Almost every sailor knows what a noose knot is and how to properly tie the strongest knots. With the help of a simple but reliable knot, you can lift various heavy things, tie together several things and, if necessary, save a person’s life.
In other words, nodes are necessary for a person in his everyday life. Knots are used both for fastening very thin threads and for fastening thick ropes, which include many thin threads. At the same time, the scope of application of these units is not limited.
This knot is also called a slip knot. This is a kind of open loop that is very often used to catch animals. Another advantage of the noose is that it is easy to loosen and untie after use.
There are several types of nooses:
- A straight knot is the strongest connection. It is used on strong ropes or ropes. Its advantage is that when wet the knot only becomes stronger. If great strength of the knot is not required, then you need to insert the wooden piece directly into the knot.
- The flat knot is more suitable for connecting ropes and other strong materials. The knot provides the highest connection strength.
- The fisherman's knot is also designed to connect several elements.
Each type of noose can be formed by yourself. To do this, it is enough to have thick ropes. Very often, fishermen use such knots in their practice.
Using a noose in fishing
What are knots, such as a noose, intended for:
- Such a noose allows you to create additional thickness from ordinary rope. This allows you to increase the strength of the connection.
- With the help of a noose, you can securely tie several things together and transport them without any problems.
- The noose allows you to lift the load very simply and quickly. As the load on the connection increases, the knot is tightened even more.
- The noose is used to lift heavy objects when it is difficult to lift them in the usual way.
- Using a noose, you can tie several ropes without problems with the strength of the connection. At the same time, such a knot can be easily untied, if necessary.
- A noose allows you to form a separate loop on a rope, or rather, the technology of knitting a noose.
- This unit can always provide backup in any conditions.
People are quite inventive and have adapted various units to make their lives easier.
To do this, it will take a minimum of time:
- First you need to prepare the ropes, focusing on reliability. It is better if it is a rope or other strong rope. It all depends on the weight of the load being lifted. If there is no rope, then you can form a rope yourself by taking several ordinary ropes and twisting them in a spiral, in the form of a rope.
- The rope or rope is folded in half to create one long end and one short end.
- A small loop is formed at the short end.
- After this, the long end is threaded completely through this loop.
- If necessary, you can easily loosen the knot and make a loop of any size.
- Finally, by pulling the end, the loop is tightened.
This is one of the most primitive units, although it has maximum reliability. Fishermen use this unit to move loads. The size of the loop can vary depending on the size of the load, which makes this loop the most versatile.
Everyone knows that such a loop is considered the strongest nodal connection. The use of a scaffold loop led to quick death, since it instantly broke the cervical vertebrae. Therefore, the most unpleasant memories are associated with the history of this loop.
Despite the complexity of this loop, it can be mastered in a short period of time. To do this you need:
- Choose the material yourself high quality and strength so that it can withstand heavy loads.
- The ropes are connected into one whole and folded in half.
- As a result, you can see two ends: one long and the other short.
- A loop of a suitable size should be formed at the long end and secured with a simple knot. If it is difficult to determine the size of the loop, it is better to tie the object with a rope. After this, the rope is released and you can see a free loop of the desired size.
- The connection is secured with the short end of a rope or rope.
The noose is ready for use. If there are doubts about the use of such a unit, its reliability should be checked at home. To do this, you need to find a suitable object and, having secured a rope to it with a “noose”, try to move this object. If the knot does not untie or even loosen, which is hardly possible, then it can be successfully used for fishing.
Another of the most common and reliable units is the carbine noose. This connection cannot be classified as popular, since this knot is not so easy to tie, especially for beginners. In addition, the carabiner loop has a highly specialized purpose, as it was often used by climbers.
Despite this, such fastening is used quite often, especially in cases where constant tightening of connections is required. If you need to pull a car out of a hole, then best option, than a carbine noose you can’t imagine.
How to knit a carbine noose:
- Purchase the necessary material: rope or rope.
- From the rope you need to form a connection point that looks like a figure eight. To begin with, you can wrap the rope in a figure eight between two objects and remove it. Stumps can be used to create larger loops.
- A carabiner is attached to one of the ends, and along with it the rope is tied to the tree.
- If everything is done correctly, the carabiner should connect securely to the end of the rope.
- After this, the auxiliary rope is taken and pulled, after which the knot is tightly tightened.
A fairly large load can be attached to such a mount. Quite often, fishermen secure their boats using such fastenings. Even with the strongest force, the carabiner will only be able to slide along the free end.
This is a knot, as they say, for all occasions. This node is used by fishermen and sailors, as well as tourists. The support can be any object or a wet rope. Knotting technique:
- A rope is attached to the support.
- After this, a loop of three turns is formed.
- The short end makes 3 turns around the support.
- After this, an auxiliary rope is pulled up.
- Finally, the node is freed from its support.
Such nodes can slip, so each time you need to check the connection for strength.
Safety precautions
- You should be very careful while tying knots, otherwise you may get injured. A strong rope consists of many thin fibers that can cut your hands with a certain amount of force. This is especially true at the stage of tightening knots, since serious effort is required.
- Before lifting large loads, you need to make sure that the rope meets the required strength. In any case, it is better to play it safe and take a rope with a certain margin of safety.
- Under no circumstances should such knots be used when bandaging body parts. This can cause blood flow to stop, causing unexpected results. In this case, one should take into account the fact that the noose is prone to self-tightening.
- The main thing is to warn, although today there are no cases where a noose actually harmed a person, except for the scaffold noose. But the fact that the noose is a fairly reliable connection and very easy to manufacture means that most fishermen use the noose when they need to securely and quickly secure any objects.
It is impossible to underestimate the importance of various cords, strings of twine or ropes in the life of mankind. Any civilization used them in its activities: the production of boats and ships, the manufacture of fishing gear, lifting weights to great heights, weaving fabric and wall hangings.
In the history of mankind, various knots played a very important role and were used in medicine, religion, and endowed the owner with magical properties. It is known that the Mayans used nodes for various mathematical calculations, and the peoples of the New World used them to transmit messages to long distances, while the knot served as a protective amulet for its owner in the lands of other tribes. Children are well aware of the “rope” game, when they use a knotted rope to create fancy patterns or shapes by changing the position of their fingers.
Knot as achievement of progress
The development of progress helped mankind to achieve significant development in the manufacture of strong materials used for ropes and ropes, and thousand-year history preserved many ways to create reliable nodes. Such achievements did not sink into oblivion without a trace and made it possible to expand the horizon in the development of shipbuilding, aeronautics, cartography, and various crafts. Weaving knots marked the beginning of the development of many types of needlework: macrame, tatting, lace weaving, beading and chain knitting.
