Brown is a versatile color that has many possible uses, but it is not always found in art supply sets. Luckily, different shades of brown can be created by mixing the three primary colors: red, blue and yellow. Just mix these three primary colors and you get brown. You can also start with a secondary color, such as orange or green, and add a primary color to it until you get brown. To achieve the shade of brown you want, add more of one of the primary colors, use a little black, or mix two or more different shades.

Steps

Mix primary colors in equal proportions

Squeeze a small drop of each color onto the mixing surface. Place red, blue and yellow paints next to each other on a palette or piece of paper. The exact quantity depends on how much brown paint you need. It is important that there is an equal amount of each paint.

• Leave some space between flowers. In that free space in the middle you will mix different colors.
• To get brown from primary colors, you just need to mix them in equal quantities.

Advice: In principle, this combination can be used for oil sticks, watercolors or colored pencils, but the final color may not be uniform, since they are more difficult to mix.

Mix the colors completely. Run the tip of the palette knife along the inside edges of all three paints to bring them toward the center. Then use the flat bottom surface of the tool to mix the paints using increasingly wider circular movements. At the same time, you will notice that the mixture gradually acquires a rich brown color.

Add a little white to give the brown some depth. Once you have mixed the paints and got a brown color, add some white paint and continue mixing until it is completely gone. Be careful not to use too much white paint - generally no more than ⅓ of the total paint is needed.

How to get brown from secondary colors

1. Mix red and yellow together to make orange. Start with enough red paint and add yellow paint little by little until you reach a 1:1 ratio. At the same time, mix the paints until you get a dark orange color.

   • To make the brown color dark enough, you can use a little more red paint.

2. Mix orange with blue to get brown. Use a little less blue than orange - the proportion of blue paint should not exceed 35-40%. Mix the paints thoroughly until you get a chocolate brown color.

   Mix red and blue to get purple. Use these two colors in approximately equal proportions. The perfect combination of red and blue will produce violet, and if you deviate from the exact proportions, you will end up with purple or a similar red tint.

   • Getting the right purple color is quite difficult. If the final mixture has a reddish or bluish tint, add a little of the opposite color to achieve balance.
   • If you add too much blue paint, the purple color will be more difficult to correct. It is easier to achieve the right shade with an excess of red.

3. Add yellow paint little by little to the purple until you get a brown color. As you mix the paints, you will notice a dirty brown tint beginning to emerge. Continue adding yellow paint in small increments until you get the color you want.

   Mix blue and yellow to get green color. Squeeze out a large drop of blue and add yellow paint to it little by little. As with orange, you should start with the most saturated green and move towards the middle of the spectrum.

   • For best results, the green color should be closer to dark blue than light aquamarine.

4. Add the right amount of red paint to green to get brown. Mix in just a little red at first and continue adding and stirring as needed to get more dark color. A mixture of green and red can range from an earthy olive brown to a warm burnt orange hue.

   • To get the most “real” brown color possible, the mixture should contain 33-40% red dye. If the proportion is equal, red will slightly predominate.

   Advice: The brown color obtained from a mixture of red and green is perfect for landscapes and images of nature.

   How to get different shades

   Add a little more red or yellow paint to give the brown a warmer tone. If you want to lighten or enhance the brown, simply add a small amount of one of the warm primary colors. Add paint in small portions and stir continuously until you get the desired shade.

Burnt sienna, ultramarine, cadmium yellow - these words sound like mysterious spells to the uninitiated ear. In fact, these are just names of colors, although a certain magic is, of course, present in them. One has only to pick up a brush and apply a few drops to the palette, and the imagination immediately comes to life. And all that remains for the artist is to mix the paints correctly to create real miracles.

It is sometimes difficult for novice artists to navigate the choice of colors for their painting, especially if there are many colors in their watercolor set. This is why it is recommended to buy paints with a smaller variety of shades, because it is much more interesting and, most importantly, more useful to mix the paints yourself. Ready-made colors often turn out to be quite harsh, far from natural muted tones. But a palette created with your own hands will not only help you find what you need for the desired image, but will also serve as a source of imagination and useful knowledge.

