In order for the paint to apply evenly and reliably color the fur, the product must be prepared for painting. To do this, the fur surface must be cleaned of grease and dirt using special means.
Before painting it is necessary to prepare the fur
To clean you need:
- Before that, you need to prepare an alkaline solution of ammonia, salt, soda and dishwashing detergent (you can use washing powder).
- The resulting slurry must be spread in an even layer on the surface to be treated using a clothes brush.
- After some time, rinse off the product with running water.
An alternative cleaning solution can be a liquid made from alcohol, vinegar and water, which is applied in the same way as the first option.
Such cleaning products are suitable for processing the fur of arctic fox, mink, silver fox and rabbit.
Typically, standard hair dye is used to refresh the Arctic fox. The fur is quite dense, and therefore you will need several packages to ensure that the resulting color is rich and uniform.
Use hair dye
In this case, you need to choose a paint one or two shades darker than the original. This will avoid unpainted areas and make the item brighter.
Before covering the entire area with paint, you should try to treat a small area. This will allow you to see how the color changes under the influence of chemicals.
Before full dyeing, check how the fur reacts to the dye.
In case of color fading (especially the tips of the pile), it is better not to dye the fur, but to lighten it. The main thing in this procedure is to choose the right composition for coloring. For this, hydrogen peroxide and ammonia, taken in different proportions, are used.
Tinted hair balm is an alternative to permanent dye.
Toning with tint balms
It will help to gently color the pile, providing the necessary care for fur products. However, this method of solving the problem is not durable, since the balm is gradually washed off when precipitation occurs in the form of snow and rain, and can also contaminate light-colored items located in close proximity to the fur.
Items made from arctic fox fur often lose their attractiveness due to yellowing of the ends of the pile. In this case, there is no need to paint the entire product. It is enough to use an aerosol can to treat suede.
Aerosol spray for painting
Before you dye arctic fox fur at home, you need to choose a suitable shade and spray it on the surface at a distance of about 70cm. To prevent the pile from sticking together, you need to constantly move the can. After applying the paint, the fur should be combed with a special brush for suede. Moreover, this must be done immediately.
IN specialized stores It is fashionable to purchase special paint in cans for caring for fur. With their help, you can quickly update the shade, making the product brighter.
Professional paint for fur
However, it also has some disadvantages: when it comes into contact with white items or a light fur coat, the dye can be transferred to lighter items. And the color itself will lose its shine and brightness within a few months.
Since mink products are considered quite expensive, dyeing of such fur should be done as delicately as possible.
Before that, you need to check the degree of contamination of the pile. A regular hairdryer will do for this. The air stream should be directed at the pile: if the fibers fall apart, cleaning is unnecessary. However, if the lint moves from one side to the other and clumps together, cleaning may be necessary.
Mink fur is dyed with hair dye
Step by step procedure
The sequence of actions in both cases is identical:
- To start painting, you need to put on gloves and take a brush. After this, apply paint to the surface and smear it so that there are no bright spots left.
- After waiting the time indicated on the packaging of the product, the product should be rinsed with water at room temperature and vinegar. To fix the pigments and make the pile shiny and soft, you need to use the balm that comes with the paint.
- Then it needs to be washed off and dried.
- Only a cleaned product can be dyed so that dirt and grease do not prevent the pigment from penetrating into the villi.
- When preparing a product for dyeing, the underside of the leather should be covered with cream (or Vaseline) to prevent the surface from drying out.
- Fur can only be dyed if it is not too old. Otherwise, it may be damaged during color change. In addition, the risk of mechanical damage to the product will increase significantly.
- You should choose a dye tone darker than the natural pile. This will help hide minor defects in the skin and give a natural shade.
- To renew fox fur, you can use a solution of manganese, diluted to dark brown tint. You need to apply it to the pile with a sponge, without touching the inner layer (skin). If you neglect to be careful, you can damage the base of the fur, which will lead to rapid wear of the item.
- Since the skins may shrink after dyeing, you need to place the product on a flat surface and secure it before applying the dye using pins or thin nails.
By using some fur care tricks, you can provide an attractive appearance to the product and extend its wear life.
It happens that with the onset of cold weather, you take your favorite white down jacket out of the closet and see that it’s no longer worth wearing... The down jacket itself is intact, intact, but The white fox collar has acquired an unpleasant yellow tint. You take off your collar with a sigh and decide that eventually you will have to buy new thing, in the meantime, you will wear it without the excellent addition in the past - the arctic fox trim. But don’t rush to throw the collar in the trash or cut it into fur scraps. The situation can be easily corrected.