Penelope and the art of weaving
It is enough to recall Homer’s famous poem “The Odyssey” to understand the enormous importance the manufacture of clothing had on the consciousness of people in ancient times. Penelope showed wisdom and cunning to gain time and wait for the return of her husband Odysseus, the king of the island of Ithaca. She waited for her husband for 20 years, remaining faithful to him, but pursued by annoying suitors, she decided on a trick to avoid remarriage. She was famous for her art of weaving, so she announced that she would choose a husband only when she made a funeral shroud for her father-in-law, Laertes, the father of Odysseus. For three years, she deceived suitors at her loom: every day she wove cloth, and at night she unraveled it in order to start work all over again in the morning. Would she have been able to do this if she did not know how to tie a weaving knot and unravel it? Of course not. She reached a high level of skill and knew many techniques for connecting threads into weaving knots so that she could simply unravel the fabric at night.
Fabric making
Making knots played a special role in the development of the art of fabric making. Weaving is a long process of creating fabric by weaving two sets of fibers or yarns at right angles to each other. It originated in the Neolithic era, at the time of the advent of agriculture and the domestication of animals. The creation of textile looms is as old as civilization itself, and their use is still practiced throughout the world. Obviously, the ability to make thin thread became the starting point for the development of weaving, spinning and sewing. Early looms have a very simple construction of sticks and poles driven into the ground. Warp threads were tied vertically onto sticks, and the weaver wound the threads horizontally - along the weft. Similar machines are still used among the Bedouins of the Middle East.
Weaving knots are very varied and there are several ways to make them. They are used everywhere, including in other crafts, when it is necessary to tie two threads together when they break. Let's look at several ways to tie a weaving knot, which can also be used in other techniques of women's needlework.
Straight knot
The straight knot is a fundamental knot for tying two strands together. The simplest application is tying shoelaces or a knot on a box. It is done very quickly and simply, but does not have sufficient strength when the thread is pulled. The binding thread begins with half a knot, which is the first part of a straight knot. It is commonly used in macrame techniques and ties the beginning and end of the thread together.
Weaving knot: method one
You can use this method when you need to join two threads, but the end of one thread is very short.
Make an adjustable knot in the long thread, it will become the main working thread after joining. Pass the short end from the main knitting into the resulting loop 3/8 of the remaining length. Pull the remaining tail and the end of the warp thread as far apart as possible (in opposite directions), this will tighten the knot.
Tighten the end of the thread, keeping the edge of the short thread between the large and index fingers one hand. Pull the remaining end through the warp thread on the other side.
It can be released or unraveled in the same way as any other weaving knot. The node execution diagram is shown in the figure.
One more point is worth noting. If such weaving knots are made for the first time, then the adjustable knot on the main thread may turn out to be too tight, so it is worth first practicing tying it in a different way.
Weaving knot: method two
Knowing how to tie a weaver's knot is very useful. Obviously, these skills can help in many areas of life. Especially if you need to get a very small and thin, almost invisible knot for tying threads. The weaving knot has some special features - it is light and easy to use, does not slip, and the quick connection was appreciated not only by weavers, but also by sailors and climbers.
This knot can be used when you need to join two threads together or secure one end of a thread to a part of the loom. It cannot be performed under thread tension, but it is indispensable for correcting the deformation of the fabric when there is sagging in the working thread. The knot connects any threads, including those with very short tails. The exception is sliding threads - silk, viscose.
It takes a little more time to complete than a direct knot, but when done this way it is safer to operate and smaller in size. In the case where a direct node does not represent a reliable connection, try this method or double weaving knot.
There are several names that are associated with weaving knots, such as bowline or clew knot. This weaving knot is very widely used in knitting, when it is necessary to reliably join two threads of cotton, linen or wool yarn. The connection is very good and strong, thanks to the low hairiness of the thread.
Double weaving knot
This method is used if the use of smooth yarn does not allow reliable fastening of the threads with a conventional weaving knot. However, do not forget that on very slippery yarn, even such a knot will not create a reliable connection between the two threads.
A double weaving knot is a regular knot with an extra step added. One way to create it is to start, as described in method No. 1, using the "bunny ears" method. Once you have managed to thread the thread between the “ears”, loop it again around the right loop. Complete the last step: remove right hand"eye" down under the thumb, tighten by pulling the right end of the working thread.
How to untie a weaving knot?
Untying a weaving knot will help you determine if it is tied correctly. To do this, you need to straighten the main thread. Then the second one forms a complete knot in the shape of the letter U. Regardless of how the threads are tied, one of them will form a U-shape, and the second will wrap around the first. Pull both ends in opposite directions, this will help straighten the thread even in the deformed area, and the knot will slip off and there will be two free threads. Weaving knots were created to quickly connect a broken thread with another skein, but if the connection was incorrect, they unraveled just as quickly.
Weaving knot in tourism development
The development of tourism marked the beginning of a new round in the creation of hubs for activities such as mountaineering, rock climbing and caving. Special equipment and fastening methods play a significant role during exploration, long descents or human rescue. The generally recognized reliability of weaving knots, which ensures high-quality fastening around any object, and the simplicity and speed of execution makes them indispensable assistants in critical situations.
I came across Safronenko’s brochure “Learning to Tie Knots.” It may be useful for others to read this material.
For orientation in the description of the nodes, they are used in accordance with Fig. 1, the following terms: root end - the end of the cable, fixedly fixed or used when tying a knot; opposite to the running end; running end - the loose free end of the cable, which begins movement when tying a knot; loop (open) - the running (or root) end of the cable, bent twice in such a way that it does not intersect with itself; pebble (closed loop) - a loop made by the running or root end of the cable so that the cable crosses itself; half-knot - a single overlap of two different ends of the same cable or two ends of different cables; carryover - a rope wrapping around an object (a log, a pole, another cable, a ring, etc.), made in such a way that both ends of the cable do not intersect; hose - a full turn (360°) of a rope around an object, made so that after this the end of the rope is directed in the opposite direction; half-bayonet - carrying around an object with a cable, followed by the cable crossing its end at a right angle, without passing it into the resulting closed loop.
