Installation and configuration of the T2 digital television antenna. How to set up digital television on your TV

Digital receiver connection sequence

First, you should check the equipment of the receiver for digital television and make the correct connection of all its components. A digital television kit usually includes:

• Receiver for decoding a digital signal in DVB T2 format.
• Cable for transmitting the converted signal from the receiver to the TV.
• Indoor digital antenna for receiving a television signal.
• Cable connecting the antenna to the receiver.
• Remote control.
• External power supply (not available on all models).

• Connecting the receiver to the TV.
• Connecting an indoor or outdoor antenna to the receiver.
• Installing batteries in the control panel.
• Turn on the power on the receiver.

Setting procedure

Setting up digital terrestrial television This is not done on the receiver itself, but through the TV’s setup menu. To do this, using the remote control, you need to open the TV menu and enter its options. There is an auto-tuning section, by entering which you need to determine the signal source. There are two of them today - an antenna and a cable. Since the signal to the TV comes from the receiver via cable, thensetting up digital television performed by selecting the cable as the signal source and pressing the start button.

Then a dialog box will appear on the screen asking you to select the type of signal source. Since it is fulfilledsetting up digital television , then you need to click on the “digital” item. By pressing the start button, we proceed to the next stage of setup, selecting the search mode. Every modern TV has several such modes, but in this case Full search mode required. Setting up the mode requires filling in some operating parameters, in which you need to set approximately the following values:

• Frequency - approximately 314 MHz.
• Modulation - should be equal to 256 QAM.
• Transfer speed - no less than 6875 kS/s.

Thus, setting up digital television is a completely simple process, even for people who only have experience with setting up analog television. All connectors on the TV and receiver are marked according to the markings of the connecting cables, so it is impossible to make a mistake when connecting. Moreover, the digital television package always includes technical documentation, which describes in detail the digital television connection diagram and its configuration. Therefore, when buying a set for digital television, it is not at all necessary to call a specialist to connect and configure it.

So, you have decided to connect and configure digital terrestrial television for your Smart TV device. This, of course, can be done regardless of what manufacturer of your TV you have - Samsung, LG, Philips or some other. The main thing is that your gadget has a built-in receiver. It is important to note that such a receiver is installed in almost every modern Smart TV. But just in case, you can clarify this either in the instructions or in the store where you purchased the TV (or find information on the Internet).

There is nothing complicated in setting up digital terrestrial television if you strictly follow the instructions

What can the fact that the TV is capable of receiving digital terrestrial television give you? Remember the old TVs, which most often had a screen with a twitching image, on which it was often simply impossible to watch your favorite program - these were analog channels. So, modern world overcame this problem with the help of digital TV channels that have high quality images and sound. Agree, in this case it will be much more pleasant to watch movies, TV shows or the same news. In general, only pros and no cons! So let's move on directly to how to connect digital terrestrial television to your TV.

How to set up digital terrestrial television?

Before we begin setting up digital terrestrial television, let's take a look at the preparations. First of all, you will need the antenna itself, which you must first purchase or install (if you have your own). You can also calculate the antenna so that there are no problems with the cable length. And, of course, a TV with support for digital channels. Pay attention to this Special attention, since not all TVs can receive them.

If the answer to these two questions is yes, that is, you have both an antenna and a TV capable of receiving digital channels (it has a special built-in receiver), then you can move on. As for the receiver, carefully read the instructions for using Smart TV. Such information must be indicated therein.

Universal method

The method below is not entirely universal, but rather general. That is, the principle of the sequence of actions will be similar to others, but some menu items or button names will differ. Therefore, you can try your logical and analytical abilities in practice and draw an analogy with your device. If you doubt yourself or don’t want to complicate your life, then simply find the instructions for your TV below (Samsung, LG and Philips are considered). Anyway, let's move on:

1. We connect the antenna to the TV using a special connector.
2. Now we pick up the TV remote control and click on “Menu”. This button is usually the largest, and it is located in an accessible and visible place.
3. Next, we need to find the options or settings where we need automatic mode for them.
4. If necessary, you can specify the signal source (this is, of course, cable), and then select digital channels. For each positive choice, click OK or “Next”.
5. Specify that you need a full channel search. A field for filling out data may also appear here. In this case, we indicate the following information (note that if there is a network search for channels, then this data does not need to be specified):
   • For the frequency, use a value equal to 314 MHz.
   • For transmission speed - 6875 KS/s
   • Well, modulation - 256
6. Click the long-awaited “Start” or “Start” button. All you have to do is wait for the process to complete, after which you can enjoy watching TV channels in higher quality, since your TV will be able to receive digital terrestrial television.

