Added to the site:
Job description
engineer (expert, senior engineer) for labor protection and safety
[name of organization, enterprise, etc.]
This job description has been developed and approved in accordance with the provisions Labor Code Russian Federation and other regulations governing labor relations in the Russian Federation.
I. General provisions
1.1. A labor protection engineer belongs to the category of specialists; he is hired and dismissed by order of the director of the enterprise upon the recommendation of the head of the labor protection department.
1.2. A person who has a higher professional (technical) education and work experience as a category II occupational safety engineer of at least [value] years is appointed to the position of labor protection engineer of category I; for the position of category II occupational safety engineer - a person with a higher professional (technical) education and work experience in the position of occupational safety engineer or other engineering positions filled by specialists with higher professional education of at least [value] years; for the position of occupational safety engineer
A person who has a higher professional (technical) education, without presenting requirements for work experience, or a secondary vocational (technical) education and work experience as a technician of category I for at least [value] years or other positions filled by specialists with a secondary professional (technical) education, at least [meaning] years.
1.3. The labor protection engineer reports directly to the head of the labor protection department.
1.4. In his activities, a labor protection engineer is guided by:
Legislative and regulatory documents addressing labor safety issues;
Methodological materials relating to relevant issues;
Charter of the enterprise;
Labor regulations;
Orders and instructions of the director of the enterprise (direct manager);
This job description.
1.5. The occupational safety engineer must know:
Legislative and regulatory legal acts, teaching materials on labor protection issues;
Basic technological processes production of enterprise products;
Methods for studying working conditions in the workplace;
Organization of work on labor protection;
System of occupational safety standards;
Psychophysiological requirements for workers, based on the category of severity of work, restrictions on the use of labor of women, adolescents, workers transferred to light work;
Features of the operation of equipment used at the enterprise;
Rules and means of monitoring compliance of the technical condition of equipment with the requirements for safe work;
Advanced domestic and foreign experience in labor protection;
Methods and forms of propaganda and information on labor protection;
The procedure and timing for reporting on the implementation of labor protection measures;
Fundamentals of economics, organization of production, labor and management;
Basic issues of labor legislation.
1.6. During the absence of a labor protection engineer (vacation, illness, etc.), his job responsibilities performs in in the prescribed manner appointed deputy who bears full responsibility for high-quality, efficient and timely implementation.
II. Functions
The occupational safety engineer is assigned the following functions:
2.1. Monitoring compliance with legislative and other regulatory legal acts on labor protection.
2.2. Development of measures to prevent occupational diseases and accidents at work.
2.3. Methodological support for relevant issues.
2.4. Submission of established reports.
III. Job responsibilities
To perform the functions assigned to him, the labor protection engineer is obliged to:
3.1. Monitor compliance in departments of the enterprise with legislative and other regulatory legal acts on labor protection, and provide employees with established benefits and compensation for working conditions.
3.2. Study working conditions in the workplace, prepare and make proposals for the development and implementation of more advanced designs of fencing equipment, safety and locking devices, and other means of protection from the effects of hazardous and harmful production factors.
3.3. Participate in inspections and surveys of the technical condition of buildings, structures, equipment, machines and mechanisms, the efficiency of ventilation systems, the condition of sanitary facilities, sanitary facilities, collective and personal protection workers, determining their compliance with the requirements of regulatory legal acts on labor protection and, when identifying violations that pose a threat to the life and health of workers or may lead to an accident, take measures to stop the operation of machines, equipment and work in workshops, areas, and workplaces .
3.4. Together with other departments of the enterprise, carry out work on certification and certification of workplaces and production equipment for compliance with labor protection requirements.
3.5. Participate in the development of measures to prevent occupational diseases and industrial accidents to improve working conditions and bring them to the requirements of regulatory legal acts on labor protection, as well as provide organizational assistance in the implementation of the developed measures.