KNOTS FOR THICKENING THE ROPE “Simple knot” (Fig. 1). This is the simplest of all known knots. To tie it, you need to make a half-knot with the running end of the cable at its root end. It can be tied at the end or in the middle of the rope. To do this, the running end of the cable is carried once around its root part and passed into the resulting loop. Depending on how it is tied, a simple knot can be left (Fig. 2, a) or right (Fig. 2, b). . This is not only the simplest of all knots, but also the smallest in size. When the cable is pulled, it becomes so tight that it is sometimes very difficult to untie it. One more negative feature for plant cables should be taken into account - this knot, like no other, spoils the cable, as it bends it greatly and weakens its strength by about half. A simple knot is used to tie at the end of a thread so that it does not slip out of the fabric, to prevent the rope from unraveling, and also as an additional knot; for example, at the ends of sheets tied together to serve as a rope in a fire. A simple knot, despite its primitiveness and ability to tighten tightly, is an integral element of many useful knots. "Eight" (Fig. 2-2). This knot is considered a classic - it forms the basis of many other, more complex knots for various purposes. It can serve as an excellent stopper at the end of a thread, rope, or cable. Even with strong traction, unlike a simple knot, it does not damage the cable, and it can always be easily untied. In everyday life, the “eight” is widely used. It is very convenient for securing a cable passing through a hole in an object, for example, in the wooden handle of an outboard motor rope starter. Two “figure eights” can be used to securely attach the rope to a children’s sled. To prevent your hand from slipping off the end of the dog leash, you can use a figure eight. It also serves well for attaching strings to the pegs of violins, guitars, mandolins, balalaikas and others. musical instruments. “Stevedoring knot” (Fig. 2-3). Like the figure eight, this knot is a stopper for cables passing through the hole. It is knitted like a figure eight, but with the only difference that the running end is inserted into the loop after it has been looped around the root end of the cable twice. When tightening this knot, you must ensure that the hoses at the root end do not twist and slip into the loop. A tight stevedoring knot is easier to untie if you pull the loop that is closer to the root end. “Oyster knot” (Fig. 2-4). Due to its symmetry, this knot is successfully used by musicians to fasten strings on the pegs of a violin, mandolin and other musical instruments. In size, the tightened oyster knot is much larger than the “eight”, and therefore it is used in cases where the holes on the pegs are, for some reason, larger than needed for a particular string. This knot has one peculiarity of tying: it is tightened in two steps. First, tie a running simple knot (see Figure 8-52 below) and tighten it. Having passed the running end of the cable into the loop, tighten the knot again. If the oyster knot is tightened in one step, it will not form correctly. In Fig. 2, c shows a diagram of an oyster knot, indicating its symmetry. In this form, it can serve as a good decorative ornamental knot. "Ufer knot" (Fig. 2-5). This vintage one sea knot can be tied in two ways. The first method (Fig. 2-5, a) is based on a simple knot and involves inserting the running end into the loop from below between the main and running ends and then passing it underneath. The second method of knitting (Fig. 2-5, b) involves tying a figure eight and pulling both ends into its corresponding loops. The peculiarity of the knot is that it is relatively easy to untie even if it is tightly tightened. "Multiple Eight" (Fig. 2-6). If there is a need to temporarily shorten the cable or exclude an unreliable part of its length from work (in case of fear that it will break), it is best to use the “multiple figure eight”, which can also serve as a convenient handle for both large and small object (cardboard box, bale, old suitcase). If you tie a “multiple figure of eight” in the middle of the rope of a children’s sled, you will get a very good handle, but it is better to fasten the free ends of the rope to the sled with a simple “figure of eight”. “Multiple Eight” is a convenient handle on the end of a dog leash. To make the knot even and tight, as you tie each full turn, tighten it and move it towards the previous one. If you later need to use the entire length of the cable, the “multiple figure eight” is easy to untie. No matter how tightly it is tightened, it will not damage the cable. The “fire escape” (Fig. 2-7) consists of a series of simple knots that are knitted very quickly one after another (20 knots can be tied in half a minute). It is magnificent in its simplicity and effectiveness, but requires a certain skill and precision in execution. Knitting this knot begins with the formation of a certain number of closed loops (pegs) wound behind each other. Take in left hand the running end of the cable, departing 15-20 cm from its edge. Make the first pebble with a diameter of no more than 10 cm so that the root end of the cable is at the bottom. Then make the same pin and press the thumb of your left hand to the tips of the others. In exactly the same way, make 5-7 pegs, evenly laid one on top of the other. To prevent them from moving out and getting tangled, place them on the outstretched fingers (except the thumb) of your left hand. You will get a kind of rope “cup” "Carefully remove it from your fingers so that it does not crumble or flatten. Now pass the running end, which you held in your left hand, inside this “cup” and bring it out on the other side. on left palm and grasp it on all sides with five fingers. Hold the top edge of the “cup” with the bent fingertips of your right hand and slowly, without jerking, pull the running end of the cable sticking out of the “cup” upward. As this running end is pulled out, simple knots will be tied on it. Their number will correspond to the number of pegs made, and the distance between them will correspond to the length of their circumference. Knots can be quickly tied by attaching one end of the rope to a radiator or to the leg of a bed (chair), throw the other end out the window and, if necessary, go down the rope. Such a “ladder” can help a person who has fallen overboard a ship. It is convenient for several people to pull out a car stuck in the mud. To make it easier to pull, tie a “fire escape” on the ground so that the knots go approximately every meter.
TIGHTENING KNOTS “Self-tightening knot” (Fig. 4-18). This primitive knot is perhaps the most original. A force commensurate with the strength of the cable can be applied to the root part of this unit, and it will hold securely. The greater the thrust, the more strongly the free running end is pressed by the hose, and the knot tightens itself. But it is only reliable when tied around a log and constant force is applied to the root end. If the force is applied to the cable alternately, in jerks, then the running end may slip out from under the root end of the cable. A self-tightening knot can be used in cases where the suspended load is motionless and the direction of traction to the root end does not change. It is convenient for them to hang bags of food on the crossbar in warehouses to save them from rodents. By releasing the running end of the cable, the suspended bag can be smoothly lowered. “Self-tightening knot with half bayonet” (Fig. 4-19). By adding one or two half bayonets to a self-tightening knot, we get more reliable node, which can be used for various needs. “Whiteout knot” (Fig. 4-20). This knot consists of two half-bayonets tied in the same direction. There are two ways to tie it. The first method is used in cases where one of the ends of the object around which the knot is knitted is open and accessible (Fig. 4-20, a), the second when the cable has to be carried directly around the object (Fig. 4-20, b) . Using a knot, you can attach a rope to a smooth post or crossbar, tie a bag, pull a rope between two posts, tie a string to a bow, moor a boat to a pile or stake dug on the shore, attach twine to a thick cable. It is very convenient for feeding a tool to a height (for example, a hammer). When weaving many types of fishing nets, bleached knots form the first row of knitting. However, when using a tapping knot, you should always remember that it is reliable only with a constant pull on the cable or rope. “Retractable bayonet” (Fig. 4-21). This unit is more advanced and more reliable than the bleached one. It can also be used in cases where the direction of pull of the cable is at an acute angle to the log or cable to which it is attached. The retractable bayonet holds even when the thrust is directed almost along the br?v-.