Samsung TVs

1. As in the previous instructions, first connect the antenna to your Samsung TV.
2. Using the special button on the remote control, enter the device settings.
3. In the list that appears, we will need a tab with broadcast (or another name, where the antenna icon is drawn), where there is an “Antenna” item, in it you need to indicate that the connection is made using a cable.
4. Then open the “Country” menu item. Here we will select “Other”.
5. Now you should see a window asking you to enter a special PIN code. The default is 0000 if you haven't changed anything yourself.
6. If the device again asks you to specify the signal source, then without hesitation we select the cable.
7. Next, set the following search settings: fast mode, automatic network selection. Don't forget to fill in this information:
   • For transmission speed - 6875 KS/s.
   • Well, and modulation - 256.
8. As they often write on the Internet, “turn on the hatiko mode” - and wait for the process to complete. If completed successfully, you will be able to connect digital channels to your TV.

LG TVs

1. It's LG Smart TV's turn. Just in case, let's repeat our first step - connecting the antenna to the TV.
2. Next, open the device settings using the button on the remote control.
3. We will need to find the country parameters where we should select Finland or Germany.
4. The next stage is auto-search for channels. It can also be easily found in the menu tab with the antenna drawn.
5. Next, we will need to indicate what type of connection we have. As you know, this is a cable. Therefore, the choice here is obvious and there is no need to think for a long time.
6. We find ourselves in special settings, where we indicate data that is already familiar to us (if you have read the previous paragraphs). If not, then look:
   • For the frequency, use a value equal to 314 MHz.
   • Transmission speed - 6875 KS/s.
   • Modulation - 256.
7. We are waiting for the end of the search for digital channels. If everything went well, then you can please yourself by watching some program in digital quality.

It’s worth mentioning right away about automatic channel updates on LG TVs. Not all models have this feature. If this is the case, then you don’t have to search again - the TV will do everything for you. This setting is adjustable, so it can be turned off in the options if desired.

Philips TVs

As mentioned above, the method is practically no different from the previous ones, except for the names of menu items and some tabs. Let's get started:

1. Connect the antenna to the TV and go to the “Installation” tab of the configuration menu using the remote control.
2. A list with parameters will appear in front of you. We need the “Channel Settings” item.
3. Next, we enter the automatic installation, where the system will notify you about updating the channel list. We are not afraid, but click the “Start” button.
4. Now you must click on reinstall channels, and then select Germany or Finland as the country.
5. After these manipulations, you will need to set the connection type to “Cable”.
6. It's time to set some parameters using the "Settings" item. Here the speed should be 314.
7. And now, after numerous manipulations with the settings and searching for the necessary menu items, we have reached the finish line: click on “Start” and wait for the process to complete. Upon completion, your fruitful work is declared complete.

How to decode channels?

First of all, please note that if you have set up digital channels according to the method described above, then you should not have any encrypted channels at all. This problem occurs when you have cable television (for example, NTV Plus or Tricolor TV). There you set a special price for watching channels for a certain period of time. When your subscription expires, you are blocked from accessing these digital channels. Then you need to pay for the services and configure the receiver again. If you don’t know how to do this, you can contact the specialists specifically for your receiver by phone number or through their website. You can also try to find instructions on the same official website, which describes in detail the entire procedure for resuming viewing.

Summarizing

Digital terrestrial television has a higher display quality compared to analogue channels. You can connect and configure this function very easily on any TV - you don’t need any special knowledge to do this. Let's summarize our instructions as common for most TVs:

1. We connect the antenna.
2. In the settings menu we find auto search for channels.
3. Then we configure the connection type “Cable” and, if necessary, set the parameters in the data area (baud rate, frequency and modulation).
4. Also, if necessary, you need to select a country - most often it is Germany or Finland.
5. We start searching for channels using the start button in the dialog box.
6. We wait for the search to complete and move on to the long-awaited viewing!

Hello dear readers of the blog site. Today I will try to explain in detail and in an accessible language what setting up a receiver is and how to correctly and without unnecessary problems tune digital television.

In previous articles I have already talked in detail about. Before you start setting up your TV set-top box, you need to set it up correctly.

