What flowers can you get brown from? How to get orange color by mixing paints

17.04.2019

Theoretical knowledge about color gives the concept that the main colors are: yellow, red and blue. Combining any two of these colors will produce an additional secondary color. contains everything that, when mixed, produces tertiary colors.

How to get brown using primary colors

To find out how to get brown from paints and what base dyes you need, you need to use the color triangle. to obtain brown, green and red or an equivalent combination of blue, yellow and red will be used.

How to get brown color from paints by mixing primary and secondary colors? You need to mix:

green and red;
yellow, blue, red (color pigments must be taken in equal proportions);
orange and blue;
gray and orange;
magenta and yellow;
yellow, orange and purple (primary colors can be divided into additional colors, according to the color wheel);
green, purple and orange (green is a combination of yellow and blue, purple is a combination of blue and red, and orange is a combination of red and yellow).

How to get dark brown color

To obtain the desired dark tones of brown, a small amount of black paint is added to the red, orange and yellow pigments. Color saturation is obtained by mixing yellow, blue and red in various proportions experimentally:

is formed by combining red, yellow and black with a drop of green.
Mixing red, yellow, white and black produces dark brown.
The red-brown shade is obtained by the predominance of red pigment in brown paint.

Yellow, blue and red are the main colors that answer the question: how to get brown from paints? Therefore, in order to give the brown color the necessary various shades, use the predominance of yellow, blue or red over other colors (red pigment makes the color warm with a hint of rust, blue gives depth and brightness).

How to get light brown color

White is added when it is necessary to create light shades. Blue, red and yellow with the addition of white gives a light brown color. Maximum quantity The yellow pigment in the paint forms ocher, which helps create light shades.

Creating shades of brown using bright primary and secondary colors does not always give the clean and beautiful color needed for the job. Color theory is based on light, so the answer to the question of how to get brown color from paints will help to give the natural shades present in ready-made artistic colors sienna, ocher and umber. These paints contain natural, natural earth pigments, so when working, don't limit your skills to just color.

To create beautiful brown tones, you need to learn to find a balance between colors (if the color scheme has acquired a greenish tint, eliminate it by adding red pigment, and in order to remove the rusty tint of red, add green). There are many variations of brown and you can always get the desired and desired shade when working with primary and additional colors and natural pigments.

Learning to draw: mixing acrylic, oil, watercolor paints. All kinds of shades from three primary colors.

Without creativity, human life is empty and uninteresting. Painting, like music, is learned not only in order to be realized in life, but also in order to find an outlet in life, a hobby that will bring joy and peace to life. And where there is drawing, so is mixing colors. This is exactly what this article is dedicated to. In it we will tell you how to mix and obtain new colors and shades of the most common paints in painting.

How to properly mix acrylic, oil and watercolor paints to obtain the desired color: table, proportions

Mixing acrylic paints

We suggest that you familiarize yourself with the lesson famous artist and a called teacher, author of Acrylic Painting with Lee Hammond. Lee Hammond warns that although we supposedly know from childhood that mixing red and blue will get purple, acrylic paints have a different pigmentation and most likely you will find brown on the palette.

Important: read the pigments on the packages. Have you seen on store shelves there are up to 15 types of the same shade? Do you think this is to fill a display case? No, it is the same color with different pigments. Therefore, we write down or photograph on a smartphone the color - the necessary pigment - and with this we go to the store to replenish the paints.

Also note that the pigments are transparent, translucent and dense in consistency. Therefore, you can buy completely different structures from the same paint manufacturer. This is not a defect, but the properties of the pigment.

So, in order to get an almost full range of colors, only 7 colors are enough. For beginners, it is recommended to purchase exactly these colors, and in the future, at your own discretion, purchase additional shades.

Please note that we do not specifically translate the names of the primary colors so that you can name them in the store and purchase the necessary pigments:

Base: Cadmium Yellow Medium
Base: Cadmium Red Medium
Main: Prussian Blue
Additional: Alizarin Crimson
Additional: Burnt Umber
Neutral: Ivory Black
Neutral: Titanium White

We bought, prepared the canvas for the experiment and move on to the magic.

Experiment one - mix each color with white and get new, amazing pastel and delicate shades. We provide a table of strokes with a caption of what we mixed.

Well, now, from left to right, from first to bottom, let’s look at the shades that we managed to get: fawn; peach or as it is also called coral; soft pink; beige; sky blue; gray or light asphalt.

Now we try to mix all the colors with black, the result is in the table below.

And we got these colors: khaki or dark green; chestnut; plum; deep brown; dark blue.

But this is all simple, now let’s move on to a more complex version of mixing acrylic paints, but an interesting one! Mix and get all shades of green.

As we already did, we mix the two colors that are under the stroke and get exactly this shade.

Additionally we received: olive green color; a gray-green tint reminiscent of asphalt after rain reflecting the green crowns of trees; bottle green; mint.

The next step is purple and violet tones and midtones. In order to obtain such shades, you will need to have Prussian blue or alizarin pink or cadmium red in the work kit. Two examples for mixing: Prussian Blue + Cadmium red medium or Prussian Blue + Alizarin Crimson.

The colors we got were chestnut, rich warm grey, plum and a touch of lavender.

Now add white pigment and stir, add another drop to each option. Notice the riot of color in your hands!

Sunny shades. That's what they like to call shades orange artists, these are wonderful uplifting tones. They are made by mixing red with complementary colors.

On this table we got: orange as it is, peach, brick, coral.

Earthy tones can be achieved by adding burnt umber (international meaning Burnt Umber). If there is a need to get pastel shades of these tones, then just add a drop of white pigment.

In this case, we got earthy shades: umber; brick; dark turquoise; dark sepia; dirty beige; pastel lilac; steel blue; Warm gray.

Mixing oil paints

In oil paints, the situation with the palette is a little simpler and one pigment is used in one color, so we will not give the main colors, but will leave only the name of the color. The rules that we remember from childhood are just that: rules oil paints.