^a. Unlike a tapping knot, a sliding bayonet has not two, but three hoses enclosing the object; one on one side of the root end and two on the other. When tying this knot, it is necessary to take into account which direction the pull behind the root will be directed end, and depending on this, tie a knot. It’s easy to remember: on which side is the pull - there are two hoses. When using a sliding bayonet, do not forget that it is reliable only under load and does not like sharp weakening (Fig. 4). -22). The knot, known throughout the world by this name, which in Latin means “boa constrictor,” is one of the most tightly tightened knots. At the same time, it is also considered one of the most difficult to untie. Well, they don’t even untie it, it only serves once. The constrictor tightens well on round ones that don’t have one. sharp corners objects; in this case it is irreplaceable. This is a very useful and important node. With its help, you can, for example, tie a bag very tightly, the valve of a soccer ball, compress a leaking rubber hose, tighten a carpet, a bag, a wadded blanket from above, tie the hands of a bully, apply a tourniquet to a wounded limb, and much more. . “Double constrictor” (Fig. 4-23). This knot is more complex than the previous one and tightens even more. "Python knot" (Fig. 4-24). It is similar in principle to a constrictor. It can be used, except in cases like a constrictor, and for connecting two transverse slats (Fig. 4-24, b). Their connection using this knot will be much stronger than with nails. They can be used to tie the wooden slats of a kite, and when constructing a wicker fence, tie one rope to another at a right angle. “Blind loop” (Fig. 4-25). This knot is also called a tag knot, as it is very convenient to use for tying keys together, for storing washers and other items that have a hole, and also for tightening the neck of a bag when tying it. "Stop Knot" (Fig. 4-26). Sometimes there is a need to hold a cable under tension. This is done with the help of another cable, attached with a stopper knot to the cable that needs to be held. If the pull of the cable that needs to be stopped is to the right, then the running end of the stop cable is placed on top of the cable with the hose to the left, then another hose is made and the running end of the stop cable is led towards the first and second hoses, into their clamp, and then to the right around wrap the cable around it, making one or two more hoses, and in two or three places they put strong grips or secure them “under themselves”. “Swing knot” (Fig. 4-27). If you decide to make a swing at your dacha or in the yard of your house, then don’t look for a better unit. “Noose with half bayonets” (Fig. 4-28). This knot, proven by centuries of experience at sea, has long been used on the shore. It is reliable and very strong, it tightens exceptionally tightly around the object, but when the pull on the cable stops, it is very easy and simple to untie it. The noose with half bayonets is widely used by lumberjacks. On many foreign languages it is called a “forest knot” or “log knot”. To lift a heavy log or pipe, instead of special rigging devices, you can use a vegetable or steel cable of appropriate strength. But for this you need to know how to tie a knot correctly. It should always be knitted slightly away from the middle of the log (pipe). Having removed the running end of the cable from the loop that makes up the knot, it is pulled towards the end of the object being lifted, from which the pull will be, and two half-bayonets are made. But, as a rule, two half-bayonets are made before the start of tying the noose, since the root end of the tackle is already attached to the lifting mechanism. The slack of the cable between the noose and the half-bayonets must be selected before lifting. Having lifted an object with a crane, it is better to deliver it to its place in one go, without lowering it to the ground. You should always remember that this unit must be checked before each lift (if it is carried out in two steps). It is also important in which direction to make half-bayonets on the log. They should be laid along the descent of the cable. Lifting heavy objects with a noose without half bayonets is considered dangerous.
NON-TIGHTENED KNOTS “Simple half bayonet” (Fig. 3-8). It is the simplest of the non-tightening knots and is widely used - it serves as the final element of many knots. A tied half-bayonet with a running end attached with a grip reliably withstands strong traction. He may move towards the object, but he will never be drawn in. “Simple bayonet” (Fig. 3-9). Two identical half-bayonets make up a knot, which is called a simple bayonet. This non-tightening knot is one of the simplest and most reliable knots for fastening. For a correctly tied bayonet, its running end, both after the first and after the second pegs, should extend equally above or below its end. With an inverted, that is, incorrectly tied bayonet, the running end after the second peg goes in the opposite direction, not in the same way as after the first. If the half bayonets of a simple bayonet are made in different directions, then when the cable is tensioned they will come together and the knot will be tightened. You should not throw more than three half-bayonets in such a knot, since this is quite enough and the strength of the knot as a whole will not increase with a larger number of half-bayonets. This simple but reliable unit can be used in all cases when the cable needs to be temporarily attached to an object for strong traction, for example, to a hook when towing a car. “Bed bayonet” (Fig. 3-10). This non-tightening knot holds securely even with strong pitching, and if necessary, it can be easily and quickly untied. “A simple bayonet with a hose” (Fig. 3-11). This knot differs from a simple bayonet by one additional hose around the object to which the cable is attached. Two hoses around the object make this knot more reliable under long-term loads - due to the additional hose, it will not fray as quickly as a simple bayonet. “A simple bayonet with two shlags” (Fig. 3-12). It differs from the previous knot by an additional, third hose, which increases the strength and reliability of the knot if the cable is under constant pressure. “Bayonet with drift” (Fig. 3-13). It is more symmetrical than a simple bayonet with two hooks, and in the event of a change in the direction of thrust, it moves less along the object to which it is tied. To tie a bayonet with a bow, you first need to make one hose around the object with the running end, wrap it around the back of the root end and make a hose again, but in the other direction. After this, you should make one or two half-bayonets. “Reverse bayonet” (Fig. 3-14). A situation often arises when the running end of the cable is enclosed around an object (logs, etc.) p.) very difficult. Using a reverse bayonet, you can loop the cable around the desired object once and at the same time tie a knot with two hoops around the object to which you are attaching the cable. To do this, the running end of the cable must be folded at a length of 2-3m in half and, looping it around the object, pull the loops towards you. Now the running end of the cable needs to be threaded into this loop, and the slack should be taken out at the root end and the knot should be finished with two half-bayonets. “Fisherman's bayonet” (“anchor knot”) (Fig. 3-15) Recognized by sailors of all countries as the most reliable for attaching a rope. It can be used in all cases when working with cables when they are subject to strong traction. "Mast bayonet" (Fig. 3-16). First, a bleached knot is tied around the object to which the cable is attached (see; Fig. 4-20) and a simple bayonet is made at the root end of the cable - a reliable and simple knot is obtained. To prevent the mast knot from becoming too tight, the first knot is not fully tightened. "Port node" (Fig. 3-17). First, near the bollard you need to make several hoses with the running end of the mooring cable. After this, fold the running end in half and in this form, in a loop, pass it under the tensioned root part of the cable, turn the loop 360° and throw it on top of the cabinet. This knot does not slip and holds securely. The cable can be released at any time, even if it is under strong tension. To do this, you need to slightly select the running end passing under the root end and enlarge the loop, after which it will not be difficult to throw it off the stand.