At home fur collar can be painted using regular hair dye. And this procedure will not require much effort from you.
In this article we present step by step instructions for dyeing fur.
1. In order for the dye to penetrate smoothly into the structure of the fur, it is necessary before painting degrease and clean from dirt.
To do this, you need to prepare a special solution. We take:
- table salt – 3 teaspoons;
- ammonia – 1 teaspoon;
- any liquid detergent or shampoo for an animal – 1 teaspoon;
- baking soda – 2 teaspoons;
- water – 1 liter.
We treat the fur with the solution using a brush. Then it should be thoroughly rinsed and dried.
2. It is advisable to protect the inner, lint-free side of the collar from drying out before painting. To do this, it is lubricated with glycerin or any nourishing cream. Otherwise, your collar has a high chance of tearing.
3. Best option – dye the fur a shade darker than he was before. But if your paint contains bleaching agents, you can achieve the original color. Since the fur of the Arctic fox is much thicker than the hair on a person’s head, we recommend stocking up on more than one tube of paint.
4. Now you can start to dyeing the collar. We use paint according to the instructions. In order for the coloring matter to be distributed evenly, better fur pre-moisten with water. Work with gloves, apply the paint quickly, spread it over the fur with your hands - the main hair and undercoats should be thoroughly coated.
5. At the end of the dyeing time, rinse the fur generously with water. After this, rinse the collar in a vinegar solution. To rinse and add shine and volume to the fur, you can use hair conditioner instead of vinegar.
6. When our collar is rinsed, you should carefully dry it with a towel.
7. To prevent the collar from shrinking after dyeing, it must be dried on a flat surface, thoroughly straightened, stretched and pinned to the surface with needles. The collar should be dried with the fur facing up. The mesh will take the longest to dry, so before removing the fixing needles, make sure that the collar is dry on the mesh side.
Reusable plastic tableware
For the most part, the attitude towards plastic utensils is twofold...
Light in the house - creating comfort with lighting
Do we always know the reason for our bad mood or fatigue? By...
Caring for gloves - how to care for them at home
Gloves in our climate are an urgent need and a significant...
How to make a smokehouse for fish at home
A man who doesn't like to go fishing free time outdoors, big...
A fur product is purchased taking into account the fact that it will last for many years. Unfortunately, even expensive things can fade. The fur coat or vest itself is still in good condition, but it appearance leaves much to be desired. What to do with such a thing? A fur product that has lost its color should be dyed. That is why women need to figure out how to update their fur coat.
Having discovered their favorite fur coat without the original color, many ladies are very worried. Don't be upset, because the situation can be corrected, dyeing the fur. To cope with the task, you first need to decide on the color, and then on the painting method.
It is important to follow the painting instructions. If you don't do this, you can simply ruin your fur coat. In addition, it is worth remembering that before starting the painting process, the product is prepared.
Methods for dyeing fur
Modern means allow you to dye fur in any color.
Currently, there are four popular ways to dye a fur product, these include:
- Namaz method. The method involves applying paint using a brush or a bunch of feathers. Excess paint is removed by centrifugation.
- Fur gilding. A similar method involves bleaching the pile. It is best to use this method if you want to paint a raccoon, arctic fox, mink or fox.
- Dipping method. This is the most common method of dyeing fur coats. The product is completely immersed in paint and remains in place until it is painted.
- Combined method. In this way you can imitate the fur of a wild animal.
Regardless of the method chosen, the housewife must follow the instructions. Only consistent adherence to the steps will allow the product to be painted correctly.
You can create your own image
Coloring stages
Women who decide to dye a fur product should immediately understand that the dyeing process consists of several stages. If one of the steps is performed incorrectly or completely missed, the fur coat will not be painted accurately.
The painting process consists of preparation and painting. Each stage should be given Special attention. Only in this case can we hope for a positive result.
Fur cleaning
Despite the fact that you can dye a fur product yourself, you cannot immediately proceed to the dyeing process. You must first prepare your fur coat.
To do this, the fur product is cleaned of contamination. This can be done using an alkaline solution. To prepare the solution, you need to mix 3 teaspoons of table salt, 1 teaspoon of dishwashing detergent, 2 teaspoons baking soda, 1 teaspoon of ammonia solution with 1 liter. water. The resulting solution is applied to the fur product using brushes. After this, the product is washed and dried.