Majority digital set-top boxes very similar to each other. They may differ in the set of additional functions, but with all this, they perform their main purpose of “transmitting the converted signal to a TV” in the same way. If you set up digital television correctly, then you can enjoy watching over-the-air channels at home or in a suburban area.

We would like to remind you that an integral part of a complete connection scheme is a suitable antenna. You should approach your dacha with full responsibility.

Since on this moment There are a huge number of TV set-top boxes on sale, so I don’t see any point in citing a specific one as an example. That is why I will try to describe in accessible language main nuances how to set up digital television.

However, if there are certain snags throughout the process. It’s worth taking a peek at the instructions, or asking a question in the comments to this article.

The first thing you need to do after turning on the TV is to select the appropriate video input using the remote control. If you have enough old TV, then this will be the TV/AV switch. If the model is new, then it is advisable to select the connection via an HDMI cable.

Now it’s time to move on to setting up the receiver directly:

1. Using the remote control of the set-top box, find and press the “Menu” button;
2. To make the process of setting up the receiver clear and simple, the first step is to go to the menu and select the appropriate language (in our case, Russian);
3. In the section intended for searching channels, select the DVB-T2 signal standard. These actions will avoid searching for analog signals;
4. Thanks to automatic search, you can get twenty channels from two at once.

Please note that when setting up digital television, a situation may occur that only ten channels could be received. In order to solve this problem and use the receiver fully, it is worth checking whether the antenna is directed correctly and whether a suitable tower has been selected.

The search for channels occurs in two packets in turn. That is why at first you will see only ten channels, and after waiting a little more the rest will be installed. If the order does not suit you, then this can be easily corrected. However, I will talk about this in one of the new articles on my blog. In order not to miss the latest issue, I advise you to subscribe to updates.

It may happen that certain channels are not found. In this case, you should use manual configuration of the receiver. Having selected the required frequency, the search will be carried out channel by channel.

Checking signal quality when setting up digital television

At the very end of all actions, it is worth checking the signal quality so that peace of mind end here. Using the remote control with the TV and set-top box turned on, press the “info” button three times (it’s usually yellow color). We pay attention to the quality indicators of the received signal and its intensity. If the data is above 60%, then everything is done perfectly.

Be sure to check the signal quality on two different multiplexes: on the first channel and, for example, on TNT.

That's all. As I said at the beginning of the article, setting up a receiver and digital television is a fairly easy process. Even a child can cope with this task. And according to tradition, if there are any additional questions, I’m waiting for them in the comments.

Our company’s specialists will quickly and efficiently connect and configure free tv channels analogue and digital terrestrial television, which are broadcast by the Russian Tele and Radio Broadcasting Network from the Ostankino TV tower.

TVs and television receivers - terrestrial television tuners (set-top boxes) are connected. Our service covers all areas of Moscow.

Terrestrial television. How to watch TV channels for free

On the territory of Moscow and the region with Ostankino, the Russian television and radio network RTRS. RF transmits 19 analog and 3 packages (30 units) digital free channels terrestrial TV. This makes it possible to receive Russian television programs without registering or paying a subscription fee. Reception is carried out on individual, located in the room, or external television antennas. The receiving antenna can be a simple wire, the length of which reaches 1-2 meters. Broadcasting is carried out using meter and UHF waves. TV channels that are broadcast can be viewed for free.

A list of suggested frequencies of free terrestrial TV channels will help you set up your TVs. If the broadcast frequency of a particular terrestrial television channel is indicated, this will speed up the setup of televisions that do not have an automatic channel sorting function. With such information, it is easier to tune TV channels on outdated TV models with incorrect operation of automatic frequency adjustment systems for the local oscillator APCG. The table has analog frequencies that are needed to watch TV channels on your TV for free. Our website allows you to download a list of free TV channels on terrestrial TV in Moscow.

List of free TV channels - terrestrial television.

Digital terrestrial television

Free digital channels, coming from the television tower, is received by a special antenna for digital TV. To view such channels, you need to have:

• access to a common external antenna (installed on the roof of houses);
• access to an individual (external or small internal UHF antenna);
• a TV is available, as well as a standard DVB-T2 digital tuner;
• providing MPEG 4 video compression standard and Multiple PLP mode. This may be a special device connected to the TV.

Initially, digital broadcasts were carried out by the company rtrs.rf using the DVB-T system. Some regions are still using its services. Everything is going to the point that this system will be replaced by a new one digital terrestrial television broadcasting system DVB-T2. It was she who was accepted as the standard. TVs with set-top boxes with a DVB-T tuner will not allow you to view television programs V new system on-air television broadcasting.