What color should you get?	What colors need to be mixed
Pink	Add red paints drop by drop to white paints until the desired shade is obtained.
Chestnut	Add red to brown and, if necessary, darken - a drop of black, lighten - white.
Purple red	Add blue drop by drop to red
Shades of red	Red with white to highlight, red with black to darken, red with yellow for purples and oranges.
Orange	Add red to yellow, drop by drop.
Gold	Into yellow add a drop of brown and red until the required shade is obtained.
Shades of yellow and orange	Yellow with white, yellow with black, yellow with red and brown.
Pastel green	Yellow with a drop of blue, yellow with a drop of blue and black.
Grass color	Yellow with a drop of blue and green.
Olive	Add yellow to dark green, drop by drop.
Light green	Add white drop by drop to green, and a drop of yellow for depth of color.
Turquoise green	Green with a drop of blue.
Bottle green	Mix blue with yellow.
Green needles	Add yellow and black drop by drop to green.
Light turquoise	Add green and white to blue drop by drop to lighten it.
Pastel blue	Gradually add white to blue.
Wedgwood blue	Add 5 drops of white and 1 drop of black to blue until the desired shade is obtained.
Royal Blue	Add black and a drop of green to blue.
Dark blue	Add black to blue and a drop of green at the end.
Grey	We dilute the white with black, adding green to get an asphalt tint.
Pearl gray	Add white to black and a drop of blue.
Brown	Mix yellow, red and blue in equal proportions, diluting if necessary with white, black or green for the desired shade.
Brick	Red with yellow and a drop of blue, if necessary with white.
Brown-gold	Red with yellow, blue and a little white. Yellow mostly for expressiveness.
Mustard	In yellow, a drop of red and black, for a piquant color, a drop of green.
Beige	In brown, add a drop of white; if you need bright beige, add a drop of yellow.
Off white	In white there is a drop of brown and black.
Pinkish gray	In white, a drop of red and black.
Gray-blue	Add gray and blue to white.
Greenish gray	Add green to gray and, if necessary, white.
Light charcoal	Drops of white into black.
Citric	In white there is a drop of yellow and green, more yellow.
Pastel brown	Add a drop of green to yellow and mix with brown and white.
Fern	Green with white and a drop of black.
Coniferous	Mix green with black.
Emerald	Add yellow and a drop of white to green.
Bright light green	Add yellow and white to green.
Bright turquoise	Add green to white and a drop of black for depth of color.
Avocado shade	Add yellow to brown and a drop of black.
Royal purple	Add red and yellow to blue.
Dark purple	Add blue to red and a drop of black.
Tomato color	Dilute red with yellow and add brown.
Tangerine	A drop of red and brown into yellow
Chestnut with reddish	Dilute red with brown and a drop of black for shading.
Bright orange	Dilute white with orange and brown in equal proportions.
Marsala	Red with brown and a drop of yellow and black.
Crimson	Add white to blue, a little brown and red.
Plum	We mix blue with red and white, darken it with black.
Light chestnut	Red with yellow and diluted with black and white.
Honey	We dilute brown with white and yellow.
Dark brown	Red with yellow and black.
Gray gray	Gradually add red and white to black.
Eggshell color	Yellow with white and a drop of brown.

Mixing watercolor paints

Watercolor paints are mixed according to the same principle as oil paints, except that watercolor is translucent and the shades are more muted. We recommend working through the table above first, and only then moving on to drawing on canvas.

Basic colors for mixing paints

There are only three primary colors in paint mixing. These are red, blue and yellow. White and black are considered additional. Thanks to these colors you can get absolutely all shades of the rainbow.

This article does not give ready-made solutions, because it is impossible to squeeze out paint or smear a certain amount of milligrams, this article gives the direction in which you can go to work and develop. Try, experiment and you will definitely end up with a delicious creation. And painting works much better than any psychologist, relieves stress, distracts from problems and helps you see the beauty in the ordinary!

Video: How to get brown, purple, blue, red, beige, orange, pink, gray, lilac, black, turquoise, mint, green, olive, blue, lilac, pistachio, khaki, yellow, fuchsia, cherry, marsala, white when mixing paints?

Every novice painter knows what paints need to be mixed to obtain the desired color and knows how to use a color synthesis table. Using the color synthesis table, you can determine what will result from mixing several colors and shades and achieve the desired effect.
If you have no idea how to get brown when mixing paints, use a small palette and try several methods on it. When you mix yellow, blue and red, you get many varieties of brown. The principle of mixing along the color wheel is as follows: the proximity of colors to each other gives a pure and rich version of the mixture. The opposite effect occurs with distant colors; their proximity to complementary colors results in a gray color as a result of mixing.

It's not hard to guess the color

By combining orange and blue, we get a brown color, but if a light brown tint is needed, add white to the resulting mixture or dilute it with a yellow tone. Green and red will give the desired chocolate shade.

The dark brown color is created by combining yellow, red, black and white. An endless variety of shades of brown can be obtained by mixing several colors. There are many options - from chestnut coloring to golden honey.
Mixing yellow with red, then adding blue and mixing in white for a brightening effect, results in a red-brown tint. The chestnut tone consists of red with the addition of black.
It is not always possible to buy the necessary paints and guess the color. Armed with at least white and black paint, you can try to make any color of brown darker or lighter. Don't mix too much blue or red because you most likely won't get the desired shade of brown.
The ability to achieve the required color is used not only in the field fine arts, but can be useful for mixing various paints and plasters in construction and for repair work.

Professional palette of builders

Mocha, dark chocolate, light chestnut, café au lait, cognac, hazelnut and light brown are all shades of brown, with names more colorful than the names of paints in construction. As a rule, enamel, oil and acrylic paints have approximately the same shade names. It is mainly red, yellow, dark and golden brown. There is also copper, ivory, cream, beige.
By choosing a color “to match the tree”, they create an imitation of the colors of pine, larch, and alder. They also select options for oak, beech, walnut, and rosewood. Ashy, gray shades are used for painting metal, less often wooden surfaces. The golden-yellow range is represented by gold and copper-red enamels, including pastel beige and gold walnut.

Video review modern technologies on mixing paints

Do right choice without consulting a professional, it’s difficult. Considering the fact that paints, when mixed, may not give the result you expected. Some paints tend to undergo an undesirable chemical reaction when mixed, causing the color to change - darken, fade.

Natural wood color

A new wooden house needs to be painted. If you want to preserve the natural color of the wood, you should use colorless finishing compounds. Due to the adverse effects of ultraviolet rays and atmospheric phenomena, untreated wood ages quickly. In addition to being decorative and losing its original appearance, wood is subject to the destructive effects of insects, mold and fungi. Initially, an antiseptic is used, after assembly it is covered with a finishing decorative composition. This gives a guarantee to save on for many years properties and qualities of wooden building materials.

Floor covering

The range of coatings for wooden floors helps to create a cozy atmosphere in your home by choosing the necessary colors to suit your individual style. The final result of painting and color perception is influenced by the surface structure, type of lighting, and reflection. The colors offered by the manufacturer will not always match the color of the painted floor.

Cool shades for decoration

It is recommended to decorate the home in warm colors, but showing a strong individuality, cool options can be used in the design.
If you are an adherent of the new techno style, then it is no wonder to use cold tones of gray, khaki, and metallic. After all, such colors fit perfectly into the overall space of a single style, with its metal doors and stairs, stylized furniture, and special lighting.
High technology hi-tech style, with its strict decor and the use of plastic, metal, glass, pipes, and less often wood, does not imply warm colors. Polished surfaces, chrome-plated pipes, window blinds and high-tech innovations are held in high esteem.