At the next stage of cleaning, it is necessary to process inner part fur. To do this, it is recommended to use glycerin or fatty cream. This treatment will protect the fur from drying out.
Coloring
Painting a fur product usually takes no more than 50 minutes. The owner just needs
Piece of art
decide on the method of painting the product. Some ladies prefer to dye their fur coats with hair dyes, while others prefer sprays for dyeing fur products. Each coloring method has its own characteristics.
Spray for painting fur
You can dye a fur product using a special spray. Thanks to this product, you can give color to long ends. The spray cannot stain the undercoat and undercoat.
When spraying, the can of paint must be kept at a distance of 65 centimeters from the fur coat. In this case, the can moves slowly, without sudden movements. If you make chaotic movements, the product will be painted unevenly. Immediately after dyeing, the fur is combed. This way, excess paint can be removed.
You can also use simple aerosol can. This method It may be cheaper, but more effective. It is also worth remembering that you do not need to paint the entire product, but only those places that have lost their original appearance.
The same case when both a fur coat and hair are dyed with hair dye
Paint for painting
The most popular way to dye fur is to use hair dyes. It should be noted that the dyeing process is carried out only on treated fur. When painting, you should pay attention to all layers of fur. Don't forget about the meat.
To distribute the paint evenly over the product, you need to knead the fur with your hands. The paint acts on the product for 40 minutes. After this, the fur must be held under running warm water. To consolidate the effect, the fur coat can be placed in brine for 10 minutes. When the dyeing process is completed, the fur coat must be dried by laying it on a horizontal surface.
How to dye arctic fox fur at home
Some women are interested in the question of how to dye a fur coat at home if it is made from Arctic fox? Like any other fur, the Arctic fox must first be processed. It should be noted that it is better to paint the white Arctic fox in light colors. If desired, dark furs can be dyed in light colors, but then they will first need to be decolorize with hydrogen peroxide.
Before you start dyeing, you need to test the fur. To do this, a little paint is applied to the pile of the product. If nothing serious happens to it, you can start painting.
It is best to buy 2 more packs of paint. You should paint your fur coat with a brush, after wearing rubber gloves. After painting, warm water is poured onto the product. The last stage painting is drying. The product is placed on a horizontal surface away from heating devices.
How to dye mink fur at home
Many women are interested in the question of how to dye mink fur? In fact, there is nothing complicated. To dye mink, you can use both hair dye and sprays. If paint is used, then it can be applied to the product with a brush or toothbrush. You can evenly distribute the paint with your hands. After 40 minutes, the paint must be washed off under the pressure of warm water.
Drying is carried out in the same way as when painting other things. A mink vest or fur coat is stretched on a horizontal surface, away from heating appliances. You can use a hair dryer for quick drying. However, remember that first of all, you should dye fur precisely in order to return the product to its original appearance, and not to change it.
Almost every woman has a fur item in her wardrobe. During prolonged wear, natural fur loses its attractiveness and becomes faded. Some fashionistas dream of changing the color, making it more fashionable and bright. It is quite possible to dye fur at home, the main thing is to adhere to the basic rules given below.
Preparing for coloring
Before you begin the dyeing process, you need to clean the item. This will allow you to paint the product evenly without leaving pale areas on it. A solution prepared from the following ingredients will allow you to carry out this procedure well:
- salt (2 tbsp);
- ammonia (1 tbsp);
- baking soda (2 tablespoons);
- washing powder (1 tbsp);
- warm water in the amount of two liters.
The components are thoroughly mixed, then the mixture is applied to the fur with a brush, evenly distributing it over the entire surface. For effective cleaning, use a damp cloth or clean cloth to rinse the soap solution several times. In order for the core (skin) on the back side of the product not to shrink, it must be moist, so it should be wetted.
Interesting! You can clean the item with regular shampoo intended for hair or dishwashing detergent.
Some use aggressive substances: kerosene or lighter refill. With this method, you must always remember that their use can significantly worsen the appearance of the products.
Dry a fur collar or fur coat on hangers in natural conditions, away from heating devices and sunlight, on the street or in a room with good ventilation.