3.6. Monitor the timeliness of the relevant services carrying out the necessary tests and technical examinations of the condition of equipment, machines and mechanisms, compliance with schedules for measuring the parameters of dangerous and harmful production factors, compliance with the instructions of state supervisory authorities and monitoring compliance with current norms, rules and instructions on labor protection, labor safety standards in the production process, as well as in projects of new and reconstructed production facilities, to participate in their acceptance into operation.
3.7. Participate in the consideration of the issue of compensation by the employer for harm caused to employees by injury, occupational disease or other damage to health related to the performance of their work duties.
3.8. Provide methodological assistance to enterprise departments in compiling lists of professions and positions, in accordance with which employees must undergo mandatory medical examinations, as well as lists of professions and positions, in accordance with which, on the basis of legislation, workers are provided with compensation and benefits for difficult, harmful or dangerous working conditions ; when developing and revising labor safety instructions, enterprise standards, a system of labor safety standards; on organizing briefing, training and testing the knowledge of workers on labor protection.
3.9. Conduct introductory briefings on labor protection with all newly hired, business travelers, students and students arriving for on-the-job training or internship.
3.10. Participate in the drafting of the “Occupational Safety and Health” section of the collective agreement, in the investigation of cases of industrial injuries, occupational and work-related diseases, study their causes, and analyze the effectiveness of measures taken to prevent them.
3.11. Monitor the organization of storage, issuance, washing, dry cleaning, drying, dust removal, degreasing and repair of special clothing, special footwear and other personal protective equipment, the condition of safety devices and protective devices, as well as the correct expenditure in the departments of the enterprise of funds allocated for the implementation of occupational safety measures.
3.12. Prepare labor safety reports in established forms and within appropriate time frames.
3.13. [Enter as appropriate].
IV. Rights
A labor protection engineer has the right:
4.1. Get acquainted with draft decisions of the enterprise management concerning its activities.
4.2. Submit proposals for improvement of work related to the responsibilities provided for by these instructions for consideration by the enterprise management.
4.3. Receive information and documents from heads of structural divisions, specialists on issues within his competence.
4.4. Involve specialists from all structural divisions of the enterprise to resolve the responsibilities assigned to it (if this is provided for by the regulations on structural divisions, if not, then with the permission of the head of the enterprise).
4.5. Require the management of the enterprise to provide assistance in the performance of their official duties and rights.
4.6. [Enter as appropriate].
V. Responsibility
The occupational safety engineer is responsible for:
5.1. For failure to perform (improper performance) of one’s official duties as provided for in this job description, within the limits specified labor legislation Russian Federation.
5.2. For offenses committed in the course of carrying out their activities - within the limits determined by the administrative, criminal and civil legislation of the Russian Federation.
5.3. For causing material damage - within the limits determined by labor, criminal and civil legislation of the Russian Federation.
The job description has been developed in accordance with [name, number and date of document].
Head of structural unit
[initials, surname]
[signature]
[day, month, year]
Agreed:
Head of Legal Department
[initials, surname]
[signature]
[day, month, year]
I have read the instructions:
[initials, surname]
[signature]
[day, month, year]
Responsibilities of a labor protection engineer: 8 main + 2 additional + regulatory framework + 6 main requirements + estimated wages + favorite aphorism of representatives of the profession.
Are you wondering what dear Ivan Petrovich, proudly called a labor safety engineer, does all his working day at your plant? Or are you not averse to mastering this profession?
Then turn off cat videos on the Internet (yes, yes, we ourselves dearly love these furry scoundrels) and Learn about the main responsibilities of a safety engineer.
10 chapters of one story: 8 main and 2 additional responsibilities of a labor protection engineer
We’ll immediately disappoint those who are thinking of throwing their weight around in this position: you will have plenty of responsibilities!
1) 7 things that you will definitely have to do if you decide to become a labor protection specialist.
- The engineer is also responsible for interacting with regulatory authorities(firemen, labor inspection, Rospotrebnadzor, Rostechnadzor). You will have to “love and favor” all these gentlemen during the inspection, and also monitor the implementation of their instructions.