1, 2, 3 multiplex digital terrestrial television - list 2016

We are publishing a list of free digital terrestrial TV channels received in Moscow and the Moscow Region.

IN first multiplex includes a set of 10 free TV channels, broadcast on the frequency of the 30th TV channel 546 MHz using the DVB-T2 digital terrestrial television system. The second multiplex includes a set of television channels received on the 24th frequency channel 498 MHz in the DVB-T2 system. Third multiplex aired in 2015. The third multiplex of digital terrestrial television is transmitted in test mode on the vacant frequency of television channel 34, which was previously broadcast in the outdated DVB-T digital television system. In the latter you will find high definition HD channels.

Digital television dvb-t2 format coverage area of ​​the Moscow region

Digital television in the DVB-T2 format will soon cover the entire Moscow region. In March 2016 digital TV coverage area on the map includes the following digital terrestrial television transmitters:

1) Moscow, Ostankino - RTRS-1 546 MHz, broadcasting; RTRS-2 498 MHz, broadcasting.
2) Moscow Region, Volokolamsk - RTRS-1 778 MHz, broadcasts; RTRS-2 754 MHz, standby mode.
3) Moscow region, Zaraysk - RTRS-1 778 MHz, broadcasts; RTRS-2 770 MHz, standby mode.
4) Moscow Region, Shatura - RTRS-1 730 MHz, broadcasts; RTRS-2 754 MHz, broadcasting.
5) Moscow, Butovo-RTRS-1 546 MHz, under construction; RTRS-2 498 MHz, under construction.
6) Moscow Region, Istrinsky district, Davydovskoye - RTRS-1 546 MHz, under construction; RTRS-2 498 MHz, under construction.
7) Moscow Region, Ruza district, Morevo - RTRS-1 778 MHz, under construction; RTRS-2 754 MHz, under construction.
8) Moscow Region, Naro-Fominsk district, Pozhitkovo-RTRS-1 546 MHz, under construction; RTRS-2 498 MHz, under construction.
9) Moscow, Troitsky Autonomous District, Rogovo-RTRS-1 546 MHz, under construction; RTRS-2 498 MHz, under construction.
10) Moscow Region, Chekhov - RTRS-1 546 MHz, under construction; RTRS-2 770 MHz, under construction.
11) Moscow Region, Stupinsky district, Alfimovo - RTRS-1 778 MHz, under construction; RTRS-2 770 MHz, under construction.
12) Moscow Region, Voskresensky district, Bogatishchevo - RTRS-1 546 MHz, under construction; RTRS-2 770 MHz, under construction.
13) Moscow Region, Orekhovo-Zuevsky district, Likino - Dulevo-RTRS-1 730 MHz, under construction; RTRS-2 754 MHz, under construction.
14) Moscow Region, Shchelkovsky district, Petrovskoye-RTRS-1 546 MHz, under construction; RTRS-2 770 MHz, under construction.
15) Moscow Region, Sergiev Posad district, Mishutino-RTRS-1 546 MHz, under construction; RTRS-2 754 MHz, under construction.
16) Moscow Region, Dmitrovsky district, Podcherkovo - RTRS-1 546 MHz, under construction; RTRS-2 770 MHz, under construction.
17) Moscow Region, Dmitrovsky district, Novoselki - RTRS-1 546 MHz, under construction; RTRS-2 754 MHz, under construction.
18) Moscow Region, Mozhaisky district, Otyakovo - RTRS-1 778 MHz, under construction; RTRS-2 754 MHz, under construction.
19) Moscow Region, Shakhovsky district, Zhilye Gory - RTRS-1 778 MHz, under construction; RTRS-2 754 MHz, under construction.
20) Moscow Region, Stupino - RTRS-1 778 MHz, under construction; RTRS-2 770 MHz, under construction.
21) Moscow Region, Ozyory - RTRS-1 778 MHz, under construction; RTRS-2 770 MHz, under construction.
22) Moscow Region, Egoryevsky district, Kuzminki - RTRS-1 730 MHz, under construction; RTRS-2 754 MHz, under construction.
23) Moscow Region, Serpukhov - RTRS-1 546 MHz, under construction; RTRS-2 770 MHz, under construction.
24) Moscow Region, Klin - RTRS-1 778 MHz, under construction; RTRS-2 754 MHz, under construction.

How to watch DVB-T2 digital television for free?