KNOTS FOR LINKING TWO CABLES “Oak knot” (Fig. 5-29). Its positive qualities are the speed at which it can be tied and its reliability. It is used only in exceptional cases, when there is a need to very quickly connect two cables. When connecting plant cables, the connection has a significant drawback: a tightly tied knot is very difficult to untie later, especially if it gets wet. In addition, a cable tied with such a knot has less strength and during operation creates a danger of getting caught on something during its movement. To connect two cables, their ends need to be folded lengthwise together and, stepping back from the edges 15-20 cm, tie both ends as one whole with a simple knot. Do not try to tie synthetic cables and fishing line with this knot: it crawls on them. "Flemish Knot" (Fig. 5-30). This is one of the oldest maritime knots, which was used to connect two both thin and thick cables. In fact, this is the same figure eight, tied at both ends. First, make a figure eight at the end of one of the cables being tied (see Figure 2-2). Insert the running end of the second cable towards the exit of the running end and repeat the figure eight tied to the first cable. After this, grab each end on the left and right and begin to tighten the knot evenly, trying to maintain its shape. To final tighten the knot, pull the root ends of the cables. There is a second way of knitting: we tie a figure eight with cables folded over a length of approximately one meter, but at the same time you will have to carry it around and thread it into the loop along with the short running end of one of the cables and the long main one - this is the inconvenience second knitting method. The connection of two cables with a Flemish knot is considered very strong. This knot, even when tightly tightened, does not damage the cable, and it is relatively easy to untie. In addition, it has excellent quality - it does not slip and holds securely on a synthetic fishing line. "Flat knot" (Fig. 5-31). This knot has long been considered one of the most reliable knots for tying cables of different thicknesses. Having eight weaves, the flat knot never tightens too much, does not creep or spoil the cable, since it does not have sharp bends, and the load on the cables is distributed evenly over the knot. After removing the load on the cable, this knot is easy to untie. Its important advantage is that it is really flat. There are two ways to knit this knot: a loose knot with its free running ends tacked to the main or half-pins at their ends (Fig. 5-31, a) and without such a tack when the knot is tightened (Fig. 5-31, b). A flat knot tied in the first way (in this form it is called a “Josephine knot”) on two cables of different thicknesses almost does not change its shape even with very high traction and is easily untied when the load is removed. The second knitting method is used for tying thinner cables, with the same or almost the same thickness. In this case, it is recommended to first tighten the tied flat knot with your hands so that it does not twist during a sharp pull. After this, when a load is applied to the connected cable, the knot creeps and twists for some time, but when it stops, it holds firmly. It unties without much effort by shifting the loops covering the root ends. Since a flat knot has eight intersections, it can be tied in different ways—there are 256 various options tying it. But not every knot from this number, tied according to the principle of a flat knot (alternating intersection of opposite ends “under and above”), will hold securely. Ninety percent of them are unreliable, and some are even dangerous for tying ropes intended for heavy pulling. Its principle depends on changing the sequence of intersection of connected cables in a flat knot, and it is enough to change this order a little, and the knot acquires other negative qualities. In Fig. 5-31 shows a knitting pattern that has been tested and tested in practice. Before you use this knot for a responsible task, you must first remember its diagram exactly and connect the cables exactly according to it without any even the most insignificant changes. Only in this case will the flat knot serve you faithfully and not let you down, “Hunting Knot” (Fig. 5-32). This new knot was invented by the retired English doctor Edward Hunter (translated from English as “hunter”), and the author’s receipt of a patent for the invention in 1979 caused a sensation in maritime circles in many countries. Essentially, a hunting knot is a successful interweaving of two simple knots tied at the ends of the cables. It holds perfectly on all cables, including the thinnest synthetic fishing lines. “Brasstail knot” (Fig. 5-33). This knot is also reliable for connecting two cables of different thicknesses, both vegetable and synthetic. Its reliability also lies in the fact that it does not immediately untie when the pull on the cable stops. "Furrier's knot" (Fig. 5-34). This wonderful knot is relatively simple, compact, has enough intersections to ensure strong tightening, and can be untied without much difficulty. It can be successfully used for tying synthetic cables and fishing lines. There are two ways to knit it. "Surgical knot" (Fig. 5-35). This unit is still used by doctors today. First, two half-knots are made one after the other with two ends, which are then pulled in different directions. Then another half-knot is tied on top, but in the other direction. The principle of the knot is that the first two half-knots do not allow the two ends to move in different directions while another half-knot is knitted on top. This knot is convenient to use when there is a need to pull and tie some elastic bale or burden with a rope and tighten the first half of the knot on the rope, which, without letting go of its ends with your hands, you have to press with your knee. "Academic node" (Fig. 5-36). This knot is similar to the surgical one, differing only in that instead of one second half-knot, it has two of them. It differs from its ancestor - the straight knot (see Fig. 6-39) in that the running end of the cable is wrapped around the running end of another cable twice, after which the running ends are led towards each other and again wrapped around them twice, that is, at the bottom two half-knots and two half-knots on top, but tied in the opposite direction. This gives it the advantage that when there is a large load on the cable, it is not as tight as a straight knot and is easier to untie. "Dagger knot" (Fig. 5-37). This knot is considered one of the best knots for tying two large diameter plant cables. It is not very complicated in its design and is very compact. It is most convenient to tie it if you first lay the running end of the cable in the form of the number “8” on top of the main one. After this, thread the extended running end of the second cable into the loops, pass it under the middle intersection of the figure eight and bring it above the second intersection of the first cable. Next, the running end of the second cable must be passed under the root end of the first cable and inserted into the figure-of-eight loop. When the knot is tightened, the two running ends of both cables stick out in different directions. The knot is easy to untie if you loosen one of the outer loops. "Weaving knot" (Fig. 5-38). This knot embodies the simplicity, reliability and compactness of instant thread tying. "Straight knot" (Fig. 6-39). Apparently, only in our country there is an unreasonably respectful attitude towards this unit. Sailors from other countries treat him more soberly and even with prejudice. After all, it cannot be used to connect two cables that will be subject to strong traction: it crawls and is dangerous when it gets wet. This node has claimed more human lives than a dozen other nodes combined. Unfortunately, many of the compilers of various manuals and manuals for riggers, builders, firefighters, rock climbers and mountain rescuers still recommend a straight knot for connecting two cables. But it can be sufficiently reliable only if its running ends are attached to the main ones. This knot is good for packing things, packages, etc. A straight knot consists of two half-knots, sequentially tied one above the other in different directions. This is the usual, simplest way to knit it (Fig. 6-39, a). Sailors, who have been using this knot since ancient times to tie cables, use a different tying method (Fig. 6-39, b). Weavers who use a straight knot to tie up broken threads of yarn tie it in their own, special way, convenient for them (Fig. 6-39, c). This knot, which, according to the unanimously accepted characteristic of our specialists, “is so tightened that it cannot be untied and will have to be cut,” turns out, even when wet and tightly tightened, it can be untied very simply, in 1-2 seconds. Take the root end A (Fig. 6-39, d) in your left hand and, so that it does not slip out of your hand, make a couple of slings around your palm. Also take running end B in your right hand. Pull the ends sharply and firmly in different directions. Without releasing end A from your left hand, grasp the remaining part of the knot into your fist with your right hand, holding it with your thumb and forefinger. Pull the root end A to left side, and the knot will come undone. The whole secret is that when you jerk ends A and B in different directions, the straight knot turns into two half-bayonets and completely loses its properties. It can also be easily untied if you take the root end G in your right hand