All shades of colors are divided into warm and cold. These names are absolutely telling; warm colors are sunnier, more summery: orange, red, yellow. Cold, respectively winter, refreshing: blue, light blue, violet.

The colors on the palette interact with each other, forming absolutely incredible variations. However, there are general trends that are reflected in the so-called Itten circle. This is a model of combining primary and secondary colors.

The circle not only shows how secondary colors are formed from primary ones, but also visually divides them into warm and cold, respectively, some on the right, others on the left. It is important to understand that we are talking about base colors, not shades. After all, in comparison, some will turn out to be warmer, others colder.

Here is a small table on mixing primary colors.

Rules for mixing paints

To mix properly watercolor paints, you need to know some of their features and be sure to take them into account when applying them to paper. We are talking not only about the division into warm and cold tones, but also about the hiding power of some colors, i.e. ability to overlap previous layers. Different shades are obtained not only by mixing two colors, but also by varying their quantity, as well as the amount of water used. For example, mixing the classic combination of yellow and green, when adding more yellow it will gradually change to a lighter lime green, and may even return to the original element.

Colors that are close to each other when mixed will not give a pure tone, but with their help you can get very expressive shade, it will be called chromatic. If you combine colors located in opposite directions color wheel, then you can get an achromatic, grayish tone. For example, a combination of orange with green and purple will give this effect.

Some paints give an undesirable reaction when mixed. It's not just about dirt on the drawing, it can lead to cracking of the paint layer, as well as to its darkening when drying. The combination of zinc white with cinnabar has a beautiful light pink tone, but later this combination darkens and becomes inexpressive. Therefore, it is, of course, considered optimal to achieve brightness and multi-color by mixing a minimum number of colors. Remember that some combinations give a lasting effect, while others are completely unacceptable.

How to get yellow color when mixing paints

Yellow is one of the three basic colors, so get it by mixing pure form impossible! However, you can achieve some results by playing with shades that are close to the palette. For example, to get gold, you will need regular yellow and a drop of red or brown. A good option is also to make them yellow with red and adding white.

How to get orange color when mixing paints

Much more productive is to mix yellow paint to create orange color. It is formed from a mixture of yellow and red. Adding a little brown and red can make it tangerine or gold, depending on the amount of ingredients. Bright orange comes from classic orange with brown and white.

How to get a mint color when mixing paints

How to get black by mixing paints

Each watercolor set contains black, but if for some reason you don’t have it, or you need a very dark shade, you can mix it yourself. You will need to combine red, yellow and blue in equal proportions. Great color comes from blue and brown. Also suitable for mixing are red, green, yellow, and purple. Soft black colors come from cobalt yellow, cobalt blue and madder pink.

How to get green color when mixing paints

Green comes from yellow and blue. However, in watercolors in its pure form it is rarely used. Much more popular colors are sunny green or olive green, midnight green, their combination and other options. Solar green uses ultramarine and yellow cobalt, olive is prepared from the same flowers with the addition of burnt sienna, and midnight is made from FC blue, yellow and a drop of black.

How to get turquoise color by mixing paints

Turquoise is better known by its other name, aquamarine. On the color spectrum, its place is between green and blue. Therefore, they will be needed for mixing. You will need a slightly larger amount of blue cyan than green. However, this depends on the required color intensity. For a more subtle turquoise, you can add a drop of white or light gray paint. For a rich aquamarine, you will need to take a bright shade of blue, green and a little yellow.

How to get burgundy color when mixing paints

The burgundy color owes its name to the French wine of the same name. This is a solemn, deep color, you can mix it using three parts red and one blue. For a warmer shade, you can introduce a little yellow, or combine bright scarlet in half with brown. More cold tone It turns out from red, brown and black, it comes out so rich that it must be diluted with water.

How to get blue color by mixing paints

It’s very easy to get blue color in watercolors; just dilute ultramarine with water, and you’re done. However, for those who are not looking for easy ways, there are always a couple interesting ways. One of them is the use of white: for 2 parts of ultramarine you will need one part of white paint. You need to dilute the blue color gradually to adjust the saturation of the tone. For a bright blue color you will need the same blue, a drop of red and white. Another shade can be obtained by adding to this mixture one part of not red, but green paint.

