The portal contains addresses and telephone numbers of Moscow studios where you can order fur dyeing. Prices for the service are presented in tables convenient for comparison. Thus, you can compare the cost of services in different studios and find the best option. The portal contains reviews from visitors who have already contacted the studio or salon. This will help you find really decent seamstresses and tailors.
Which studio in Moscow is best for fur dyeing?
Fur dyeing helps restore the former beauty of hats, fur coats and fur capes, eliminates yellowing and fading, and renews the appearance of the product. If the fur on an old fur coat has a good finish, but the color has already become ugly, it is better to contact good master and carry out restoration, and not throw away or put the thing in a distant closet. Where can you dye fur with high quality, and how much will it cost?
Prices for painting fur and deadlines for completing the work
Fur products are dyed in the studio different ways, the most expensive is a gradient, and the cheapest is toning. In the first case, two-color painting is used; not every master can make a beautiful transition between colors. For difficult work You shouldn’t skimp on a specialist. A simple option is tinting, which simply gives the fur a more saturated shade and restores its shine. Such restoration can be ordered at any specialized studio for working with fur products.
The average prices are:
- Toning: from 1700 rub. for hats, from 1500 rub. for collars and cuffs, from 3500 rub. for vests and capes, from 5000 rub. for fur coats
- Coloring is calculated individually, but if there is no color change, then prices are approximately 100-200 rubles. more expensive than tinting.
Dyeing natural or faux fur takes a little time, on average 1-2 hours, it depends on the skills of the artist and the area of the product. It is faster to dye a small hat than a large, voluminous fur coat.
Unfortunately, in many studios in Moscow there are queues of clients, especially for competent furriers, so it is better to make an appointment in advance. In the table you can find the company closest to you, its opening hours and contact phone number.
What is important for the customer to know?
There are a number of cases when companies refuse to paint a client, and this is due to compliance with technological standards. The restoration goes like this:
- The lining is ripped out and the condition of the fur is checked. If the reaction is normal when moistened, then the item will be taken to work; if the subcutaneous part of the skin begins to peel off and deform, then the master will refuse. Most often, they do not take into work products that are more than 15 years old.
- It happens that after painting there is shrinkage, and you need to recut it according to your figure. The specialist should warn about such things, since for the client this is from 2 to 10 thousand additional expenses.
Products made from natural fur will never go out of fashion. And all because they are not only warm and comfortable, but also expensive and stylish. A real fur coat or vest made of arctic fox fur is an indicator of wealth and high taste. But what to do if the fur has deteriorated from age and has become faded or dull. Or you accidentally stained a product, but you can’t get rid of the stain. In this case, you just need to re-dye the fur and breathe into the clothes new life. And indeed, the painted Arctic fox looks new, as if you treated yourself to another expensive purchase.
Cleaning the fur before painting
In order for the paint to apply evenly, completely color the fur and not leave pale areas, the product must be cleaned. To do this, prepare a solution from the following ingredients:
- 2 tablespoons salt;
- a tablespoon of ammonia;
- 2 tablespoons of baking soda;
- a tablespoon of powder;
- 2 liters of warm (not hot) water.
Mix all the ingredients and carefully apply the resulting mixture to the fur. Brush over the fur item. Make sure that not only the top, but also the bottom of the fur is cleaned. After this, wipe the fur several times with a clean, damp cloth to wash off the soapy mixture. The skin on the reverse side is called the mesdra. If possible, it should not be wetted, otherwise it may shrink.
Dry the fur naturally - no hair dryer or heater. Do not leave fur items in direct sunlight. It is better to hang the fur coat or collar on a hanger and leave it in a well-ventilated place.
As you know, fur can be dyed in special workshops. But the price of such a service is quite high, and besides, you will get an unexpected result. If you dye arctic fox fur at home, you can independently control the process and, if necessary, influence it. So, how to transform a fur product?
- First you need to choose a paint. You can find special paint for fur in hardware stores. It is designed for a similar wool structure and fits perfectly onto the fibers. If you can’t find such a dye, you can use ordinary hair dye. Here you see a wide palette - from black to reddish-chestnut. It is important to take into account that you need to dye fur in more dark colors(relative to the native shade). Keep in mind that over time, tan fur will turn rusty or red, and black fur will take on a dirty brown hue.
- Dilute the paint according to the instructions. To do this, carefully observe all proportions and water temperature. Wear gloves and a respirator - inhaling paint fumes is quite harmful.
- Lubricate the flesh with fatty baby cream, glycerin or Vaseline. This will protect the skin from drying out and also prevent it from getting too wet.