When renovating or building a house, we are often faced with the choice of color. Everyone chooses the texture of the plaster, the colors of the wallpaper or the tone of the plaster, the floor covering and the color of the windows and doors based on their preferences. Price for various building materials depends on the manufacturer and the quality of the raw materials.

How to get brown color by mixing paints

Brown can be obtained by mixing different colors: since this tone is complex and all primary colors are involved in its creation. There are also a huge variety of shades of brown. To obtain them, tones such as yellow, red, blue, white, and black are added. You can always easily transform one Tone into another, since the tone is very sensitive to components, and the eye perceives a wide range of them.
Using paint, you can mix brown shades in 4 ways, 3 of which are based on the theory of complementary pairs, which implies that when mixing such colors, a gray tone is obtained, but this effect works if the color carrier is a light wave. For pigment paints there is a different layout:

Mix additional colors to get brown

A couple of additional tones: yellow + violet, where the latter is the sum of red and blue. The tone turns out to have a yellow tint.

Pair: red + green, where the second is the sum of yellow and blue.
The shades are closer to red - with medium green - rich red-brown, with emerald - dark chestnut.

Pair: orange + blue, where orange = yellow + red.

IN in this case the result is a gray-brown tone: paired with blue - medium brown with a chocolate tint; paired with indigo blue - dark brown - dark chocolate.

Do we get brown and its shades from primary colors?

If you break down the colors from which brown is made into its component parts, you can understand that it is formed only when yellow, red and blue - the main shades - come together. Therefore, it is more logical and easier to create it by mixing these three tones together. In addition, it will be much easier to control its shades by changing the amount of one of the components.

How to get medium brown?

Mix three colors to get brown - the shortest way to the classic shades of tree bark: red + yellow + indigo blue in the proportion: 1: 1: 0.5

How to get red-brown?

Red-brown can be created by mixing red, yellow, blue in the ratio: 2:2:0.5.
Like a dark color, indigo doesn’t need much to change the tone; yellow and red, on the contrary, need more, since they are light. To simplify the approach, you can always correct the resulting brown color by randomly mixing it with red and yellow, while yellow is needed to make the overall tone lighter and more saturated.

How to get dark brown?

To get dark brown, add blue (indigo) or black to the resulting arbitrary tone. Since dark brown hides the saturation of the shade, there will not be much difference between the resulting shades.

How to get taupe?

In order to get taupe, you will need any medium tone of brown to which you need to add white. If you need a darker brown: add black to it.

How to get light brown?

To get light brown into an arbitrary color you need to add white. However, this mixing often results in taupe, as we see in the previous version, so red and yellow are mixed into the resulting light taupe.
As a result, the resulting color is darkened again (due to the darker red), but if you add more white to it, the result will be more attractive (even beige):

The brightness of the resulting shades can also be enhanced:

So: let's summarize:

How to get shades of brown? Table

Let’s combine all the data into a table so that we can clearly see the relationship:
Darken brown - with black;
For red-brown – add red;
Yellow-brown (orange-brown) – yellow;
Olive brown – yellow + blue;
Purple-brown – red + blue;
Light brown – white.

The scheme of interaction of shades with brown, influencing the final tone, will also be interesting.

In the scheme, the center is the brown color, from which the shade will be built. Around it are tones for mixing. The next circle will be the resulting tones when mixing the main color with the shade-forming color, in the amount of 30%. Then shades with 10% admixture + additional: darkened (+20% black) and lightened (+20% white) from 10% shade.

How to get other colors and their shades: theory and practice. Click on the icon.

lookcolor.ru

How to get brown color when mixing paints: which ones to mix

Brown color, although not bright, is quite popular. It is used when renovating an apartment, for painting interior items, when painting with acrylic and other paints and gouache, when dyeing hair, as well as other actions. To get brown, use the mixing technique. The colors are both dark and light, and we will find out which ones later in the article.

How to get classic brown

One of the main and easiest ways to make brown is mixing green and red dye I. These colors are available in any palette of paints, from construction paints to those intended for painting on paper canvas. The use of dark green and dark red is not permissible, otherwise we will get a color close to black, but not dark brown.

The next method is to mix 3 dyes: red, blue and yellow. This method follows from the previous one; instead of green, we use blue and yellow, which when mixed give green, and as a result we get the color formula described above. This combination of colors is good when the palette runs out of green.

Another way to make brown is to mix orange and gray or orange and blue, which is more appropriate for a regular paint palette.

The last way to get classic brown is to combine purple and yellow paints. Instead of magenta, you can use violet. This option is less popular because it is difficult to control the resulting color when mixing, the slightest overdose and the shade is no longer the same.

Methods of obtaining brown flowers

Making shades of brown

A traditional palette is good, but its use is not always required, for example, when painting a wall in a hallway, a lighter tone would be more appropriate, but to give a picture realistic colors when depicting the earth, dark paint is usually used. Below are instructions on how to make brown darker or lighter:

How to get dark brown color? Let's not reinvent the wheel and offer the most effective method- this is the addition of a black component. We recommend mixing in small drops, otherwise you risk ruining the resulting paint and will have to throw it away. After adding a small dose of black, mix thoroughly until the consistency is homogeneous, only then decide whether you need to darken it further.
How to get light brown color? Here we will also follow the well-known path and propose a method for using white or white dyes. Adding lightening colors can be done more intensely than darkening ones. This is due to the fact that if you over-lighten the brown, you can always go back a couple of shades darker. The main white paint is white paint; in addition to it, you can use yellow - which will give an ocher tint, red - will give shades of rust, and blue will make it deeper and more contrasting.

For art lovers, together with Olga Bazanova, we have prepared a video lesson on mixing brown from other colors:

Pros and cons of mixing brown

No matter how strange it may sound, it’s not always possible to make brown paint with your own hands. best idea. Let's look at when it is profitable to mix, and when it is better to buy ready-made dye:

- You paint with acrylic paints on canvas - here you can make brown and its shades in any quantities and portions of colors;
- You are making repairs and there are excess paints left from which you can get brown for use in the intended design;
- You do whatever you want, but the color palette presented in stores doesn’t have what you need;
- If the design of the room includes brown walls, then you should not buy other colors to mix them; there are enough brown paints in hardware stores to choose the right one;
- If you dye your hair, you should not mix different components, even of the same shade, unless this is provided in the instructions;
- If you are not sure in advance that you will use brown.