Develop and implement an internal safety regulatory framework.
No, general laws at work - this is, of course, excellent, but when you need to issue a fine for the fact that your Kolyan is working with a welding machine without a protective mask, local instructions are just the thing.
Prepare various seminars and trainings on labor protection for employees.
At the same time, learn how to make presentations in Power Point, speak in public and see if you would turn out to be the next Sukhomlinsky, or if pedagogy is clearly not your thing.
Another responsibility of such an engineer is to organize medical examinations of workers (if necessary) and monitor their implementation.
And don’t be a freeloader, otherwise dear Zoya Semyonovna, who is embarrassed to wear glasses at 51 years of age, will take and “add” some kind of tourniquet on the assembly line incorrectly, and then the whole company will take the rap for the poor quality of the product.
Investigating accidents that happen to employees in the workplace is not a very pleasant, but very responsible duty for a specialist.
Bloody nose, you need to figure out how to make sure this doesn’t happen again.
Conduct preparation and certification of workplaces for compliance with safety standards.
And no sparking wires, falling tables or collapsing machines!
Assists department heads in drawing up documents on benefits and special payments for those who work in hazardous working conditions.
So representatives of everyone dangerous professions they coo gently with those responsible for labor protection, “beating out” salary increases for them.
Brings to the bright minds of management the ideas of employees that relate to the safety of the work process.
2) Labor protection engineer: 2 “pleasant” bonuses to duties.
If you have read the 8 main tasks that an occupational safety specialist must cope with and have not yet been horrified, then you will notice 2 additional responsibilities of an engineer:
prepare statistical reports to inspection authorities.
Information about who needs to submit what documents and in what time frame can be found at the following link: https://blog-engineer.rf/oxrana-truda/report-on-labor-safety-and-ecology.html
work on commissions that test employees’ knowledge of occupational health and safety.
And if six months ago Yegorych took the last cutlet in the canteen from under your nose, the time has come to take revenge on him with a tricky question.
The responsibilities of a labor safety engineer are good, but where are the rights? or 3 “magic powers” of a specialist
An engineer can check the workplace for compliance with labor legislation.
Hmm, practically American special forces, ready to break into the house at any second.
The engineer has every right to study any documents that indicate the technical characteristics of equipment or production organization.
You have every chance to be not only damn attractive, but also perfectly knowledgeable about all work processes.
6 basic requirements for a specialist: in the “load” of the duties of a labor protection engineer
Since such an engineer has serious responsibilities - a carriage and a small cart, the requirements for a labor protection specialist are appropriate:
Higher professional education.
And there’s no need to grimace as if from a slice of lemon: labor protection is much more than “Don’t put your fingers in the socket!”, “Don’t swing your knife like nunchucks!” and “Don’t change light bulbs with the lights on!”
As a rule, those who have already mastered the profession of engineer become specialists in this field, since the corresponding subject is taught in all technical universities. Also, some institutes offer a specialty in “Life Safety.”
Knowledge of laws and regulations that regulate labor protection.
So that when some crazy industrial climber wants to wash windows on the third floor without insurance (like, how high is this height?), you point your finger at the right paragraph and remove your “birdie” from the pole.