Types of fur
Before you paint this or that thing at home, you need to understand the characteristics of the material. Only in this case can you achieve the desired result and get the desired color or shade. The easiest items to dye are those made from rabbit, mink, and chinchilla. But the procedure should be carried out carefully, since these materials, especially rabbit fur, are highly sensitive to chemicals.
Important! Dyeing thick fur will require a lot of paint and time. But the result will please the owner of the wardrobe item good color, which will last for quite a long time.
If the fur coat is made from beaver, you should not even try to lighten it, as it will acquire a yellow tint. The muskrat can behave very unpredictably, since not everyone may like the pinkish shades with whitish areas. After some time, the paint will fade and the product will take on a completely different appearance.
Arctic fox coloring
You can paint the arctic fox product in specialized workshops. The cost of such a service is quite high, and not every person can afford to pay a certain amount. There is a way out - you can perform the procedure at home yourself. To do this you need to do the following:
- Choose suitable paint. It is sold in hardware stores. If you can’t find a suitable color, there is another option - dyeing the fur at home with hair dye. Similar dyes are sold in large quantities. color palette: black, red, golden, brown, red and other shades, choosing will not be a problem.
- Strictly following the instructions, dilute the dye.
- Put a mask or respirator on your face and gloves on your hands.
- It is recommended to treat the flesh with Vaseline, baby cream or glycerin. This will prevent the skin from getting too wet and protect it from drying out.
- Dyeing can be done on both wet and dry arctic fox fur. In the first case, the paint lays on the surface quite softly. Apply the substance quickly using a hairdressing brush. This should be done carefully so that there are no unpainted areas left.
- If you want to get a leopard color, use a stencil and several colored paints. Holes of different diameters are cut out of thick cardboard, applied to the surface of the product and painted with black and brown paints.
- The Arctic fox can get a beautiful, rich shade if only the ends of the pile are painted. Typically, light-colored coloring compounds are used for this.
- You can refresh a fur wardrobe item with a spray, painting only the ends. You need to purchase paint intended for suede, which comes in an aerosol. Holding the can at a great distance, you need to make uniform movements. This is a simple and fast way.
After completing the procedure, the arctic fox fur is left for several minutes to obtain the desired shade. The time is indicated on the package. Now you should treat the product by preparing the following solution: dilute 5 tbsp in 2 liters of water. spoons of vinegar. As soon as it is ready, immerse the item in it.
Vinegar perfectly fixes the color, gives the fur additional shine and softness, significantly improving the appearance of a fox fur coat or collar. To prevent the item from becoming deformed, the flesh is stretched on the table, secured with clothespins.
To give the Arctic fox a lighter tone, use a hair lightener, which is diluted in accordance with the instructions. You can use hydrogen peroxide, diluting it with water in a ratio of 1 to 3. The prepared product is applied to the product and left for no more than 15-20 minutes, otherwise the villi will become brittle. After the time has passed, the fur is rinsed and sent to dry.
Dyeing a mink coat
Faded mink fur spoils the appearance of a fur coat. In order to restore color and shine, a simple procedure is performed - painting a mink coat. It is necessary to purchase in advance the desired shade of paint, a spray bottle, a comb with thick teeth, rich cream or glycerin, shampoo and hair conditioner. Now you need to do the following steps:
- clean the item from dust, dirt, grease;
- treat the skin (inner space) with a greasy substance;
- prepare the coloring composition in accordance with the instructions;
- moisten the surface of the product;
- apply a dye to the pile using a spray bottle;
- comb hairs;
- wash off the paint with shampoo diluted with water;
- treat the surface with balm.
The procedure is completed, all that remains is to dry the product, after applying the cream to the inside and combing the hairs.
In the same way you can dye silver fox fur, products made from mouton and any other material. For the silver fox, they usually choose black or black paint. Brown. For a mouton fur coat, dark reddish shades and chestnut color are best suited.
Dyeing a fur collar
It is not always necessary to completely paint an item. In some cases, it is enough to dye a fur collar at home. This is quite easy to do using regular hair dye. First, the collar is cleaned of dust and dirt, dried, and then the dyeing process begins:
- Using the instructions, you need to dilute the paint.
- For uniform coloring, the collar is slightly moistened with water.
- The coloring composition is applied by hand (you should first put on gloves). The process should be done quickly, distributing the paint well throughout the pile.
After completing the procedure, the collar is washed well with water and rinsed in a vinegar solution or hair conditioner. It should be dried on a flat surface, stretched and pinned to the base with needles.