Shades of brown

Secrets of mixing colors

- - 1. To make beautiful brown paint, use precise proportions.
    2. If you achieve the desired tone, then add the “thinner” color a little at a time, otherwise you risk ruining everything.
    3. Try to test the resulting dye on a small area to be painted, because the color in the jar and on the surface may differ.
    4. When working with a painting, you can combine paints directly on the canvas, thereby achieving an interesting effect.
    5. Before combining other paints, read the instructions; the color of the dried paint may differ from the one applied, this should be taken into account.

Conclusion

There are many ways to obtain brown colors and shades; they can be used for any painting work, but you should focus on the feasibility of mixing or purchasing ready-made ones. In addition to the main mixture, you can make many shades from light to dark, from contrasting to deep. Don’t be afraid to experiment, because all the famous masterpieces of interior design, painting and fashion items appeared as a result of a large number of tests. Tell us in the comments, what paints do you use to make your brown dye?

kraskaved.com

overview of methods and shade table

Beginning artists may have a question about how to get brown color, because it is not always found in a gouache set. This tone is not included in the group of basic ones and can be obtained from a mixture of the latter. But the wrong approach to combining paints often results in a gray mass or the wrong shade that was originally required. To create paint that is no different from store-bought paint, you need to know the tricks of coloring.

Rules for mixing tones

All information about the compatibility of shades and the features of combining paints is united by the science of coloristics. It is based on a color wheel with various tones and their subtypes. There are three basic colors - red, yellow and blue. White and black stand apart, although they are not considered basic. All other tones can be obtained by mixing paints, which is why they are called secondary (green, purple, orange, blue, etc.).

There are basic laws for mixing dyes:

all shades are divided into chromatic (color) and achromatic (white, black, gray), the former differ in color tone, lightness, saturation;
when mixing two colors located along the chord of the color wheel, an intermediate tone will be obtained;
when two opposite colors are combined from a circle, a different achromatic shade is obtained;
You can mix paints mechanically (mix colors from two tubes) and optically (put strokes on top of each other).

You can combine gouache, acrylic, watercolor, water-based emulsion, oil, and construction paints on a white palette - this is how the finished shade can be seen in detail. If there is no palette, use a white earthenware plate, or, as a last resort, white disposable (plastic) dishes or paper.

You can even make brown from plasticine or felt-tip pen ink, but the best result will be achieved when using gouache. To create brown paint, you need to prepare yellow, blue, red, green, black and white - their various combinations will participate in obtaining a new tone.

There are several methods that allow you to make the desired color from other paints. It is necessary to take classic, pure tones without impurities. There are several options - basic, three-color and intermediate, and artists also know about a number of additional techniques for creating brown.

Using primary colors

This method is the simplest, it only requires accuracy and high-quality colors.

Green with red

Even schoolchildren know from art lessons that you can get brown if you add red to green. When green is not available, you can mix yellow and blue. The latter are taken in equal proportions to create a “classic” green tone, although individual desires can be taken into account. To get a more transparent brown, you can use a little more yellow.

It is important to introduce red into green, but not vice versa. Add it drop by drop so as not to spoil the new tone, turning it into gray-brown, rusty or brick. Green will serve as the main color here, but red makes the brown tone warmer.

Orange with blue

First you need to make it bright orange(if it is not ready-made). To do this, take red and add yellow to it little by little. The amount of yellow should not be large; 10-15% of the total mass of the final color is enough. The final shade should be dark orange; a light tone is not suitable for making brown.

Purple with yellow

An intermediate method of obtaining brown involves creating purple and connecting it with yellow. First, take equal parts red and blue colors. As a result of mixing them, a noble violet is obtained. Next, they begin to gradually add yellow color, which will lighten the purple. Brown in this case will not be dark, but will have a warm, pleasant glow. Adding new portions of purple acts in the opposite way - it “cools” the shade. Using this technique, adding a large volume of yellow paint produces an ocher color.

Additional Methods

Combining dark gray with orange also produces a brown color, although it will remain cold even with the introduction of an increased amount of orange. Brown is also obtained by mixing green, purple and orange, however, such a multi-step technique is complex.

Getting a dark brown color

In any of the above options, introducing additional portions of dark color helps to achieve a dark brown tone. We are talking about blue, green and purple colors. However, the shades of brown will be different, because each component plays its role in creating them.

There is another simple way to obtain a dark brown color from acrylic, oil or any other paints. A little black paint is dripped into the finished brown. But you need to work with it with extreme caution, otherwise the color will turn dirty black. Professionals even first mix black with a small amount of white, after which they prepare brown on its basis. This will make the black softer and give a more pleasant dark brown tone.

Dark chocolate color can be obtained like this:

combine yellow and blue to get dark green;
separately mix red and a little yellow to make orange;
mix dark green and a drop of orange until you get the color of grass;
mix the prepared herbal color with red to create a chocolate color;
To make dark chocolate, add a drop of black paint.

For a milky chocolate color add white, for a golden chocolate color add yellow.

Light brown color

A light brown tone can be easily created by diluting regular brown with white paint. The more intense the bleaching, the lighter the color. It is important not to overdo it here, because brown is a warm shade, and white “cools” it. Usually 1-5% white of the total paint mass is enough to achieve a sufficient degree of lightening. You can also get light brown if you initially add more yellow, although it is quite difficult to calculate the proportions so accurately.

Medium brown color

To obtain a brown of medium intensity, mix yellow and blue in equal parts, then add 20% of red by weight of the mixture. Next, adjust the depth of the shade by adding black or white, depending on the need.

Red-brown shade

The secret to creating brown with a hint of red is adding more red to it. When you add it to green, you first get regular brown, then bring it to the desired shade. The intensity will depend on the volume of the color. In addition, the desired color is created by mixing red, blue and yellow. The most simple method“tinting” brown is adding a drop of red to the finished brown color.

Taupe color

This shade is made by combining orange and blue and then adding black paint. Also, a grayish or coffee color is obtained by mixing violet (purple) and orange with the introduction of black.

Shades of brown - table

Below is information on the colors that need to be mixed together to get brown, as well as their approximate proportions:

Artists advise buying ready-made brown if you have doubts about the quality of mixing paints with your own hands. For example, when working with acrylic, problems may arise when applied to canvas or clothing - the color on the canvas will look different depending on the manufacturer and the specific components in the composition.

It is also better to carry out tinting in a store if you have to paint a large volume of walls in the house - it is almost impossible to get a second portion of exactly the same paint without special equipment. In other situations, don’t be afraid to experiment and create new colors yourself - this will allow you to express your imagination to the fullest!

kraska.guru

How to get brown color from gouache

You've started painting with gouache and are learning how to mix colors, specifically wanting to bring out the brown tint. Unfortunately, ready-made paint sets are often limited to certain colors.

But thanks to this, you can learn how to obtain certain tones.