- You can dye a fur coat both dry and wet. Therefore, painting usually follows cleaning the product - wet lint helps the paint apply more softly. Take an ordinary brush that hairdressers use to color strands and apply paint to the fur. This must be done quickly, but carefully. Paint over all areas so that there are no light patches left.
- To give the fur a special color, you can paint the product with several colors using a stencil. To do this, take a thick piece of cardboard and cut small asymmetrical holes on it. Apply the resulting stencil to the fur and paint the fur in certain areas brown. The next step is to paint the center of the brown spots black. This will give you a bright leopard print color.
- The fur can be dyed not completely, but only its ends. This way you will get a rich and saturated shade. Most often, the ends of the villi are made lighter.
- A great way to freshen up the product is to paint the ends of the bristles with a special paint for suede, which is sold in aerosol form. Keep the can at a sufficiently large distance and move evenly. This is much easier and faster than classic fur dyeing.
- After this, leave the fur for the time indicated on the paint package. Usually 30 minutes is enough to get the desired shade.
- Rinse the fur item thoroughly so that no paint remains on it.
- Dilute five tablespoons of vinegar in a couple of liters of cool water. Rinse the product in this solution. Vinegar will help maintain softness and shine, and also lock in the color. After this, blot the fur with a dry towel.
- To prevent the arctic fox from shrinking when drying, the inside needs to be stretched. To do this, use clothespins to hook the edges of the product and stretch it on the table. This way you will prevent deformation.
You need to dry the fur in a ventilated area, possibly on the balcony. Under no circumstances should you dry your Arctic fox in the sun, near a radiator, or with a hairdryer. Brush the fur periodically to prevent it from drying out randomly.
How to dye arctic fox fur a light shade
If natural fur The Arctic fox is already quite dark, but you don’t want to paint it a more saturated shade; it should first be bleached. This can be done using a special hair bleach or simple hydrogen peroxide.Dilute the lightening paint according to the instructions. If you are using hydrogen peroxide, dilute it with water in a ratio of 1:3. Apply the prepared product to the fur and leave for 10-15 minutes. It is not recommended to keep the bleaching composition on for a long time, otherwise the villi may become brittle. In this case, you risk being left without fur at all. After this, rinse the fur and leave to dry. Fur can be dyed after bleaching only after the product has completely dried. You should not lighten or dye your fur several times. Once will be enough, otherwise you can irreversibly damage the structure of the villi.
Don’t rush to give up your tired or damaged fur item. Ingenuity, imagination and a competent approach will allow you to update your winter products. Shine and change without cheating on yourself!
Video: how to dye fur at home
Arctic fox fur products, as well as diamonds - best friends girls. Spectacular arctic fox fur coats and coats, original vests are liked by all ladies without exception. They not only keep you warm in the harsh Russian winters, but also look royal.
Despite the fact that the wear resistance of the Arctic fox is very high, its color gradually loses its intensity. The colored Arctic fox becomes dull over time, and the white one turns yellow. The good news is that it is quite easy to restore the presentable appearance of arctic fox products by painting them. You can resort to the services of a studio, but it is much more economical to dye arctic fox fur at home.
Features of self-dying
Furriers believe that, unlike others, the fluffy and dense Arctic fox is the most practical to work with. The dyes apply smoothly and last a long time. The main thing is to strictly follow the instructions that we have compiled taking into account the recommendations of expert furriers.
Important nuance! Don't paint a new and expensive item at home just to get a different color. Paint products that you won’t mind if something happens: yellowed, faded, out of fashion, etc.
The process of updating the fur of the Arctic fox can be divided into several stages:
- Preparation;
- pre-cleaning;
- painting;
- consolidation;
- drying.
Let's look at each stage in detail.
Preparation
If you want to dye a collar that is sewn onto a coat or jacket, you need to carefully tear it off and sew it in place after all the manipulations. The lining of fur hats needs to be removed.
As for fur coats, it is quite difficult to dye large items well at home. To do this, you will have to separate it into separate skins, and then sew it back together. If a fur coat is valuable to you, it is better not to take risks. As a last resort, use a tinting spray.
Arctic fox fur cleaning
Existing dirt and greasy deposits must be removed, as they interfere with high-quality, uniform coloring. If you neglect this advice, the color in contaminated areas will turn out paler. A solution made from a mixture of the following components will help you clean natural fur at home:
- table salt - 2 tbsp. l.;
- mild detergent - 1 tbsp. l.;
- soda - 2 tbsp. l.;
- a few drops of ammonia.