and strongly pull the running end B to the left. Only in this case, the end of G then needs to be pulled to the right, and the rest of the knot (half bayonets) - to the left. When untying a straight knot in this way, remember that if you pull the running end to the right, then pull the main end to the left, and vice versa. When untying a straight knot, one should not forget that with the same force it was tightened, one of its running ends must be pulled with the same force. Even a wet straight knot, tied on the thickest plant cable, which is under strong traction, can always be untied by taking one of the running ends onto a capstan or winch. In any case, there is no need to cut the cable. There are three dangerous knots, very similar to a straight knot: the “woman’s” (Fig. 6-40), the “mother-in-law” (Fig. 6-41) and the thief’s (Fig. 6-42). The primitive “woman’s” knot, unfortunately, has become firmly entrenched in our everyday life, and most people, having learned this knot in childhood, believe so strongly in its utility that they don’t even want to hear about any other knots. However, this traitor node has caused a lot of troubles throughout the history of mankind and even claimed many human lives. The “baby” knot consists of two half-knots, tied sequentially one above the other in the same direction. If you tie two ropes with it and pull, you can immediately see that the knot begins to move along the rope and slide along it. And if you tie it close to one of the ends of the rope being tied, then it can slip when pulled. But, oddly enough, sailors and fishermen of some countries use the woman’s knot in their work. Besides him negative qualities(sliding and not being untied), they caught one of its positive qualities: under certain conditions, it instantly turns into a simple bayonet (see Fig. 3-9) - into one of the simplest and most reliable naval knots to secure the mooring vessel on the shore with a pole, bollard or mooring bollard, without leaving the vessel ashore. And this is done with the help of the “woman’s” knot, despised by sailors. To do this, a loop is made at the end of the cable, which they intend to bring ashore for fastening it with a simple bayonet around the stand, and the running end is connected to the root end with a “woman’s” knot, which is not fully tightened. From the side of the ship, this loop is thrown onto the pedestal and by jerking the main part of the mooring line, the “woman’s” knot turns into a simple bayonet. Some people, tying two ropes together, somehow manage to tie a so-called “mother-in-law’s” knot (Fig. 6-41), somewhat reminiscent of a “woman’s” knot (Fig. 6-40). If in the latter the running ends come out of the knot on one side, then in the “mother-in-law” knot they come out from different sides diagonally. The “mother-in-law” knot is just as insidious as the “woman’s” knot (if not more). It should not be used under any circumstances. "Thief's Knot" (Fig. 6-42). At first glance, it is almost no different from the straight knot (see Fig. 6-39) and it seems that it is akin to it. But if you look closely, it becomes clear that the running ends of the thief’s knot come out of it diagonally. The thief's knot, like the "woman's" and "mother-in-law's" knots, are shown for clarity in order to emphasize their similarities and differences with the straight knot. It is not recommended to use these four knots, as they are unreliable for connecting two cables.
NON-TIGHTENED LOOP “Oak loop” (Fig. 7-43). This is the simplest loop of all existing non-tightened loops. It is knitted with a simple knot at the end of a cable folded in half (hereinafter in the diagrams, a circle indicates a working loop). The oak loop is strong. and is safe; unlike an oak knot, it can be used on a synthetic cable. However, the oak loop weakens the cable, bending it; it is very difficult to untie. "Veinal loop" (Fig. 7-44). If, when tying an oak loop, you make an additional hose with the running end folded in half, you will get a loop that will be a little easier to untie. It is used for thin fishing lines. "Flemish loop" (Fig. 7-45). Knitted in a figure eight on a double-folded cable, it is a strong and easily untied loop at the end of the cable. The Flemish loop is suitable for tying on both thick and thin cables. It almost does not weaken the strength of the cable. Used for fastening strings of musical instruments and other purposes. “Perfect loop” (Fig. 7-46). The knot with which this fixed loop is tied at the end of the cable is simple, reliable and does not slip even on the thinnest synthetic fishing line. The perfect loop is very popular abroad among fishermen. "Gazebo knot" (Fig. 7-47). The second name for this knot is the “bowline knot”, or “bowline”. This is one of the oldest and most amazing knots ever invented by man. It is often referred to as the "King of Knots"; Not every sea knot can compare with it in the number of positive properties it possesses. It is surprisingly easy to knit, even with strong traction it never tightens “tightly”, does not spoil the cable, never slides along the cable, does not unravel itself and is easily untied when needed. By appearance it is similar to a weaving knot, but its running end does not go into the loop of the other end, but into the loop of its root end. The gazebo knot, despite its amazing compactness, simultaneously contains elements of a simple knot, half-bayonet, weaving and straight knot. The elements of all these knots in a certain combination give the gazebo knot the right to be called universal. The main purpose of the gazebo knot is to tie a cable around a person’s armpits when ascending to a height or when lowering. You can insert a gazebo into the non-tightening loop of this unit (a small wooden platform board used to lift a person onto the mast or lower him over the side of the vessel during painting or other work). This knot can be successfully used to tie two cables of both the same and different diameters or cables made of various materials(a connection using two gazebo nodes with loops of two cables made of different materials will be the most reliable). In addition, you can make a reliable tightening loop from a gazebo knot (see below, “Running Bowline”). The gazebo knot can also be safely used to temporarily shorten the cable or in cases where it is necessary to eliminate a worn-out piece of cable from work by tying the knot so that this piece falls on the loop. There are many ways to tie a bow knot. In Fig. 7-47 presents the most rational and simplest method. In life, the ability to quickly tie a bow knot around your waist can always come in handy. You need to be able to do this with one hand, with one continuous movement of the hand, in the dark, in 2-3 seconds. It is not at all difficult to learn this, just do it several times in a row. To untie the gazebo knot, it is enough to slightly move the loop of the running end along the weakened root part of the cable. Double gazebo knot (Fig. 7-48). This knot, which has two non-tightening loops, is used instead of a gazebo to lift a person to a height, to raise or lower a person who has lost consciousness, and in other cases. When tying a knot, one of the loops is made almost half the size of the other. A person sits in one loop, the second loop clasps his torso under the armpits. This allows him, having risen to a height, to work with both hands. There are several ways to tie a double bower knot. Let's consider the simplest one. The knot is tied with a rope folded in half. After inserting the running end (in the form of a loop) into the small loop of the knot, you need to pull it out a little and, wrapping it around the large loop, place it in top part node. Holding the main part of the cable, pull down with the other hand right side large double loop. After this, the knot will be tightened and ready for use. The top knot (Fig. 7-49) can be used for fastening temporary guy wires when installing masts, driving piles, and planting seedling trees. If you have a jug whose neck has a more or less large protrusion, you can use a top knot to make a comfortable handle for it. To carry watermelons and large melons, it is best to use this knot, because it was once used on warships to carry cannonballs. A piece of any cable 2 meters long makes a reliable basket for the largest watermelon. In this case, the knot should not be fully tightened, but its three loops should be tied with two free ends. Of the known methods of tying a top knot, the one shown in the diagram is considered the best. Boatswain's, or "Spanish gazebo" knot (Fig. 7-50). It, like the double gazebo, serves to lift a person up or lower him from a height. A foot is inserted into each of the two loops of the boatswain's knot and the rope is held with one hand. This knot can be used to raise (or lower from a height) an unconscious person. To prevent it from falling out of the two loops, one or two half-bayonets are additionally tied on its chest with the running end of the cable. Burlatskaya loop (Fig. 7-51). It is also called a harness loop, or a Pushkar knot. This loop can be made either at the end of the cable or at any part of it. The loop is designed to apply traction in any direction. It is easy to tie and holds securely, but before a load is applied to the loop, it should be tightened firmly with your hands, since with a sharp pull it tends to turn over and slide along the cable for some time. Several loops tied in this way will help pull out a car stuck in the mud, allow you to climb to a height or descend from a steep cliff.