Things to remember when mixing

Familiarize yourself with the color wheel; it figuratively shows what shades can be obtained by combining them. It is worth noting that those colors that are located in relative proximity to each other can be easily mixed without creating a mess. When you combine two tones from a circle, you get a secondary color, and when you add it, you get a tertiary color.

When you want to make a certain shade darker, you can’t add a lot of black to it. And also when using white to combine with other tones, you will get components that will be too cool.

We must not forget the most important thing that gouache becomes lighter after drying, and the color will always differ from that originally applied to the canvas. This paint is even divided into groups based on light resistance.

You don’t need to mix a lot of colors; nothing will come of it; it’s better to have no more than three. If you mix fluorescent gouache with regular gouache, it will lose its brightness. Learn the technique of using colors. Choose the main colors to work with, dilute them in separate containers, and make preliminary strokes. When they dry, you will see if the resulting shade suits you. It is advisable to make about five of these colors, and combining them to obtain intermediate colors.

What colors does brown come from?

There are three main colors that cannot be obtained in any other way: blue, yellow and red. If you mix these three tones in equal proportions, you will get ready-made brown.

Also for removing brown classic shade use:

Red with green. If there is no second color, it can be obtained by combining blue with yellow and only then adding red until the correct tone is achieved.
Blue with orange. Accordingly, to create the latter color, a larger amount of red is mixed with a small proportion of yellow. After that, add blue little by little.
Yellow with purple. The principle of operation does not change, purple is obtained by combining red with blue, and then adding yellow. Don't forget to stir the paints when mixing.
Orange with grey. The second color is added to the first color. To get gray, you need to add a little black to white.
Purple, orange and yellow. The above describes how you can get these shades.
Purple, orange and green. Again, collect secondary tones according to the color wheel.
A messy mix of blue, yellow and red. Choose any two shades out of three, and combine them equally, and then add the last one, gradually, until you get chocolate or other brown.
A combination of all primary colors. In this case, in equal proportions to each resulting mass, all colors are gradually mixed, except for the last one. First come blue and green, then black is added to them, and then red. At the very end there is a yellow tone, it is not necessary to add it in equal quantities, the main thing is to obtain the desired brown.

It is important to know that this color has a large number of shades, depending on the proportions of mixing the various components. Large amounts of yellow will result in ocher. Red gives a chestnut tone or red-brown color, blue brings brightness and creates contrast.

If we want to get darker shades, then very little black is added to colors such as yellow, red and orange. Also, to create dark brown, mix yellow with red, and then black and white.

To make a light brown or golden brown, white is usually added to the already obtained consistency.

Learn to find a happy medium when working with different components.

What are the names of brown shades that ready-made gouache has?

Specialized art stores often sell prepared materials. They contain natural dyes and may be suitable for you. After all, it is not always possible to obtain one color or another by mixing; it happens that completely faded colors come out. Ready-made shades of brown have names such as: natural umber (natural) or burnt (dark brown with a green tint), as well as dark mars brown; natural and burnt sienna; ocher, including golden.

kakpravilino.com

How to make brown from paints: patterns and proportions

Shades of brown are popular in decorating the walls of houses and apartments, when painting landscape paintings and other creative works. Therefore, many are interested in how to get brown color by mixing paints. Brown shades are obtained by combining all primary and secondary colors. Changing an existing tone to another is quite simple, since brown color is sensitive to its components, and human eyes perceive a wide palette of them. Together with the editors of the online magazine Homius.ru, we’ll look at how to make brown from paints.

Tube paints

How to get brown from primary colors

First, let's figure out which colors are considered primary and which are secondary. The primary colors are blue, red and yellow and cannot be obtained from any other color. Secondary ones are orange, purple and green. They are obtained by mixing two primary colors with each other: orange from red and yellow, purple from red and blue, and green from blue and yellow. Brown of different shades is obtained from mixing all primary colors in equal proportions or two primary and one secondary.

Palette of colors

The easiest way to get brown is to mix yellow, red and blue. That is, from primary colors. First, red and yellow are combined (to make orange), and then blue is added. All paints are taken in equal proportions.

Color mixing scheme

You can get classic brown in several ways:

Mix red paint with green in equal proportions.
Mix red, yellow and blue paint.
Mix blue and orange paint.
Mix yellow, orange and purple paint. It should be noted that this is a rather complex and troublesome option.
Mixing purple, green and orange paint is also difficult.

Palette: paint from dark brown to light

When using the above options, brown may turn out to be slightly different shades, but they will all be close to the classic brown color. Everyone chooses to their own taste.

How to get red-brown paint

Red-brown color - how to make it from several shades

In order to get a red-brown tint, you need to combine:

red and yellow paint, but more red;
add a little blue;
approximately 0.1% white.

Dark brown color - how to make it from several shades

To obtain a dark brown color, mix red, yellow and blue paint in equal proportions. To achieve a more saturated shade, you need to add black to the desired saturation.

How to get light brown color

Light brown paint on canvas

To obtain a light brown color, combine red, yellow and blue paint. In this case, there is proportionally more yellow, and we lighten the resulting tone with white paint to the required shade. To obtain a gray-brown color, it is enough to combine orange paint with gray, and a light or dark shade can be achieved by adding white or black paint, respectively.

Attention! Everyone has their own taste and needs in choosing the colors of the interior or painting. Therefore, mix colors carefully and in small quantities, achieving the desired tone. If you are interested in painting, when mixing paints it is better to use not a brush, but a special metal tool - a palette knife. This will avoid streaks on the canvas.

Different types of paints have their own characteristics, for example, acrylic and gouache. Therefore, when mixing to achieve the desired shade of brown, it is important to take them into account.

How to make brown from gouache paints

Many of those who begin to paint choose gouache paints. They are bright, thick, dry quickly. Drawing with them is easy and fun. Stores that sell everything for creativity, including those interested in painting, sell ready-made paints. What ready-made shades of brown gouache can be found on the shelves: natural umber (natural brown), burnt umber (brown with a green tint, quite dark), dark brown (Mars), natural sienna, burnt sienna, ocher, golden ocher. This is not enough for the demanding eye of an esthete.

What colors can be used to make brown?

Then the technique of mixing ready-made paints comes to the rescue. First you need to familiarize yourself with the color wheel, which presents primary, secondary and complementary colors, and remember which of them, when mixed, give a brown tint. Nuances to consider when using gouache:

When drying on canvas or paper, gouache is much lighter, so the color will differ from what was originally applied.
Black color should be used with caution; if you need to achieve a dark shade, add it little by little.
White color is also added in small portions. Too much of this color will make the shade look cold.
To obtain a brown color, no more than three shades of paint are mixed.