Therefore, those who want to properly study the responsibilities of an occupational safety engineer should read at their leisure not paperback detective stories, but the following documents:
| No. | Name of the normative act |
|---|---|
| 1 | Constitution of the Russian Federation |
| 2 | Labor Code of the Russian Federation |
| 3 | Federal Law of July 17, 1999 N 181-FZ "On the basics of labor protection in the Russian Federation" |
| 4 | Federal Law of December 27, 2002 N 184-FZ "On Technical Regulation" |
| 5 | Federal Law of January 12, 1996 N 10-FZ “On trade unions, their rights and guarantees of activity” (as last amended and supplemented on May 9, 2005) |
| 6 | Federal Law of July 24, 1998 N 125-FZ “On compulsory social insurance against accidents at work and occupational diseases” (as last amended and supplemented on December 22, 2005) |
| 7 | Federal Law of March 30, 1999 N 52-FZ “On the sanitary and epidemiological welfare of the population” (as last amended and supplemented on December 31, 2005) |
| 8 | Federal Law of July 25, 2002 N 115-FZ "On legal status foreign citizens in the Russian Federation" (as last amended and supplemented on July 18, 2006) |
| 9 | Decree of the Government of the Russian Federation of January 28, 2000 N 78 “On the Federal Labor Inspectorate” (as amended and supplemented on January 8, 2003) |
| 10 | Decree of the Government of the Russian Federation of December 15, 2000 N 967 "On approval of the Regulations on the investigation and recording of occupational diseases" |
Often, such an engineer is also required to have successful experience in passing inspections and communicating with representatives of regulatory authorities.
And no, we are not talking about the ability to “cover the clearing” for inspectors, but about the ability to avoid serious violations in labor safety.
A good specialist cannot do without confident command of a personal computer and office equipment.
How else are you going to print out safety instructions for your idiot builders?
Many employers will be simply happy if the person applying to act as a safety engineer already has experience in handling accidents at the enterprise.
Because if, God forbid, something happens, you will need at least someone with cool head, and not a whole crowd of alarmists.
Ideally, such an engineer should have minimal pedagogical inclinations or.
Tell me it doesn't matter? Just try to force a 50-year-old man to put a helmet on his head for the first time in his life and not tell everyone to go to hell.
Occupational safety engineer: responsibilities - responsibilities, but how much do they pay for it?
The salary of an engineer responsible for occupational safety at work depends on:
type of activity.
You understand: it’s one thing when workers quietly and peacefully sort walnuts, and a completely different story when they “plow” at a metallurgical plant
enterprise scale.
Oh, you won’t see such a salary that once - and you are like that in the Maldives - if you work in a tiny confectionery shop;
region of residence.
And here Muscovites and residents of big cities can boast of a good salary, smiling slyly into their mustaches.
Based on these factors, an engineer’s salary ranges from 18 to 120 thousand rubles (on average 35-45 thousand)
Don't know the difference between occupational health and safety?
You will find a detailed answer to this question here:
Responsibilities of a labor protection engineer: all the “salt” in one aphorism
In order to meet "in wildlife» occupational safety specialist, don’t just inquire about his duties, but also pass for one of your own, learn the favorite saying of all representatives of the profession:
Now, having learned from our short educational program: “ Labor safety engineer: responsibilities and other “tricks” of the profession,” you will not reproach that same Ivan Petrovich from work with a piece of bread, and maybe you yourself will want to become a cool specialist in this field.
Useful article? Don't miss new ones!
Enter your email and receive new articles by email
JOB DESCRIPTION
occupational safety engineer
labor protection services
1.General provisions
1.1. Job title: Occupational Safety and Health Service Engineer.
This instruction has been compiled on the basis of the “Regulations on the development of job descriptions”, put into effect by Order of the Ministry of Energy of Ukraine No. 21-T, the “Regulations on the Labor Safety Service of an Electric Networks Enterprise”, approved on 04/08/96 and the “Directory of Qualification Characteristics of Employees”.
1.2.Knowledge of these instructions is required for:
- HSE engineer for labor protection;
- Deputy Director for Labor Protection;
- Deputy Head of SOT.
1.3. The main goal of the occupational safety engineer’s activities is to resolve safety issues when organizing work in departments of the enterprise, to monitor the implementation of organizational and technical measures that ensure the safety of work in electrical installations and aimed at preserving the health and life of workers; assessing the provision of personnel with protective equipment and monitoring the timeliness of testing of the protective equipment used; participation in the process of professional training and advanced training of workers on labor protection issues, work with personnel aimed at instilling professional responsibility and production discipline in the employees of the enterprise to prevent injuries.