The main task is that you need a regular decimeter antenna aimed at Moscow, and not a house antenna. This could be a regular antenna cable. If the cable does not pick up a signal, you can buy a UHF antenna - there are many different ones and the price ranges from 300 to 1000 rubles.

If your TV does not support DVB-T2, you can buy an external tuner. It connects to any TV and costs around 1000 rubles.

In order to watch both analog and digital channels, you will need a signal mixer - the video has one.

How do many pass their time? That's right, behind the TV. Television is a great opportunity to spend your leisure time with interest. And modern TV is only meeting the consumer halfway, increasing the “range” of functions every year. Soon all television broadcasting will switch to digital way signal transmission, but why not start keeping up with progress now? In this article, we will figure out how to set up digital channels on a Samsung TV via an antenna so that you do not have any difficulties in this process.

What is digital television?

Many people are not even familiar with the concept itself. Digital television is a current method of transmitting a signal and receiving it in a compressed form. It is with its help that today you can get a picture of impeccable quality.

This type of television has a number of advantages:

1. The highest quality sound and picture. Television broadcasting is not subject to interference.
2. When installing, you won't need to rummage around and get confused in unnecessary wires.
3. The variety of channels will satisfy the tastes of even the largest family.
4. It is not necessary to call installation wizards. Our instructions will clearly show that you can easily do it yourself.
5. With this TV you can access the Internet.

Some facts about modern TV

It's no secret that previously all television broadcasting was analog. Digital and analog differ in the type of information transmission; we have already talked above about which type is better.

China and Russia were going to do full transition for signal transmission using digital channels by 2015. But this was prevented a large number of still working analogue transmitters. In 2016, the Minister of Communications made a statement that support for analogue TV would soon be discontinued (conditional date - 2018). The same trends are observed in other countries of the CIS and beyond.

Setting up digital television on Samsung

Digital TV has become popular since its inception. And there are reasons for this:

• You only need to do the setup once, and you will never have to adjust any antennas, and you don’t need to retune your TV to watch something else.
• This type of television does not have any interference, but if any problems with the signal arise, you will not be able to watch the programs.
• Television of this format (DTV format) is extremely popular among the population.
• To set up channels, it is not necessary to call a specialist; everyone can do it themselves. One of the requirements is that the model supports DVB-C tuner standards.

Important! All modern devices from Samsung equipped with such standards. Even older models are not deprived of this trend.

Therefore, we will now talk about setting up “digital” on Samsung TVs.

How to set up digital channels on a Samsung TV? There is nothing complicated here. Read the clear instructions to make sure:

• Visit the menu and open the “Channel” section.
• Open the “Country” item.
• If the TV requires a PIN, then try entering the classic passwords: 0000, 1234, 1111.
• TV setup occurs in the “Other” tab.
• Go back and go to “Cable Search Options”.
• Here you must set the frequency to 290 MHz and the transmission speed to 6875 ks/s, and the modulation to about 256 QAM;
• Returns again and go to “Auto Configuration”.
• Select “Cable” for the signal source.
• We choose “Digital”.

Important! If you have not yet set up analog TV, then go to the “Analogue and Digital” section.

• Go to “Network” and start setting up using the “Login” item.

Setting up Samsung Smart TV

How to install digital channels on a Samsung TV if it is new? On TVs with the “Smart” function, things are simpler, and setting up analog TV requires even fewer steps:

1. Go to the Menu, go to the “Broadcast” tab.
2. Just select “Auto-tune”.
3. In the menu that opens, select “Auto Configuration” again.
4. Press the “Start” key.
5. In the new window, activate the full search mode and move to the “Scanner” section.
6. Wait until all available channels are detected, click “Close” when the process is complete.

Now no one can stop you from enjoying watching television.

Setting up on LG TVs

Along with equipment from the famous company Samsung, LG systems are also popular. Let's look at how to set up digital channels on such a TV:

• Press the Menu button on the remote control (remote control).
• Find the “Settings” tab on the screen and select it.
• In the menu that opens, select the “Options” tab and click “Ok”.
• Set your country.
• Go to the “Auto search” section and confirm your choice.
• You need to select the connection type. Select “Cable”.

Important! If the system does not give you the choice of connecting to TV, repeat step 4, indicating a different country.

• We set the same frequency and other parameters as in the settings on Samsung TVs (see above).
• Click “Ok”.

If you did everything correctly, then you will have all available digital and analog TV channels.