Combine all ingredients, dilute in two liters of warm water. Treat pre-combed fur with the resulting composition.
Apply it with a brush, trying to distribute it evenly over the entire surface. Make sure to clean both the top and bottom of the fur, including the undercoat. Then wipe the pile with a damp sponge several times to remove the alkaline solution.
Light stains can be easily removed by pet shampoo, which can be purchased at a veterinary store. Dilute it with warm water, apply it to the product with a damp sponge and carefully clean. Then rinse off the soap mixture with a clean sponge.
The skin from the underside of the fur is called mezdra. It should not be wetted at this stage to avoid deformation. Before cleaning, lubricate the inside with glycerin to prevent it from getting wet.
Cleaning can be done much faster with the help of professional cleaning sprays, for example, the FURASOL brand.
How to dye arctic fox fur at home?
It is correct to start dyeing immediately after cleaning, since the dye adheres more softly to wet fibers.
Choosing paint
Dyes for natural fur are sold in leather goods, hardware or fur stores. If it is difficult to purchase a special dye, we recommend using regular hair dye of the desired shade. At the same time, color possibilities expand almost unlimitedly.
The Arctic fox's fur is quite dense. To obtain saturated color, you will need at least two packages of paint.
The basic rule is that fur should be dyed several shades darker than the existing one. Fans of colored fur items are advised to pay attention to the fashionable wine, dark blue palette of shades.
Experts note that such fur dyeing at home will last from 6 to 12 months. Therefore, after one or two seasons the process will have to be repeated.
Attempt at writing
If you want to dye arctic fox fur for the first time, then to ensure a guaranteed result, it is advisable to conduct a test. This can be done on a small piece or in an inconspicuous place, such as inside pockets or on the hem of a sleeve. Don't forget to protect your hands with rubber gloves.
If you are satisfied with the result, proceed to coloring the entire product. It is best to apply the coloring composition to the fur with a hairdressing brush. Distribute it, painting each strand evenly. Exposure time may vary, follow package instructions.
Having analyzed the reviews of fans of fur dyeing at home, we can conclude that a stable result is obtained when using inexpensive hair dyes. Domestic coloring compositions are more variable in color range. Such paints provide a wide field for experimentation: you can hold them until the desired shade is achieved. Then the paint must be carefully washed off with water at a temperature of 30-40 °C.
Lock color
To fix the resulting shade, dilute 5 tablespoons of ordinary table 9% vinegar in 2 liters of water, and rinse the dyed fur in the resulting solution.
If you want to make your Arctic fox's fur fluffier and silkier, apply a balm for colored hair. Some manufacturers already have this balm in their packaging. Leave for a few minutes and rinse again with running water. Then blot the product thoroughly with a dry terry towel.
Drying
Do not forget to periodically comb the pile so that it does not bunch up in one direction. A downy cat brush is ideal for brushing.
If you are working with individual skins or a collar, then before drying they should be stretched on a wooden board, secured with pins. This is done so that the flesh does not shrink after getting wet.
The drying process will be completed when not only the pile is dry, but also the core. This usually takes 2-3 days. If you did everything correctly, the item will look like new.
Creative transformation of fur
After practicing with monochromatic coloring, experiment and paint the fur in a more original way. Let's look at how to get a spectacular leopard color that won't leave the fashion pedestal.
For coloring you will need two types of paint: black and brown. Additionally, you need to make a stencil from thick cardboard. Cut a pattern of asymmetrical holes in it. Place the stencil on the fur and paint the cut out areas in Brown color as described above. The next step is to apply black highlights in the center of the brown spots.
If you want to get a spotted color, use hairdressing techniques for highlighting. For example, pre-wrap small strands of fur in foil.
Another effective option is to paint only the tips of the fibers. A rich shade will be obtained if you choose a tone lighter than the main one.
How to lighten arctic fox fur
This method is great for whitening yellowed Arctic fox items or making a dark Arctic fox lighter. To do this, you will need a hair bleaching compound or simple hydrogen peroxide. When using clarifiers, follow the instructions included with them.
Dissolve peroxide tablets in water, apply the solution to the fur and leave to act for 15 minutes. It is not advisable to leave it for more than a quarter of an hour, as the pile may thin out and become brittle.
Rinse the product and dry it. Then you can tint it to your desired shade. You should not lighten the fur of an arctic fox more than once, otherwise you risk damaging it irrevocably.
Grandma's recipe
Our grandmothers used this method to bleach yellowed fur when there were no ready-made dyes on sale. Its effect is not based on chemical reactions, and on optical illusion and lasts until the first snow. Dilute a small amount of blue in warm water, wet the sponge and lightly walk through the pile. The result will appear after complete drying.