1.4. An occupational safety engineer must have a higher technical education in an electrical power specialty, work experience in engineering and technical positions in a production profile for at least three years, group 5 in electrical safety.
A labor protection engineer is appointed and dismissed from his position by order of the enterprise.
1.6. The labor protection engineer reports in his activities to the deputy director for labor protection.
1.7. The knowledge of a labor protection engineer is checked in the prescribed manner before he begins to perform his functional duties and periodically once every three years. Certification for suitability for the position held takes place once every five years.
1.8. The workplace of a labor protection engineer is located in the administrative building of the electrical networks enterprise. The service area of the occupational safety engineer is all enterprise facilities with equipment installed on them.
1.9. The labor protection engineer has an irregular working day.
1.10. In his daily activities, a labor protection engineer must know the procedure for conducting inspections of departments on labor protection issues, the procedure for monitoring compliance with the requirements of directive documents, the nomenclature of service affairs, the procedure for conducting them, the technical and economic indicators of the enterprise, the territorial location of the enterprise’s facilities.
1.11. An occupational safety engineer must be able to use computer and copying equipment located in the occupational safety service.
2. Qualification requirements for an occupational safety engineer.
Higher technical education in the electrical power specialty, work experience in engineering and technical positions in the production profile for at least three years, group 5 in electrical safety.
3. The occupational safety engineer must know.
3.1. Laws of Ukraine “On labor protection”, “On compulsory state social insurance against accidents at work and occupational diseases that resulted in loss of ability to work”, “On fire safety”, ; sectoral and intersectoral regulatory documents on labor protection, equipment operation and fire safety, security traffic, current regulatory and technical documents on the safe organization of work, occupational safety management system, job descriptions of subordinate personnel, ;
3.2. Resolutions, instructions, orders of higher authorities, methodological, regulatory and other guidance materials on labor protection, equipment operation, fire safety, road safety;
3.3." "DNAOP 1.1.10-1.01-97;
3.4. "Technical operation of power plants and networks. Rules" GKD 34.20.507-2003;
3.5." "DNAOP 1.1.10-1.04-01;
3.6 "Rules for the use of electrical protective equipment" DNAOP 1.1.10-1.07-01;
3.7." "DNAOP 0.00-1.03-02;
3.8 "Rules for the design and safe operation of pressure vessels" DNAOP 0.00-1.07-94;
3.9. "Fire safety rules in Ukraine" NAPRB A.01.001-2004;
3.10. "Rules for electrical installations" UDC 621.31.002.5
3.11. "Regulations on the procedure for training and testing the knowledge of employees of electric power industry enterprises on labor protection, fire safety and technical operation" (SOU-N MPE 40.1.12.103:2005);
3.12 "Rules for the design and safe operation of lifts" NPAOP 0.00-1.36-2003;
3.13. "The procedure for investigating and maintaining records of accidents, occupational diseases and accidents at work", approved by the resolution of the Cabinet of Ministers of Ukraine dated 08.25.04. No. 1112;
3.14. “The procedure for investigating and recording non-production accidents”, approved by the resolution of the Cabinet of Ministers of Ukraine dated March 22, 2001. No. 270;
3.15. "Fire safety rules in companies, enterprises and organizations of the energy industry of Ukraine" (NAPB V.01.034-2005/111);
3.16 "Instructions for providing first aid to victims in connection with accidents during the maintenance of power equipment" NAOP 1.1.10-5.05-86;
3.17. Fundamentals of economics, organization of production, labor and management;
3.18. Fundamentals of labor legislation;
3.19. “Occupational safety management system at electric power enterprises of the Ministry of Fuel and Energy of Ukraine” (SOU-A MPE 40.1.03.107-2004);
3.20. Internal labor regulations;
3.21. Ukrainian to the extent necessary to perform official duties.
4. Functions and responsibilities of a labor protection engineer.
The occupational safety engineer performs the following main functions and responsibilities:
4.1. Operational and methodological guidance in organizing safe work and monitoring the implementation of a set of necessary organizational and technical measures in the preparation of workplaces.
