean, damp brush.
Don't forget to treat before painting and inner side products. To prevent deformation during work, wipe the backside with greasy cream or glycerin.
Paint for fur products
Since natural fur is similar in structure to human hair, it is recommended to dye it using hair coloring compounds. Don't save money. The higher quality and durable paint you buy, the better results you will be able to achieve. Try to choose a shade 1-2 shades darker than the existing base color. Trying to paint colors that are too light can give the most unexpected results, so if you want to achieve a more light color, it’s better to turn to professionals.
In order to return the natural color to white fur that has yellowed over time, first lighten it before dyeing. To do this, treat the villi with hydrogen peroxide. Do not over-expose the peroxide, otherwise the villi may deteriorate.
Fur dyeing
Test the dye on a small area, and if you are satisfied with the test result, proceed to dye the fur. Put gloves on your hands. Dilute the paint according to the instructions on the package. Apply the composition with a brush to the entire surface, and then rub it with your hands. This will allow you to paint the fur more evenly.
Let the paint soak in accordance with the manufacturer's instructions, and then rinse with warm water and vinegar. This will allow you to consolidate the result. You can additionally add real fur silkiness and shine. Using a brush, apply hair conditioner to the dried fur and leave it to absorb according to the instructions. After this, rinse the product thoroughly, removing any unabsorbed product residue, and dry again. The results of such painting will last for about six months, after which the procedure should be repeated.
If you need to paint only the tips of the fur fibers, then take suede paint, sold in aerosol cans. Spray it from a distance of 60-70 cm. Do not keep the can in one place for too long, otherwise the product will be painted unevenly. Brush the fur immediately with a brush to prevent the hairs from sticking together.