How to get crimson color when mixing paints

Bright and energetic crimson color has a whole range of shades. The main one can be obtained by combining red, blue and a small amount of white. To tone down a too bright color, add a little black. Instead of black, you can use brown, and instead of blue, turquoise or cyan, or purple, the results will be very extraordinary.

How to get brown color when mixing paints

You can get brown color different ways. The simplest one is mixing red and green paints. It can also be made from purple and yellow, the more yellow, the lighter the tone. Another way is to use red, blue and yellow, but you need to mix them gradually, adding more paint to adjust the shade, otherwise a black color may form, especially if red and blue predominate. A good tint comes from mixing orange and blue.

How to get purple color by mixing paints

From school curriculum It is known that purple comes from red and blue colors. However, in reality this is not entirely true. It is quite difficult to obtain a high-quality bright shade, and what comes out of these two colors is more like a nondescript burgundy. So, in order for a bright, rich lilac color to come out in a company of red and blue, the latter must predominate. In this case, the shade of red should be taken as cold as possible, otherwise there is a high probability of mixing brown rather than purple. Blue also has its own requirements - it should not contain any greenish notes, take only in its pure form, for example, cobalt blue or ultramarine. To lighten the final tone, you can use a small amount of white. An important nuance is that after drying the color fades a little.

How to get blue by mixing paints

Blue is a basic color and cannot be mixed with other colors. But with the help of blue paint and auxiliary paints you can get many shades of it. For example, from bright ultramarine with white lead you can get sky blue. For a rich blue tone, take ultramarine with dark turquoise. A beautiful blue-green comes from blue with a little yellow. White will make this shade paler. The famous Prussian blue is obtained from mixing blue and green in equal parts. If you take 2 parts blue and 1 part red, you get blue-violet. And if you take pink rather than red, you get royal blue. A complex gray-blue color, excellent for drawing shadows, can be obtained from blue and brown. A rich dark blue will come out of blue and black, combining two to one.

How to get pink color by mixing paints

Usually pink color obtained from a combination of red and white, its shade will depend on the proportions. But you can also experiment with various types red The bright scarlet gives a wonderful effect, the pink color turns out to be very pure. Brick red gives a peachy tint. And bloody alizarin and white form a fuchsia color. By adding drops of purple or yellow to the mix, you can get unexpectedly interesting results. Not everyone accepts the use of white in watercolors, then you can get pink simply by diluting any red color with water. In a low concentration, this will be what you need.

How to get beige color when mixing paints

Beige or flesh color is necessary for the artist to depict people, faces, portraits, etc. Delicate beige can be obtained from white with the addition of ocher, cadmium yellow and red, sienna and sometimes ubra in minute quantities for light shading. The ratio of ocher in comparison with other components will be higher, all ingredients need to be introduced little by little, adjusting the required color intensity. Unfortunately, there is no exact recipe; each artist has his own vision of this issue.

How to get lilac color when mixing paints

The lilac color is quite close to purple, they are even called related. They are both cool shades and are quite close on the color wheel. Actually, the main recipe for lilac color is diluting purple with white or water.

How to get gray color when mixing paints

IN watercolor paintings You will never see black shadows; they are usually painted with the same colors as the rest of the details, but with the addition of a darker element, for example, gray. This color in watercolor can be obtained by combining black with a large amount of water or white. Interesting shades are obtained from cobalt blue with the addition of burnt sienna or burnt umber.

Mixing oil paints, mixing technology

Mixing oil paints has a slightly different specificity, unlike watercolor. Although the basic recipes for obtaining certain flowers are, of course, general. Basic Mixing Techniques acrylic paints:

• Combining colors on the palette, i.e. physical, to obtain a new tone or shade for the purpose of applying to a drawing. If one of the paints is lighter, then it is applied in small strokes over the dark one, provided that both paints have the same covering properties. When clear paint is mixed with opaque paint, the result is opaque paint. If two transparent paints are taken, then the result will be transparent. With this method, a decrease in the purity and intensity of tones is inevitable.
• The method of overlaying paints, otherwise known as glazing, involves layering transparent paints on top of each other directly on the image. Of course, the previous layer must be completely dry.
• Color joining method. If you apply brush strokes very tightly together, then visually mixing of these colors occurs, like a kind of optical illusion.