How to make brown from acrylic paints

Acrylic - how to make brown from ordinary paints

Acrylic paints can safely be called universal. They not only paint pictures, but also paint stained glass windows. The possibilities for their use are much wider than gouaches or watercolors. They are easy to work with, the colors are rich and expressive. The only drawback, if, of course, it can be considered such, is the expensive price. Therefore, it is enough to buy a palette of seven colors and get the necessary ones by mixing.

How to get brown from primary colors? Red, yellow, pink, brown, blue, black and white. The laws of the color wheel will help us create the brown shade we need. Everything is the same as with other paints, but it has its own characteristics. Let's talk about them. Colors and proportions of acrylic paints to obtain shades of brown:

Avocado color - mix yellow paint with a small amount of black and brown.
Reddish-chestnut - mix red paint with a small amount of brown and black.
Chestnut - yellow paint plus red, a little black and white.
The color of honey is white paint plus yellow and a little brown.
Dark brown - yellow paint, red and black in equal proportions and a little white.
Copper gray - black paint, white and a little red.
The color of the eggshell is white and yellow paint in equal proportions and a little brown.

When painting with acrylic paints, you need to remember that when drying, the shade may be different than when applied. To get brown, you need to know how to mix the right colors. Artists who love to create with acrylic paints have developed a special mixing system to create dark and light tones. This system produces green, purple, orange and brown shades. For the base, take white color and add color; the less the base color, the lighter the shade. To obtain dark shades of the palette, black paint is added to the main color; the more black, the darker the shade. This needs to be done with caution, for example, you need a dark brown color, you need to add very little black paint, otherwise it will turn out dirty brown.

Brown mineral paint

If you need many shades of the same color for your work, it is probably better to buy a white base and mix it with the base colors. This option is more suitable for an artist who uses paint in small quantities to draw small details. Having such an arsenal, it will not be difficult to make brown paint from other colors.

To cover large areas, it is better to buy ready-made paint. Why? It's hard to stock up mixed composition for future use, and the slightest deviation in the proportion of colors can give a different shade. Fortunately, today the market offers a wide range to the discerning buyer. And if you still have questions and suggestions about how you mix colors, and where you use such knowledge, tell other readers of our online magazine about your experience. And in conclusion, we suggest watching an entertaining video about how to properly mix oil paints to get the desired colors.

How to get brown color when mixing paints

This shade is not too bright, but popular. It is actively used to decorate the interior of a room, when painting furniture, makeup, while painting canvases, and also to change hair color. Based on this, the question is what needs to be mixed with what to get desired result, is very relevant.

What colors make brown?

Proper mixing is a whole science, but today the task is made easier by a ready-made color wheel, which can be seen on the Internet. It gives an understanding that the main colors are yellow, red and blue. The circle represents the result when each of these options is mixed with each other - secondary colors. If you combine them, you get tertiary ones. There are three main laws when mixing:

Law No. 1. Each color of the circle is a symbiosis of those opposite to the center, which, when mixed, give an additional color, that is, achromatic. Complementaries are clearly defined, for example, red has green, and yellow has blue.
Law No. 2. Used in practice, it indicates that when mixing paints that are close to each other on the color wheel, new colors of the main color are formed - the one that is located between the mixed pigments. So, to get orange, you should combine red with yellow, and green - mix yellow with blue. By combining the three main components in the form of red, yellow and blue in ambiguous proportions, you can achieve any effect.
Law No. 3. When the same shades are mixed, similar mixtures are obtained. This result is achieved by combining colors that are identical in tone, but different in saturation. Another option: mix several colors through a symbiosis of chromatic and achromatic.

What colors need to be mixed to get brown?

Artists who work with gouache know that when different paints are combined, new colors are born. Even a special synthesis table has been created that helps make the necessary shades. The most basic way to get brown is to add red to green. These tones are available in any hardware store or in the office supply department. However, you cannot mix dark red and dark green, because you will get a dirty shade that will vaguely resemble black.

Don't know how to get a brown color when mixing paints if there is no green in the palette? In this case, you can use three colors: red, blue, yellow. This is due to the fact that green is obtained through the synthesis of blue and yellow. Another mixing option will use gray paint plus orange, or purple and yellow. Thus, the missing pigments that make up basic formula, you can always find a replacement.

How to get dark brown color

It’s easy to get the desired result: add a little black pigment to red, orange or yellow. Brown can be easily given different shades: you need to take yellow, blue and red as a basis, and then add other colors. For example, red helps create a warm tone with a hint of rust, while blue helps ensure the final result has depth and punch. Saturation can be achieved by combining different proportions of yellow, blue and red according to the following scheme:

Mustard can be obtained by combining red, yellow and black with a drop of green.
Dark brown will be achieved by mixing red, yellow, white and black.
Red-brown (known as marsala, similar to dark pink) should be obtained by mixing two shades: chocolate and red in large quantities.

What colors to mix for light brown shades

To create café au lait, a beautiful copper brown, an unusual taupe, or a honey brown, you should use white. How to make brown from light shades of paint? You need to add a little white to the mixture consisting of the main colors. If the consistency presented above is dominated by yellow, the result will be ocher, that is, a light shade of brown. Training with compatible proportions will help you understand how to get a brown color when mixing paints. Only in this case can you get the perfect result.

Video: what colors to mix to get brown

sovets24.ru

Everyone knows from school that if you mix three colors - red, yellow and blue, it will be brown. But the often sought after colors, as luck would have it, give completely unexpected shades. From the color of childish surprise to a fairly rich dark wood shade. So, maybe it’s not the colors that are to blame, but we didn’t listen well in art lessons? Let's figure out, together with the editors of HouseChief.ru, how to make the desired shade of brown without having to repaint the walls.

Don't forget, each person can have their own perception of color. Therefore, most likely, you and the coder seller may see the same shade differently

Read in the article

Mixing the base: how to get brown by simply combining base colors

Think about how often you have stopped in the furniture department and chosen your shade among the many colors. The fact is that, despite its versatility and seeming commonplace, brown has dozens of shades. Try mixing watercolors, even with this example it is clear that the quality and saturation of the shade depend on the proportions of the primary colors and the possibility of adding brighteners.

Important! The basic colors for producing brown are red, blue and yellow. By mixing the base, you can get many shades of brown.

Try making brown from ordinary gouache, you will get at least 5 different shades of autumn colors, isn’t it beautiful?

How to get a classic brown color when mixing paints

You've probably often caught yourself wondering why it looks this way when mixing paint, but differently after applying it to the wall? It's simple, it's a matter of lighting, simple physics. However, this must be taken into account when creating the basis.

Expert opinion

Irina Rosenstein

Designer of the studio "Cozy House"

Ask a question to an expert

“When mixing acrylic and oil paints, do not forget to thoroughly mix the white base before adding colors. It’s better to mix the colors in a small container, notice the proportions and only then “cobble” all the colors.”