TIGHTENING LOOPES Running simple knot (Fig. 8-52). This is the simplest knot that forms a tightening loop. When pulling on the root end, the loop is tightened, but it can be increased in size by pulling the running end away from the loop. The knot can be tied in any part of the rope. With its help, you can tighten a bag, tie a bale, attach a cable to something, moor a boat to a pile. Sliding figure eight (Fig. 8-53). Based on the figure-eight principle, this knot belongs to the category of reliable, tightly tightened loops. It has the property of being tightened smoothly and evenly when pulled at the root end. ".- ." ...: ..; . Silk knot (Fig. 8-54). This knot is borrowed from the simple technique of bird catchers. Snares made from horse hair or the thinnest fishing line work flawlessly with the help of such a knot. The snare knot is considered one of the smoothest and easiest knots to tighten. Running bowline (Fig. 8-55). This is the same arbor knot with a small loop into which the root end is passed. It is based on the lasso principle. The running bowline works flawlessly. It is used to catch floating logs and driftwood; it is used to search for and raise anchors left at the bottom. Tightening noose (Fig. 8-56). This knot is also called the “scaffold” or “gallows” knot. It also finds other uses: it is used to temporarily attach a cable to objects floating in the water or to throw and secure a cable to an object. This knot has an advantage even over such a good knot as a noose with half bayonets, in that the running end of the cable cannot slip out of the loop, and therefore a tightening noose is considered more reliable. To tie this knot, the cable is laid in the form of two loops of equal size. Both loops are surrounded several times with the running end of the cable, after which this end is passed into the loop facing the root part of the cable, and, while pulling out the outermost loop, it is clamped in it. A tightening noose can always be easily untied if you pull the root part cable This gloomy unit can also be used to store rope in a compact coil or as a weight at the throwing end to feed it. If you find it insufficient as a weight at the throwing end, then lower it into the water before use. The “drunk” knot (Fig. 8-57) has two tightening loops. When the running and root ends are pulled simultaneously, the loops are tightened. The knot apparently got its name because it was used to pacify excessively riotous people by putting loops on the wrists behind the back and tying the ends on the chest.
QUICK-RELEASE KNOTS Figure 8 untie (Fig. 9-58). If an ordinary figure eight (see Fig. 2-2) is made with a loop, that is, the running end folded in half is passed into its last loop, then we will get a quick-release stopper. An untied running simple knot (Fig. 9-59). A running simple knot (see Fig. 8-52) can easily be turned into a quick-release knot without changing its function, i.e. using it as a tightening loop, and not as a quick-release knot. To do this, you need to insert the running end, folded in half, into its loop. In this case, it will have two properties at once: it will tighten and quickly untie if you pull the running end sticking out of the loop. This is a very common knot. All over the world they are used to tie horses by the bridle to a leash. To prevent the knot from accidentally coming undone, the end of the bridle is inserted into the loop (Fig. 9-59, b). With the help of a simple knot that can be untied, you can moor the boat behind a shore pile or pedestal in such a way that, if necessary, the cable can be released without leaving the boat by pulling the running end, which is left long enough. The Kalmyk knot (Fig. 9-60) is one of the most practical and reliable knots. The origin of the knot is clear from the name. And, although the Kalmyk steppes do not evoke associations with the sea and ships, it has long been used in the navy. Foreign sailors do not know him; he is not mentioned in foreign manuals. This beautiful knot is knitted almost instantly as follows. Place the running end of the cable behind the object and take it, stepping back a little from the end, from above with your left hand with your thumb towards you. With your right hand, place the main end over your left fist, in which the running end is already clamped, and make a full turn around it with the main part of the cable. Then, with the movement of your left hand, move the root end under the root part of the large loop while simultaneously carrying the running end around the same part of the cable and then intercepting the running end with the fingers of your left hand. After this, carefully pull the running end in the form of a loop through the main end hose located on the left hand (by dropping the hose), so that the running end does not straighten, and tighten the knot with the main end. The Kalmyk knot holds securely and quickly unties if you pull the running end. It is used for temporary fastening of the casting end to the mooring line (ring) when delivering the latter from the vessel to the pier. It is used for attaching reins to a bridle, as well as for tying a horse in a stable. If you pass the running end, not folded in half, into the loop of the Kalmyk knot, then the knot will not be a quick-release one. This is how he is. called a Cossack knot. The untied weaving knot (Fig. 9-61) holds securely, but can be untied at any moment, even under tension. Reef node (Fig. 9-62). This one was popular in the past by sea. The knot is known in everyday life as a “knot with one bow.” It is familiar to everyone; many tie their shoelaces with it. This simple and useful knot is very similar to a straight knot and is knitted in the manner shown in Fig. 6-39, except that when tying the second half-knot, its running end is threaded into the loop folded in half. When you pull on the running end, the knot instantly unties. Double reef or halyard knot (Fig. 9-63). Sailors almost never use it: a reef knot is enough for temporary tying. In Vladimir Dahl's dictionary it is called a “loop knot” and “burdock (bow)”. It is often called a byte node. It is knitted in the same way as a straight knot, but in the second half-knot the running ends of the cable are tied folded in half. This is an indispensable knot for tying shoe laces, ropes, bows on the neck and bows in the hair, as well as on packages and boxes. The mill knot (Fig. 9-64) is considered one of the most common among the many clever knots for tying bags. In principle, this is the same figure eight, in the second loop of which the running end folded in half is passed. It is very convenient because it can be tightened tightly and quickly untied by pulling the running end. Bucket knot (Fig. 9-65). Using this “remotely untieable” knot, you can lower an object from a height, for example, a bucket of water or mortar, place it on the ground and raise the rope up again. This original unit can be successfully used by firefighters, builders and climbers. Imagine that a climber needs to descend from a height using a rope. He is walking alone, and he has one rope, which he will still need. The rope needs to be secured with a bucket knot, go down along its root end and, with a jerk on the long running end, untie the knot tied at the top.