4.2.Increasing the qualifications of workers on labor protection issues, safe organization of work, promoting experience and methods of accident-free work.
4.3. Development of new, revision or cancellation of existing orders and instructions on labor protection issues.
Labor safety engineer:
4.4. Exercises control:
- organizing safe work in the workplace;
- correct execution of work permits;
- availability of labor protection documentation in departments, its completeness, compliance with regulatory requirements;
- organizations in personnel departments;
4.5. Based on the results of inspections, issues orders to departments to eliminate identified violations.
4.6.Keeps records of industrial accidents in the Ministry of Fuel and Energy, in oblenergos, in electric network enterprises; deals with the analysis of the causes leading to accidents, and also develops measures to eliminate them and prevent accidents.
4.7. Participates in on-site accident investigations.
4.8. Conducts introductory briefings for new employees;
4.9. Organizes and monitors the timely completion of periodic medical examinations of workers of all categories subject to medical examinations (engaged in heavy work and work with harmful and dangerous working conditions or those where there is a need for professional selection).
4.10. Participating:
- in the work of commissions when testing knowledge of labor protection, industrial safety regulations, technical regulations of enterprise employees;
- in the work of commissions during the conduct of republican days of labor protection in the divisions of the electrical network enterprise;
- in the development of labor protection instructions;
- in carrying out work to improve the skills of workers in matters of labor protection.
4.11. Prepares draft orders, instructions and instructions on labor protection issues.
4.12. Analyzes and processes information received by the SOT on inspection of workplaces, on holding occupational safety days, on the implementation of planned activities.
4.13. Prepares reports to higher and supervisory organizations on the implementation of their instructions, as well as the requirements of orders and instructions.
4.14. Provides methodological assistance to heads of structural units in the development of measures on labor protection issues operating within the unit.
4.15. Monitors the timeliness of training and instruction of workers, testing of knowledge on labor protection issues of managers and specialists, workers performing high-risk work, special work, monitoring compliance with safety requirements when performing these works.
4.16. Maintaining connections with medical institutions, SES, Social Accident Insurance Fund and other organizations, participating in the implementation of their recommendations.
4.17. Checking the state of safety, occupational hygiene, industrial sanitation at enterprise facilities.
4.18. Development, together with services and departments, of comprehensive measures to achieve established standards of safety, occupational health, and industrial sanitation.
5. Rights of a labor protection engineer.
A labor protection engineer has the right:
5.1. Demand from officials the necessary information, documents and explanations (written or oral) and other materials about violations of rules, norms and standards relating to safety and labor protection issues.
5.2.On behalf of the management of the labor protection service, represent the enterprise in state and public institutions when considering labor safety issues.
5.3. At any time, freely visit production facilities, structural divisions of the enterprise, suspend the operation of areas, equipment and other structures in case of detection of violations that pose a threat to the life or health of people, as well as causing damage to equipment or a fire.
5.4. Inspect the state of labor protection in departments and areas of the enterprise, issue to the managers of inspected facilities mandatory instructions in the established form.
5.5. Make proposals to the management of the service to punish workers who violate rules, norms, and standards relating to labor protection, and apply for incentives for workers who take an active part in improving working conditions and do not allow violations when performing work.
5.7. Demand that officials remove from work workers who have not undergone a medical examination, training, instruction, testing of knowledge on labor protection, who do not have access to special work, or who violate labor safety regulations.
6. Relationships.
In the process of performing functional duties, the labor protection engineer maintains relationships with managers and specialists of services and departments of the electrical network enterprise:
6.1.With the heads of departments - on issues of ensuring the safe performance of work, reducing the level of injuries and errors when carrying out work in the structures of the electrical network enterprise.