Very often, coloring pigments behave aggressively. The same color from different manufacturers will differ in consistency and saturation

To make different tones of brown, you need to alternate the proportions of each shade using the random method. There are special tables for mixing colors. They can be purchased in specialized departments or checked with the seller. For example, the shade of tree bark is obtained from red, yellow and blue (indigo) in a ratio of 1:1:0.5.

How to get red-brown paint

If you need more red tint in a brown tone, then again take three primary colors, but in different proportions: 2: 2: 0.5

The process of mixing colors is fun and interesting. But don’t forget, the chosen shade should be a little darker than the desired one; when the paint dries, it most often becomes a little lighter

Advice! A tone that is too dark can always be diluted with a white base. However, base tints should be used with caution. Changing the proportion can radically change the shade.

How to get dark brown color

Usually in this case a little blue or black is added to the resulting brown tone. The effect will be approximately the same. You will get a darker shade. A deep brown tone can be used when painting walls or highlighting areas. It is highly not recommended to use this as a basis. This will significantly darken the space.

If you did everything correctly, then noble brown is guaranteed to you! The chocolate color of the walls looks elegant

How to make taupe paint

To create taupe paint, add a little white and a little less black to the mixed base. The shades can turn out to be quite interesting.

Just think how many shades of brown can be used in the interior!

Who said you can only use matte colors? You can add not only gray, but also pearlescent shades to the resulting paint. Change the consistency by including natural inclusions, for example, marble chips. This consistency will favorably highlight the shades, giving the interior a unique style.

How to get light brown color

To avoid getting the previous shade of paint instead of light brown, you need to add a little red and yellow to the resulting color. If you need a lighter tone, then add white.

How to get shades of taupe

What colors need to be mixed to get brown from different types of paints

Different types of paints behave differently when mixed. Oil paints differ from acrylic paints, and enamel paints differ from water-based paints. It is very important to consider the quality of the coating on which the tone will be applied.

Colors also have their own character. Yes, yes, that's right. Some people are “tolerant” of each other. Others are in conflict

Sometimes after mixing colors you get indecently dirty shades. The answer is simple - study special color tables or schemes. The more detailed, the more they are divided into shades, the better. The more diverse combinations will be available to you. On the color wheel, friendly shades are located nearby, but irreconcilable “enemies” are opposite. The consistency of the paints itself is of paramount importance. Let's consider the options.

How to make brown from gouache paints

If already mixed colors are mixed, then this combination is called secondary. By the way, such combinations turn out to be the most interesting.

Advice! Combining more than three colors is not recommended. It is believed that in this case there is a greater chance of “running into” an unfriendly color.

As we noted above, paint tends to lighten after drying. This effect is most noticeable when mixing gouache. Therefore, to obtain the desired shade, they are mixed in the palette. How to get brown using gouache:

Connecting green and red. If you don't have green, mix it from yellow to blue. The sequence of steps matters.
If you have orange paint, you're in luck! All that remains is to add blue. What if there is no blue? It can also be created by mixing yellow and red.
Brown can be made even from such a complex color as purple. We add sunny yellow to it, and here it is again - a rich brown color.

How to get different tones of cinnamon and cinnamon-friendly shades

Expert opinion

Irina Rosenstein

Designer of the studio "Cozy House"

Ask a question to an expert

“A light coffee shade can be achieved by combining orange and gray. Interesting? A dark shade of paint, the color of chocolate, can be obtained by mixing gray and orange. You can get a dark coffee shade if you mix purple and acid orange.”

You can see how to mix colors correctly in this video.

How to make brown from acrylic paints

Before you start working with acrylic paints, it is important to choose the right solvent. Acrylic paints can be water-soluble or organic-soluble or mixed. This means that the tinting paste itself may or may not be suitable for your base.

Advice! Before tinting, carefully read the painter's instructions and check which paint it is intended for. Be sure to stir the base before you start mixing.

You can buy ready-made shades, but it’s not a fact that they will suit your interior, and in the end they will also have to be mixed

Do not forget that it is necessary to dissolve paints approximately 15% more than the planned volume. It’s not always possible to hit the right tone and mix the paint. The tint color must be added a little at a time, stirring constantly; sometimes the tone may “settle” at the bottom of the container. Watch the instructional video on how to tint paint correctly.

When is it profitable to mix colors, and when is it better to buy ready-made paint?

It's no secret that large construction stores will offer you to create your own unique color using special tinting machines. This is quite convenient, especially when you need to paint a large area of the room. It is clear that getting into color in this case will be extremely difficult.

Computerized paint tinting is an option for those who need large volumes of complex color paint.

The machine not only uses the base, but also, according to a special program, combines the pigments itself. The disadvantage of such a machine is that it will not be able to create a unique paint, but only the one that was originally provided by the program.

If you need to create a unique, complex color, brighten up an obvious transition of colors, highlight a small space, it is better to mix them manually

Especially if you plan to use more than two secondary shades. But if the question arises whether it is profitable to buy ready-made paint, then we will answer: always leave a supply of base colors for all the paint purchased in one batch. This will help, in case of emergency, to recreate the shade.

Expert opinion

Irina Rosenstein

Designer of the studio "Cozy House"

Ask a question to an expert

“Try to record the volume of color and the sequence of mixing steps at each stage. It is likely that you will have to repeat this procedure.”

And if you have own experience creating unusual shades in the interior, do not hesitate to tell other readers of our online magazine about it HouseChief.ru.

Brown is not a bright and catchy color, but it is quite popular. It is used when creating artistic paintings with gouache and watercolors, when painting interior items, and when dyeing hair. The question of how to get a brown color when mixing paints is asked by people from different spheres of life. The answer is relatively simple.

The brownish color has a significant variety of shades. To create a suitable color, the following tones are used: yellow, red, white, blue, black. One of them can be easily converted into another by mixing coloring components.

You can create the desired color in four ways. 3 of them use the theory of complementary pairs. The idea is to combine several color schemes and form a gray base.

This method is suitable if the carrier is a light wave. You can find the answer to the question of what colors to mix to get brown after a person decides what material he is dealing with. The required colors are created from various coloring substances:

gouaches;
acrylic;
food;
oil

Gouache

The standard set of gouache for drawing has a meager number of tones. However, a professional artist writing a picturesque picture, an incredible variety of color solutions are needed. Among the small number of colors there is no brownish one.