SPECIAL SEA KNOTS Hack knot (Fig. 10-66). When the necessary stopper is not at hand, the load is lifted with a crane or boom on a hook, using a regular steel or plant cable. In this case, they use a hook knot. When there is a load on the main end, the running end of the cable is pressed against the inside of the neck of the hook, and the loop tightened around its back holds both ends - this is the great wisdom of this simple knot. When putting the cable on the hook, you need to carefully ensure that the root end of the cable always passes under the chassis. However, it should be borne in mind that it is possible to lay and safely lift the load with a single hook knot only if the cable is thick enough in relation to the hook. To prevent the hook assembly from becoming poisoned when the load is removed, the running end is grabbed with a temporary grip to the main one. Using the principle of the hook knot, it is possible to lift the bag on the hook without a cable if its neck can be wrapped once around the back of the hook. Hook assembly with hose (Fig. 10-67). A thin cable secured with a single hook knot can slide off the back of the hook. If the cable is thin in relation to the hook, it is laid with a hook assembly with a hose, which greatly increases the reliability of lifting the load. "Cat's Paw" (Fig. 10-68). The name of this knot is justified - it looks like a cat's paw. This knot is used in cases where the sling needs to be attached to the hook in such a way that there is no excess slack. To tie this knot, the loop of the sling is placed on top of its two ends - two small loops are obtained, each of which is simultaneously twisted outward several times, depending on how much the sling needs to be reduced. Then the loops are brought together and put on the hook. The “cat's paw” is not clamped tightly, and the knot is easy to remove from the hook if there is no load on the line. The barrel knot (Fig. 10-69) is used when there is no special sling or device for lifting full open barrels in a vertical position. A half-knot is knitted on the middle part of the cable; the half-loops of the knot are spread apart and cover the middle part of the barrel. The lower part of the loop passes through the center of the bottom of the barrel, the free ends of the cable are tied with a straight knot, and if the cable is already secured at one end, then with a gazebo knot. The barrel unit is used when loading various types of containers that have a cylindrical shape. In everyday life, you can quickly tie it around a can or tank without a handle. Amphora knot (Fig. 10-70). The ancient Greeks came up with this knot; it allowed them to conveniently carry amphoras (universal vessels with pointed bottoms in which olive oil, olives, wine, grain, flour, etc. were stored and transported. ) without the risk of losing their valuable contents. This knot is not simple, it is difficult to knit, in several stages, but with its help you can make an excellent rope handle for carrying a bottle, jug or, in general, any vessel with a small protrusion on the neck. Olympic knot (Fig. 10-71). It was called Olympic because it consists of five rings. This ancient sea knot dates back to the “golden age of sail” on English sounds very sentimental: “Two hearts beating as one.” The purpose of the knot is to temporarily shorten the cable. The Olympic knot is reliable and, despite its apparent cumbersomeness at first glance, is knitted quite simply. Crab loop, or protracted fire (Fig. 10-72). The peculiarity of this knot is that it can work in two qualities: a tightening loop or a non-tightening loop. If the ends of the crab knot at the points marked with the letters A and B are sharply and strongly pulled in different directions, indicated by the arrows, the knot ceases to be tightened. Taking the form shown in the third position from the right in the figure, the knot is no longer tightened, its loop becomes permanent.
KNOTS FOR FISHING TACKLE Blind knot (Fig. 11-73). If there is a non-tightening loop at the end of the leash, the easiest and most reliable way to attach a fishing hook to it is to thread the end through the eye of the hook and throw it over the hook, forming a blind loop. This method is good for both cotton and thin synthetic fishing lines; it can also be used if the loop is made of soft wire. This knot is convenient for tying sinkers to the fishing line. Fisherman's eight (Fig. 11-74). This is a reliable way to attach fishing line to an eye hook. He gives a full guarantee that the hook will not come undone. Tuna knot (Fig. 11-75). It differs from other knots in that the eye of the hook is wrapped simultaneously with two loops (like a blind loop). Although it is difficult to knit, it is considered the best among all fishing knots designed for synthetic fishing line. Step unit (Fig. 11-76). This knot is the most reliable for attaching fishing line to a hook without an eye. It is somewhat reminiscent of a tightening noose. Leash based on a running knot (Fig. 11-77). The ability to quickly and reliably tie leashes to a fishing line is an important matter for every angler. To tie a transverse leash to the fishing line in this way, tie it in in the right place line running simple knot, but do not tighten it all the way. At the end of the leash, tie a figure eight and pass its end into the loop of the running knot. After tightening the last knot as shown in Fig. 11-77, you will securely attach the leader to the fishing line. Leash based on a snake knot (Fig. 11-78). This is a more complex, but also more reliable way of tying a transverse leash to a fishing line. Before tightening the snake knot made on the fishing line, insert the end of the leash with a figure eight tied into its middle. When tying a snake knot, both parts will come together and securely clamp the leash in front of the figure eight. Roller assembly (Fig. 11 -79). To tie this knot on the fishing line, you first need to make a simple knot and insert the running end of the leash into it. The latter needs to be secured like a multiple figure eight around the fishing line and the root end of the leash. This type of fastening is quite reliable and uncomplicated.
DECORATIVE KNOTS In addition to the decorative knots already discussed (oyster, straight, Flemish, flat and head), many other beautiful knots can be used in applied art. After all, strict, symmetrical, and often ornate and very complex in form, knot patterns have long been used to create heraldic signs, coats of arms, emblems, brand names, seals and vignettes. Tailors often used knot patterns for braiding and trimming of ceremonial uniforms and ladies' ball gowns. Many patterns of tied but loose knots are used by lacemakers and embroiderers to finish their products, as well as when weaving macrame. Let's consider nodes that, in addition to their practical purpose, when various works with cables can be used in everyday life as decorative units. Royal knot (Fig. 12-80). In principle, this is a reliable stopper knot, like a figure eight, stevedore, deadeye, etc. Tied on a thick cord, the royal knot is decorative and can be used for tying the ends of cords for curtains, curtains, drapes, etc. Cord knot (Fig. . 12-81). A correctly tied and evenly tightened cord knot looks very impressive on cords for curtains, curtains and drapes. It can be used at the end of the cord to switch an electrical switch. Turkish knot (Fig. 12-82). To tie this knot correctly, you need to be patient. The knot is quite complicated, but it looks beautiful on a thick cable, especially if it is tied twice. Can be used for the already mentioned cords. Three-loop knot (Fig. 12-83). The symmetrical design of this stopper unit used in maritime affairs has long attracted the attention of artists and graphic artists of applied arts. This is a good ornament for various kinds of decorative artwork. Four-loop knot (Fig. 12-84). The symmetry and certain ornateness of this knot allow it to be classified as decorative knots. It serves artists in choosing patterns for decorative decoration.
First simple node 
Second simple knot 
We tighten 
You can additionally tie control knots so that the knot “creeps” less 
The white rope is pulled along the path of the green one 
White rope - along the path of the green one 
We tighten 
You can make control nodes 
The first node is ready 
The second node is ready 
Two knots are pulled together 
Don’t forget to leave a “window” in the middle of the knot to let the ends of the rope pass through 
We stretch the ends of the rope through the “window” 
We tighten 