Oil Paint Mixing Chart

Mixing acrylic paints, technology

Acrylic paints are a great option for beginning artists and painting enthusiasts. They are universally suitable for paper, fabric, glass, wood, etc. Their only drawback is their rather high cost, and therefore acrylic sets usually do not have a very rich palette. But nothing prevents us from expanding it using mixing technology. You must have 7 colors: red, pink, yellow, blue, brown, white and black. And then, using a special table, you can easily mix acrylic yourself.

Acrylic paint mixing table

Mixing gouache paint colors

When choosing gouache, you should not focus on large sets; they look very impressive and presentable. But in fact, you will have to overpay for completely unnecessary colors. It is much better to focus not on the number of jars, but on their volume. After all, when the primary colors run out, you will still have to buy new paints, and the unused ones will remain as dead weight. Moreover, it is very easy to obtain new colors and shades of gouache, as simple as holding a brush in your hands. There are no special rules here, except that you will need a color combination table.

Gouache paint mixing table

When choosing paint for the interior, even for watercolor paintings, it is easy to make a mistake with the shade. Paper testers may not match the tone in reality.

Don't worry, there is a way to achieve the desired shade! Read on to find out what paints to mix to get blue.

In contact with

Creating a classic shade

Unfortunately, no matter what components are mixed, without the primary tone itself it will not be possible to even come close to creating the required shade .

Red and yellow colors follow the same rule.

If the color in your palette is too dark, then white paint will help to lighten it a few tones.

If, on the contrary, you need to darken the shade, then you need to add more dark tones to the mixture - black, gray or brown.

Important! If you are mixing colors to create a small pattern in the interior, then you can mix them in a small bowl by hand. If you want to paint an entire wall, tint the ingredients in a bucket using a mixer.

How to maintain proportions

How to get blue color by mixing:

1. Get delicate ultramarine by mixing blue and white parts in a 3:1 ratio.
2. To create a shade with a slight blue, increase the portion of white color. The ratio of blue to white is 2:1.
3. To obtain a more transparent, light tone, mix them in equal proportions.

WITH Hello! The heavenly color is perfect for painting a boy’s nursery.

A turquoise tone will help you get a more saturated heavenly tone.

A complex recipe of three ingredients will help you create an aqua color. How to make blue using turquoise and white? Take 2 parts blue paint, 1 part white and turquoise. Enjoy the blue of the sea.

This is interesting! Red, blue, yellow are called primary, because by mixing other tones it is not possible to achieve the desired shade. Why do you need to know what colors need to be mixed to make blue? To achieve a play of shades and original texture, create artistic masterpieces.

Dark shade

In the case when you want to make the color darker, the mixing recipe is a little more complicated. It all depends on what the final result is and how rich the tone you are trying to achieve. How to successfully mix different tones to get a dark blue color:

1. You will need two paints: black and aquamarine. If the tone is made to decorate parts, then stir the mixture with a brush or stick in a small container. To paint walls, you need to tint the shade with a construction mixer, a special attachment for an angle grinder.
2. There are no exact proportions. Add black color to the base paint drop by drop or a few milliliters.
3. It is better to test the resulting mixture on a sheet of white paper and let it dry. If you are satisfied with the shade, then stop tinting. If not, add even more black.

Advice! Did it get dark? Lighten the mass by several tones using white. Stir in gradually so you don't have to add black again.

Violet

Ultramarine is similar to artificial, which does not occur in nature. Purple will help create paint the color of a dark sky. Magic coloring will help create an interesting tone that can be used to paint the ceiling in the nursery, and bright luminous star stickers will create an imitation of the night sky. How to get blue from purple:

1. Mix blue paint with purple in proportions 3:1.
2. For the ceiling, knead the dye with a construction hook for about 10 minutes.
3. Test the finished mixture on a small section of the wall. Do not forget that you need to apply the interior color in 2-3 layers.