A natural tone is obtained by mixing several dyes:

Green and reddish. If the first component is missing, it can be made from blue and yellow. Depending on the ratio of the taken elements to be painted, a certain color is obtained. More intense and deeper colors are obtained by adding a large amount of blue to the coloring structure.
Orange and blue. You can prepare the first element by combining red and yellow.
Yellowish and purple. Composite color is obtained by mixing red and blue colors.
Reddish, yellow and grey. The second is obtained by combining white with black.
Purple, orange, yellowish. The first two elements are composite.

Brownish tone has mass various types, the creation of which depends on the number of connected components.

A lighter element of the palette is obtained by adding a little white to the coloring liquid.

Acrylic

Acrylic paints are an affordable material and easy to use. Their only drawback is the narrow range of available color options.

Suitable color scheme must be created manually by combining several base and derivative tones:

Red, bluish and yellow. By combining three basic colors in equal proportions, you can create a standard brown.
Orange, purple and green. It is recommended to combine dyes in equal proportions, however, you can increase the amount of one or another component to obtain certain tone.
Orange and bluish. The perfect color can be achieved thanks to the correct proportion of 1:20.
Yellowish and purple. This combination is rarely used, since the second element is difficult to mix with other options. It is necessary to strictly maintain the ratio of 1:10.

From acrylic paint it is possible to create a suitable version of the coloring matter only after preliminary experiments on a smooth surface. You can then transfer the resulting composition to the desired location.

Food

Often, food coloring is used to decorate an attractive and tasty culinary delight. It is not always possible to find the presented shade among the palette, although it is quite often used in the design of flour products.

You can get the desired option by mixing the other two:

Reddish and green. They are used most often to obtain the required substance. They are mixed in equal quantities.
Bluish and orange. The second component in dyes is also difficult to find. For this reason, it can also be prepared by combining red and yellowish.
Black and orange. You should mix them carefully to determine the amount of ingredients to put. Excessive use of black can make the color deep and intense.
Bluish, crimson, yellowish. It is recommended to mix all ingredients in equal proportions.
Yellowish and purple. For every drop of the second ingredient there are two drops of the first.

Oily

Brownish coloring is often used by painters when painting. However, it is not included in the modest set of oil dyes. Experienced artists know that to obtain a deeper and more saturated color, they need to be mixed. Only not all colors are allowed to be combined.

To obtain this tonality, several different combinations are used:

Yellow, reddish, blue, white and black. Combining these five products will result in a medium brownish color.
Yellowish, reddish, blue, white. Mixing them will result in a golden brown hue. In the presented case, it is recommended to take to a greater extent yellow.
Black, white, red. The combination of three elements forms a brownish color.

Maintain proportions when creating brown shades, otherwise it will be impossible to choose a similar color afterwards.

Conclusion

Faced with the problem of not having the right shade, people wonder what colors should be mixed to get brown?

There are many options for creating a specific tone. The principle of making new paint of various types is the same. The structure of the material does not play a role in creating the required shade.

In order to get dark, light or red-brown paint, you can resort to mixing the three main colors of the spectrum - red, blue (cyan) and yellow in one proportion or another. In practice, you mix only two basic tones to get brown, and then add the third one to give one or another shade, and in addition the rest are used. We will tell you below how this happens and in what proportions, and in addition, we will watch a thematic video in this article as a supplement.

Five ways

Note. So, we already understand from which paints to get brown, but besides this, there are also various ways.

The most popular of them will be listed below.

The first way is to mix the orange and blue components with your own hands.
The next method involves pairing red with green.
The third option is to obtain brown from purple and yellow.
Obtaining the desired color in an additional way.
Mixing the main spectrum to obtain the desired shade.

Method No. 1

Let's see how to get a brown paint color and first we get an orange tone and for this the instructions are as follows: we need red and yellow, where the first is allocated approximately 90%, and the second - 10% (you can vary a little, depending on the need, but you need a dark orange color). Try to ensure that the output solution is much closer to red than to yellow.
Pour a little blue into the resulting mixture - its volume will be from 5% to 10% of the total composition, that is, for 90-95g of orange you need, respectively, 10-5g of blue composition. Increase the percentage until the mixture acquires a chocolate tone (if the solution is too light, add a little more blue).
Please note that you will finally be able to figure out what the result will be only after the film has dried, but in any case, it will be much lighter than in the original state. Therefore, you can do a test on any surface, and then adjust the depth using blue or orange.

Method No. 2

Now let's see how to make brown from the paints shown in the top photo - red and green. If you do not have the last shade, then you can make it by combining equal shares. You will adjust the brightness by the amount of one or another paint, that is, make the ratio not fifty-fifty, but slightly changing the proportion of one or another component, depending on your need.
After this, we begin to add the red component to the resulting solution until it darkens to the desired degree.

Advice. Any brown mineral paint, exterior or interior, will be warmer if it has a slightly greenish tint.

Method No. 3

We continue to look at how to get brown from paints, and in this case we need to mix yellow and purple, but the first may not always be available, so you can make it yourself. To do this, we mix red and blue in equal parts and this way we get a dark, saturated solution of violet (do not forget that violet is located between blue and red in the color spectrum).
Add yellowness little by little to the resulting mixture, just take your time so that you don’t end up with a too light solution - to do this you need to constantly stir the composition and this way you can control the proportions. You can change it slightly for correction. percentage, but it’s best to do this after testing on any surface. The mixture can be used for both mineral surfaces and metal.

Method No. 4

The fourth way to get brown paint is to spontaneously mix three primary colors, that is, first you pour two equal parts of two of them into one container, and then gradually add a third, getting the shade you need. In this case, the result will not be entirely predictable, since it will be difficult for you to adjust the proportions, but if you are making a solution that is enough for the entire painting area, then this is quite suitable for you.
Also, to obtain a certain gray-brown or pure tone, you can mix previously obtained more or less dark mixtures, gradually reaching the parameters you need. In such cases, you can still fix what color you get by merging different proportions, but this path is more experimental than practical.

Method No. 5

And now we will learn how to make brown paint from all available primary colors, gradually adding one after another until the consistency required in this case. First, take two dark shades, mixing them in equal proportions, and after that add exactly the same proportion of black. Now, we add the same percentage of red to the resulting solution, and bring this entire composition to a single color - if you do this in large quantities, then the most acceptable result can be achieved when working with a mixer clamped into an electric drill.
Now all that remains is to find the desired shade, for which we use the yellow component. There is no longer any clear indication of its quantity; simply, the more there is, the lighter the composition will be.

Note. When preparing brown, you should keep in mind that the primary colors here are red, blue and yellow, and the rest will be secondary. Even among the three main ones, only two colors will be primary, and the third will be secondary or auxiliary.

Conclusion

It’s not always possible to buy the right shade in a store, and it’s not even the price, but their banal absence. For example, dark brown paint can have a green or red tint, so by creating the desired color yourself, you can always achieve the best result (