6.2.Fulfills orders received from the management of the SOT, as well as directly from the director of the enterprise, the chief engineer and their deputies.
6.3. Reports to the management of the SOT on all disagreements that have arisen between him and the heads of departments.
6.4. Provides information to the Oblenergo SOT on the implementation of measures according to orders, regulations, and on the state of injuries at the facilities of the electrical network enterprise.
6.5. Informs the management of the electrical network enterprise about cases of violations of PBEE, PTEEiS, PPB, instructions, and other regulatory documents.
7. Responsibility of the labor protection engineer
The occupational safety engineer is responsible for:
7.1. Inconsistency of the decisions made by him with the requirements of the current legislation on labor protection.
7.2. Failure to fulfill one’s functional duties as provided for in these instructions.
7.3. Unreliability of information, untimely preparation of materials and reports on the state of labor protection at the enterprise.
7.4. Low quality of inspection of inspection objects and accident investigations.
I APPROVED
Yu.P.Sorokin
(Full name)
Head of the Moscow State Unitary Enterprise Trust
"Mosotdelstroy No. 1"
JOB DESCRIPTION
Health and Safety Engineer
1. GENERAL PROVISIONS
1.1. This job description defines functional responsibilities, rights and responsibilities of the Labor Safety Engineer.
1.2. A labor safety engineer is appointed and dismissed in accordance with the procedure established by current labor legislation by order of the head of the enterprise.
1.3. The labor protection engineer reports directly to the chief engineer.
1.4. A person with a higher technical education and work experience is appointed to the position of Labor Safety Engineer. engineering positions in construction organizations at least three years or secondary technical education and work experience in engineering positions in construction organizations for at least three years.
1.5. The occupational safety engineer must know:
— legislative and regulatory legal acts, methodological materials on labor protection issues;
— the main technological processes of production of the enterprise’s products;
— methods for studying working conditions in the workplace;
— organization of work on labor protection;
— system of labor safety standards;
— psychophysiological requirements for workers based on the category of severity of work, restrictions on the use of labor by women, adolescents, and workers transferred to light work;
— features of operation of equipment used at the enterprise;
— rules and means of monitoring compliance of the technical condition of equipment with the requirements for safe work;
— advanced domestic and foreign experience in labor protection;
— methods and forms of propaganda and information on labor protection;
— the procedure and timing of reporting on the implementation of labor protection measures;
— fundamentals of economics, organization of production, labor and management;
— basics of labor legislation.
2. FUNCTIONAL RESPONSIBILITIES
Labor safety engineer:
2.1. Monitors compliance in departments of the enterprise with current legislation, instructions, rules and regulations on labor protection, safety precautions, industrial sanitation and fire protection.
2.2. Provides departments of the enterprise and construction sites with information and methodological literature on safety issues and safety instructions taking into account local conditions.
2.3. Conducts introductory training for workers and line engineers on health and safety measures when hiring. Issues certificates for the right to work to the work manufacturer.
2.4. Takes part in the work of commissions to test employees’ knowledge of occupational health and safety rules.
2.5. Timely send workers and engineers to the Training Center for training and testing knowledge of safety rules and certification under the relevant articles for the right to work with construction machines, mechanisms, and electrical equipment.
2.6. Within a month (twice a month), he visits each construction site, checks compliance with labor and safety regulations when performing specialized installation and finishing works, as well as the application by employees of rules and personal safety measures when operating machines, small-scale mechanization and mechanized power tools.
2.7. Checks that general contractors have work projects and technological maps and their reflection of safety requirements. Monitors the presence of fences, warning signs and posters at facilities.
2.8. Monitors regular safety training of engineers and workers and ensures proper maintenance of training logs. If necessary, personally conducts unscheduled safety briefings for workers and engineers.
2.9. Controls the appointment of those responsible for the operation of machines, mechanisms and electrical equipment at facilities (from among the engineering and technical personnel) certified under the relevant articles. Checks whether workers and engineers have a certificate authorizing them to perform work.