Express method
Specially designed fur dyes, which are available in aerosol form, will help you quickly refresh your fur product.
Using this can is quite simple. Keep it at a distance of 20-25 cm and spray one by one on individual strands. To prevent the pile from sticking together, periodically comb it with a comb.
Manufacturers position this treatment as tinting. Deep coloring cannot be achieved using this method. It is good when you do not want drastic changes, but want to disguise minor defects. For example, yellowed tips or spots. This can is also convenient for stenciling. The color range of coloring aerosols is classic: white, black, shades of brown and gray.
How to paint the interior at home?
It happens that the fur is so worn out in places that the light flesh is visible through it. In such cases, its color can also be adjusted. When it comes to leather, bald spots can be tinted with leather dyes. Don't forget to lubricate it with glycerin first. It is better to use special markers of the desired shade on the finished fur product.
You probably already realized that, with the exception of some details, dyeing arctic fox fur is no more difficult than dyeing hair. The same techniques are used: uniform application, holding, fixing, rinsing with balm.
In addition, you can control the shade yourself using a preliminary test. The color obtained after dyeing in the studio may pleasantly surprise you.
Numerous reviews from owners of “revived” furs indicate that you can update your winter wardrobe at home. Do not rush to give up on faded or boring items made from Arctic fox. Fantasy and skillful hands will extend the life of expensive clothes and make your friends congratulate you on your new thing. Experiment and enjoy the warmth and beauty of your favorite things!
Have you ever thought about how to dye fur at home? But surely every modern fashionista has a vest, sheepskin coat or fur coat made of natural or faux fur in her wardrobe. During operation, the fur can change its original appearance, burn out in the sun, or maybe you’ll come up with the idea of changing the appearance of an old thing. Today, service organizations, represented in sufficient numbers, provide a full range of fur dyeing services, but, unfortunately, with an impressive cost, they do not always meet customer expectations. That is why the question of how to dye fur at home, whether it is even possible to carry out this procedure yourself, is very common today. We will talk about it within the framework of this material.
Preparatory activities
The success of the “operation” largely depends on how well the preparatory measures are carried out. When you decide to update the shade of your fur or radically change it, do not forget to clean it, because dirt prevents deep penetration of the dye and, accordingly, affects the result of dyeing.
To clean, you will need an alkaline solution made from a liter of water, 2 teaspoons of soda, 1 teaspoon of any dishwashing detergent and 1 teaspoon of ammonia, which can be purchased at your nearest pharmacy. All components must be thoroughly mixed together until a homogeneous mass is obtained. To prevent drying out, apply a rich cream, such as baby cream, to the inner layer (the bottom layer of the skin). Then, armed with a brush with stiff bristles, you should apply an alkaline solution to the fur, distributing it over the entire surface, then rinse the product thoroughly under running water and put it in horizontal position for drying.
What to paint with?
If you don’t know how to dye fur at home or what products to use, you’ve come to exactly the right place. Today, specialized stores offer quite a few professional dyes and compositions, but hair dye is still no less effective and affordable. You can find it in any supermarket at an affordable price, and the variety of shades allows you to satisfy the taste preferences of every fashionista.
So, for dyeing you will need paint, a brush with which you will apply the composition to the fur and, of course, rubber gloves - an indispensable means of protection. When choosing a brush, give preference to one with stiff bristles.
Arctic fox fur
How to dye arctic fox fur at home? Luxurious vests made from arctic fox skins have been a trend for the last few years. They will be relevant in the near future, which is why owners of such luxury need to properly care for it: update the shade of the fur every season, clean it. In addition, modern dyes allow, if necessary, to radically change the color of a fur product. So why not take advantage of this opportunity?
Deciding on the shade
If you do not know how to dye natural fur at home, in particular, arctic fox fur, it is important to become familiar with some of the nuances of the procedure. They are primarily associated with the structural features of the fur. Of course, the choice of shade lies on the shoulders of the owner of the fur product, but professionals strongly recommend dyeing arctic fox fur in dark shades. If, on the contrary, you want to lighten the product, you will have to pre-treat the fur with hydrogen peroxide.
Let's start painting
For getting maximum result, moisten the arctic fox fur with water, and then begin applying the coloring composition, paying attention to each area. After the entire composition has been applied, it is necessary to maintain the time indicated on the packaging. After this, it is enough to rinse the product under running water and dry it, placing it in a natural horizontal position.