A woman's favorite shade is royal ultramarine.

To get such a noble tone on the verge of night blue and sea wave, you need an acidic violet color or pink. The recipe is similar to the previous tinting:

1. You will need 2 tones: acid violet (pink) and ultramarine.
2. The proportions of blue and pink are 3:1. Sometimes you need a little more pink.
3. Evaluate the result by applying the dye to a small area.

Advice! To get purple, mix red and blue in equal proportions.

From yellow

To create an emerald blue color based on ultramarine, you need yellow. The resulting shade is similar to glitter precious stones. It is appropriate to use it for decoration small elements to make a fantastic picture. How to get blue from yellow:

1. Mix yellow and ultramarine colors in equal parts.
2. For a pastel look, add white. The proportion recipe depends on the desired degree of pallor.

Advice! To create a fantastic shimmery color, do not stir the paint too thoroughly. A lazy tinting method will create an interesting mother-of-pearl effect.

From green

Prussian blue is a favorite of designers not only for interior design, but also for clothing.

The deep color is associated with the depths of the sea and a distant galaxy. How to easily turn green into blue:

1. We combine two colors: aquamarine and green in equal parts.
2. Mix using a technique to achieve uniform texture.

Surprisingly, when adding a third white ingredient, the color does not fade.

How to make paint the right shade

What if there is no main color, but you need to make blue paint? An interesting tone, similar to sapphire shine, is obtained by mixing red and green. This tinting will not give pure ultramarine, but by adding black and white paint you can achieve interesting and unusual shades.

Useful video: how to mix colors

Combine combinations of warm shades with delicate pastels, blue tones with cold ones. Change the proportions to your liking; proper tinting is the key to successful repairs. Experiment and create your own color scheme!

The color mixing table allows you to learn how to get the right one when mixing two or more colors and shades.

This table is used in various fields art - fine art, modeling, and others. Can also be used in construction when mixing paints and plasters.

Color Mixing Chart 1

Color mixing chart 2

Mixing paints
black= brown+blue+red in equal proportions
black= brown+blue.
gray and black= blue, green, red and yellow are mixed in equal proportions, and then one or the other is added by eye. it turns out we need more blue and red
black= it turns out if you mix red, blue and brown
black=red, green and blue. You can additionally add brown.
bodily= red and yellow paint... just a little bit. After kneading, if it turns yellow, add a little red, if a little yellow paint turns pink. If the color turns out to be very saturated, add a piece of white mastic and mix again
dark cherry= red + brown + a little blue (cyan)
strawberry= 3 parts pink + 1 part red
Turkiz= 6 parts sky blue + 1 part yellow
silver gray= 1 hour black + 1 hour blue
dark red= 1 part red + a little black
rust color= 8 hours orange + 2 hours red + 1 hour brown
greenish= 9 hours sky blue + a little yellow
dark green= green + a little black
lavender=5 parts pink + 1 part purple
bodily= a little copper color
nautical=5h. blue+1 hour green
peach=2h. orange + 1 tsp. dark yellow
dark pink=2h. red+1 hour brown
Navy blue=1h. blue+1h. Sereneviy
avocado= 4h. yellow + 1 part green + a little black
coral= 3 hours pink + 2 hours yellow
gold= 10 hours yellow + 3 hours orange + 1 hour red
plum = 1 part purple + a little red
light green= 2 hours purple + 3 hours yellow

red + yellow = orange
red + ocher + white = apricot
red + green = brown
red + blue = violet
red + blue + green = black
yellow + white + green = citric
yellow + cyan or blue = green
yellow + brown = ocher
yellow + green + white + red = tobacco
blue + green = sea ​​wave
orange + brown = terracotta
red + white = coffee with milk
brown + white + yellow = beige
light green=green+yellow, more yellow,+white= light green

lilac=blue+red+white, more red and white, +white= light lilac
lilac= red and blue, with red predominating
Pistachio paint obtained by mixing yellow paint with a small amount of blue

The paint mixing table allows you to create a huge palette of bright shades from 3 basic colors. It is very exciting! The main thing is to choose the right paints according to the color mixing table.