Artificial fur
Some people prefer to buy faux fur products. In many characteristics it is not inferior to natural raw materials and sometimes even surpasses them. It can also be colored using hair dye. First you need to select the tone of the dye, clean the product, removing dirt, dust, and grease from it, using a soap solution. After this, remove the remaining soap solution with a damp swab.
Treatment should be carried out one day before staining.
However, you should know that faux fur is dyed in dark colors. You should buy high-quality paint, so as not to spoil the thing.
The coloring composition is obtained by strictly following the instructions. After this, it is applied to the artificial fur with a brush, making movements in the direction of the pile, evenly distributing it. The brush should be pressed so that it touches the fabric base. The paint is left for the time recommended in the instructions, then the material is washed with water, and if necessary, excess paint is removed with cotton swabs. After this, the still damp fibers are combed with a sparse comb and the product is sent to dry.
The fur fades in the sun. Precipitation also affects its brightness. As a result, even the most expensive and high-quality fur coat begins to look shabby and old over time. Painting will help get rid of signs of wear.
First, clean the fur: comb it, remove dust and other small debris. If you do not do this, foreign particles will not allow the paint to lay down evenly. Then choose the product you will work with. Remember that even the most durable options will only maintain a given color for 1 season. By the time the next one begins, there will be no trace left of the painting.
How can you dye fur?
Most often, housewives turn to either professional dyes designed for use on fur products, or regular hair dye. The latter will have to be purchased from large quantities. Especially if the pile is long, thick, and the fur coat is not a shortened model.
Also It is definitely worth conducting a compatibility test. Apply the purchased dye to an inconspicuous area of fur. Follow the allotted time. Rinse it off. Wait a couple of days. If nothing bad happens to the item during this period and you are satisfied with the resulting shade, proceed with full-scale painting.
What is needed for the job?
List of items and materials that will be needed in the process:
- salt, soda;
- glycerin, ammonia;
- specialized product for washing fur items;
- water.
Self-painting algorithm
So, you need:
Before applying some types of paint, you will have to wet the fur. Just spray some water from a spray bottle.
Important nuances
When applying, try to cover all areas, don't miss anything, but move quickly. Otherwise, one part of the product will be painted better than the other. This will happen due to the different duration of exposure to pigments. If you have problems with the speed of completing tasks or have no experience, you should resort to a spray gun. Just don't bring it too close to the item of clothing. You need to spray from a distance (about 50 cm).
Important! If you use specialized paint sold in cans, you should spray it from a distance of 60–70 cm.
After application is complete, let the paint sit for the required time. The waiting time depends on the active dyes, but usually the instructions say 30–45 minutes. After the allotted time has passed, rinse the fur coat in a vinegar solution and blot the pile with paper towels. This will remove any remaining paint.
Squeezing by hand, twisting, running sponges over the product, or performing other manipulations aimed at speedy drying is prohibited. For this purpose, you can only use napkins.
The next step is optional, but recommended. Experienced housewives advise immediately after removing any remaining dye, apply a mask for colored hair to the undercoat. The best products are professional products that not only protect the color from being washed off, but also take care of the hair structure. Their effect will be noticeable within 2–5 minutes. After this time, rinse the clothes again.
How to dry it properly?
After all the work, the fur coat is placed on wide hangers that fit perfectly in size. It is also worth paying attention to what material the item is made of. Thin steel simply cannot withstand it and will bend from the weight of a damp fur coat, if it is, say, mink or sable fur. That is, there is no point in relying on the fact that the hanger has never been deformed under a fur item before, because up to this point the outerwear has always been dry.
Best option: durable wooden hangers. Place them together with a short fur coat in a warm room. Try to ensure that heating devices, if they are working, are as far away from the fur as possible. If you don’t have good hangers at hand, you can resort to another drying method.
Algorithm of actions:
- let the water drain;
- apply glycerin and set the direction of the pile, if necessary;
- fold in half;
- place on a hard, flat surface (fur should be on top);
- place a well-absorbent cloth;
- Periodically replace the absorbent cloth with a dry one.
At first you will have to do this every 1.5-2 hours, then the duration of the break will begin to increase. In general, drying a fur coat takes from 3 to 5 days. During this time, experts recommend combing the product and inspecting its undercoat for strange changes.
If bald spots, deformation or other defects appear, immediately seek help from a dry cleaner. Perhaps the fur can still be saved.
What is your assessment of this material?