2.10. Monitors compliance with work permits for performing work associated with increased danger.
2.11. Monitors the correct storage of structures, products and materials, as well as the cleanliness and order of work places, aisles and household premises. Promptly informs the enterprise management about all violations of labor and safety rules at the facilities and takes measures to eliminate them.
2.12. Issues instructions in the established form on safety precautions to linear engineers. In which he sets deadlines for eliminating the noted deficiencies and monitors the implementation of instructions. In the event that site managers and superintendents do not take measures to eliminate identified deficiencies, prepares reports addressed to the head of the trust or the chief engineer with proposals to eliminate violations and punish those responsible.
2.13. Conducts regular discussions and reviews with workers of cases of violations of safety regulations and the reasons that led to them. Participates in the investigation of accidents, injuries and accidents. Studies their causes and develops measures to prevent them.
2.14. In the event of fatal accidents, notifies the State Labor Inspectorate and, together with it, conducts an investigation with the preparation of relevant acts/in Form N-1.
2.15. Represents the interests of the enterprise in judicial investigations accidents and incidents, as well as when determining damage received by trust employees in connection with industrial injuries, injuries and occupational diseases.
2.16. Organizes annual medical and sanitary examinations of the trust's workers. Prepares and approves at the Moscow City Sanitary and Epidemiological Station a list of hazardous professions and the timing of medical examinations, and also prepares necessary documents for delivery to the clinic.
2.17. Controls the provision of benefits due to workers for harmful and difficult working conditions, as well as the provision of benefits to workers under 18 years of age.
2.18. Monitors the provision of workers with special clothing, safety footwear, personal protective equipment and medicines.
2.19. Monitors the implementation of occupational health and safety measures and the creation of healthy and safe working conditions for employees as provided for in the collective agreement.
2.20. Monitors compliance with the rules for storing materials and products in warehouses, paying attention to special attention storage of flammable and explosive substances / fuels, lubricants and paints, compressed gas cylinders, etc./
2.21. Systematically conducts inspections of administrative buildings and industrial premises of the trust and construction sites in order to verify compliance with fire safety rules and measures, monitors the availability and serviceability of fire-fighting equipment.
2.22. Provides methodological and practical assistance to employees on occupational health and safety issues.
2.23. Prepares orders for the appointment of those responsible for safety and fire safety in the departments of the trust, for the creation and composition of occupational health and safety commissions, and for conducting examinations on knowledge of safety rules.
2.24. Prepares monthly necessary certificates and reports on his area of work for the management of the trust and higher authorities.
2.25. Prepares cost estimates for annual health and safety activities and monitors the intended use of allocated funds.
3. RIGHTS
3.1 The labor protection engineer has the right:
3.1.1. Monitor compliance with labor protection requirements in the company's departments.
3.1.2. Conduct inspections and checks of the technical condition of buildings, structures, equipment, machinery and mechanisms, ventilation systems, etc. to determine their compliance with established standards and safety requirements.
3.1.3. Carry out, together with other departments, certification of workplaces and production equipment for compliance with labor protection standards.
3.1.4. Participate in the development of proposals and activities aimed at improving occupational safety.
4. RESPONSIBILITY
4.1. The occupational safety engineer is responsible for:
4.1.1. Failure to fulfill one's functional duties.
4.1.2. Inaccurate information about the status of fulfillment of received tasks and instructions, violation of deadlines for their execution.
4.1.3. Failure to comply with orders, instructions from the director of the enterprise, instructions and assignments of the head of the department.
4.1.4. Violation of internal labor regulations, fire safety and safety regulations established at the enterprise.
5. WORKING CONDITIONS
5.1. The work schedule of the Labor Safety Engineer is determined in accordance with the Internal Labor Regulations established at the enterprise.
I have read the instructions: ___________________ __________________
(signature) (full name)
"___"_________ ____ G.