Artist's Workshop: Magic Lessons

1. The combination of two adjacent colors of the spectrum produces shades with different intensities of these colors. For example, yellow and orange when superimposed produce yellow-orange or orange-yellow, depending on which of these 2 colors predominates. If you mix in equal proportions 3 shades located next to each other on the color wheel, for example, yellow, red and orange, you will get the same orange, but dirtier.

2. When white is added to any color, it produces pastel shades of varying intensity.

3. By mixing 2 primary colors in equal proportions, which are separated by 1 shade on the color wheel, we get exactly the intermediate color that separates them. For example, red + blue = purple.

4. An equal combination of 2 contrasting colors (located opposite each other on the color wheel) always produces gray with a tint of one of these colors. For example, red + green, blue + orange, etc. Interestingly, if you mix complementary colors in a 2/1 ratio, you get absolute gray (without additional shades).

5. 3 primary colors located next to each other, when applied in equal proportions, also form gray, for example, green + yellow + orange. Pay attention to the striking pattern: harmonious color combinations (which you can get using the color wheel) when mixing those included in them give shades grey colour- balancing, they absorb each other.

Creating new colors using a paint mixing table

As we already know, there are only 3 colors that cannot be obtained by mixing others. But from them you can create all other shades. These magical colors are red, yellow and blue. By the way, by mixing them with each other in equal proportions, you can get black. How to create all the other shades of the palette, see the table:

The color mixing table and color wheel are used not only in painting, they are simply irreplaceable when tinting and mixing decorative plaster in construction, in perfumery and soap making, when dyeing fabrics, batik, etc.

Color spectrum: revealing the secrets of the rainbow

Isaac Newton, passing light through a prism, received a multi-colored beam called a spectrum. For the convenience of combining colors, a continuous line of the spectrum with all its transitional tones was turned into a circle. As you know, in the color spectrum there are three primary shades (red, blue and yellow), and when they are mixed in pairs with each other, three more secondary shades are obtained (green, orange and purple). It is these 6 shades that form the color wheel, and each of them has complementary colors (blue and red-violet, yellow-green, purple, red and yellow-orange, blue and yellow-green). Newton, by the way, identified 7 colors, adding blue to the spectrum, which, along with the six main ones, is considered the color of the rainbow. By mixing these shades, making them darker or lighter to varying degrees, you can get a full range of colors.

I would like to immediately make a reservation that the division of the spectrum is arbitrary and depends on the characteristics of our perception. A person can identify up to 1000 tones in the color spectrum. It is interesting that reptiles and birds do not distinguish blue shades, and some fish see everything around them in red. It is believed that for cats the colorful world around us looks dimmer, but they can distinguish a huge variety of shades of gray.

Color spectrum table

The colors of the spectrum are called chromatic, as opposed to achromatic (from Latin, “without color”): white, black, gray. The order of shades in the spectrum is always the same, starting with red and ending with violet.

Shades on the color wheel from green-blue to blue-violet are considered cool, from yellow-green to red-violet - warm. This division is quite arbitrary and depends on what associations these colors evoke in us: red-orange fire, yellow sun, blue ice, blue ocean abyss. Did you notice that when we separated colors we didn't mention green? And this is no coincidence. Pure green (which, by the way, is extremely rare) is considered neutral. A drop of yellow makes it warmer, a drop of blue cools it down.

The color wheel is extremely important in a designer's work. With its help, you can not only determine harmonious color combinations, create the desired atmosphere in the room or an attractive image, but also influence perception by skillfully emphasizing the brightness, purity, beauty of color, enhance its intensity by adding complementary shades, balance cold tones with warm ones, etc. d. This magic is not difficult to learn even without being a designer, and it can be used not only in interior or clothing design. With the help of the color wheel, anyone can create harmony in the apartment, correctly combine colors in clothes, manicure, makeup, etc. For example, blue eyes will be emphasized by orange-coral lipstick or peach eye shadow, and a scarlet dress will be refreshed by a green-turquoise scarf.