Mink
Mink hair is identical in structure to human hair, which is why the choice of dye for mink should be more demanding. The same hair dye is perfect, but it is better to give preference to the professional series, which will give the most natural shade possible, and will last much longer than budget analogues. But some people recommend using aerosol paints. IN in this case The paint must be applied from a distance of 60-70 cm in several layers. Don’t be afraid to layer the paint - this technology will allow you to achieve an expressive and deep noble shade.
If you are looking for an answer to the question of how to dye mink fur at home, use general rules, working with any fur. In all respects, the dyeing procedure completely repeats the procedure for transforming arctic fox fur described above.
Mouton fur
This one was once the most popular look fur is still relevant today. Its popularity is largely due to the warmth and comfort that a product made from mouton fur gives. But not everyone knows how to properly care for fur, which is why, over time, there is a need for additional coloring.
Mouton products are rightfully one of the most unpretentious, but when it comes to coloring, you should be patient, be extremely careful and careful. How to dye fur at home with paint in the case of a mouton. The pile of such fur is quite thick and dense, which is why it is so important to evenly distribute the coloring composition over the entire surface.
And one more thing: before dyeing, test a small amount of pigment on a small area of the fur product - if stains and bald spots appear, it is better to abandon the idea of dyeing yourself and entrust it to professionals.
Artificial fur
Do you think only natural fur evokes admiration and admiring glances from others? For several years, faux fur products: bright, sometimes extravagant and quite affordable models, have been revolutionizing the entire idea of fashion, beauty and luxury. If you have a jacket or bag made from this material in your wardrobe, update it with dyeing. Want to know how to dye faux fur at home? We'll tell you about it.
The same hair dye is suitable for coloring - in the case of faux fur, you can experiment and give preference to brighter, acidic shades. For preliminary preparation An ordinary soap solution is suitable, which is applied with a sponge over the entire surface of the product.
In order to get an ideal result, before painting, do not just lay the product in a horizontal position, but also stretch it well. This will help avoid the formation of bald spots.
Let's sum it up
We tried to figure out how to dye fur at home, and listed several of the most effective ways. With the proper approach to the procedure, using high-quality materials and tools, you can achieve amazing results. In addition, dyeing fur, both natural and artificial, at home will not take up a lot of your time and, most importantly, money. We hope that you will appreciate the information presented and be sure to take advantage of our tips and recommendations.
Over time, any fur products begin to fade. Learn how to dye fur at home and you can restore it to its original color.
Preparing for painting
In order for the fur to be dyed well, the product must be pre-treated, clearing it of dirt and dust. To do this, you will need a solution of 15 g of salt, 15 g of soda, 5 g of ammonia and 7 ml of detergent. Mix all these ingredients and apply with a brush to the fur product. Rinse off any remaining solution. If the necessary ingredients are not at hand, prepare a solution of vinegar, alcohol and water (proportions 1:1:1). Treat your fur with the resulting mixture, and then wipe it with a clean, damp brush.
Don't forget to treat before painting and inner side products. To prevent deformation during work, wipe the backside with greasy cream or glycerin.
Paint for fur products
Since natural fur is similar in structure to human hair, it is recommended to dye it using hair coloring compounds. Don't save money. The higher quality and durable paint you buy, the better results you will be able to achieve. Try to choose a shade 1-2 shades darker than the existing base color. Trying to paint colors that are too light can give the most unexpected results, so if you want to achieve a more light color, it’s better to turn to professionals.
In order to return the natural color to white fur that has yellowed over time, first lighten it before dyeing. To do this, treat the villi with hydrogen peroxide. Do not over-expose the peroxide, otherwise the villi may deteriorate.
Fur dyeing
Test the dye on a small area, and if you are satisfied with the test result, proceed to dye the fur. Put gloves on your hands. Dilute the paint according to the instructions on the package. Apply the composition with a brush to the entire surface, and then rub it with your hands. This will allow you to paint the fur more evenly.
Let the paint soak in accordance with the manufacturer's instructions, and then rinse with warm water and vinegar. This will allow you to consolidate the result. You can additionally add silkiness and shine to natural fur. Using a brush, apply hair conditioner to the dried fur and leave it to absorb according to the instructions. After this, rinse the product thoroughly, removing any unabsorbed product residue, and dry again. The results of such painting will last for about six months, after which the procedure should be repeated.
If you need to paint only the tips of the fur fibers, then take suede paint, sold in aerosol cans. Spray it from a distance of 60-70 cm. Do not keep the can in one place for too long, otherwise the product will be painted unevenly. Brush the fur immediately with a brush to prevent the hairs from sticking together.