If you mix green and yellow colors in equal proportions, you get a color that we usually call light green. Depending on how light or dark the original colors are, the result will vary from light green to olive.
But if you mix green and yellow in clothes, nothing good will come out) This combination can only be worn by representatives of the winter color type, and even then it’s not worth it)
If we take yellow as a base and add green paint, we get light green color or shade, since everything will depend on the amount of paint you want to add to the base color.
If you want to continue the experiment, you can add a little white paint to the light green one and get a lighter and less saturated color.
Yellow will give green the opportunity to sparkle with a variety of shades. There will be less yellow - the green will only become slightly brighter, more golden, but if there is more, then it will be possible to increase green color to light green. In general, decide what color you want to get as a result - more yellow or more green, and depending on this, select the desired proportion of mixed colors.
Light green color can be used to paint fresh grass and leaves. It will give the picture a juicy spring character.
Mixing green and yellow dyes will also be useful for cooks: it is this light green color that is most often found on flower petals on cakes.
If you mix any two paints, you can get many different shades. Moreover, depending on how much of one paint is mixed with another, the resulting color approaches either one or another color.
If we have two colors: yellow and green, then color mixing in equal proportions will give light green color.
If you gradually add green paint to yellow paint, you can see how the resulting paint changes its color, getting closer to green with each new drop.
Knowing how to get a particular color correctly, you can create completely unexpected shades. And if you add yellow and green paint one more color, then you can get, for example, the following colors:
The answers to this question will be different if you do not ask the exact characteristics. The final color when mixing yellow and green depends on their initial shades and saturation. This can be clearly seen from the figure below.
If we mix light green and light yellow, we get a soft light green color.
If we mix rich green and yellow, we get a rich light green color.
If we mix dark green and dark yellow, we get olive color. It can also be intensified to dark olive.
By the way, in life the combination of yellow and green is quite acceptable, for example, in clothes these colors go well together and refresh a woman, and are also acceptable for a man, although they are used less often. The same can be said about their use in the interior of, say, a bedroom.
It will turn out to be an acidic, poisonous light green color - well, that’s just in my personal opinion!)
If you mix yellow and green, you get blue. Depending on the proportions of the colors mixed, the shade of blue will change. If you add more green, you get a dark blue color. And if yellow color and if there is more, it will turn out blue.
Mixing green with any other colors always results in a color close to brown or even an indeterminate color.
But adding green to yellow dates olive color. If you add just a little yellow, the green color will become more saturated and dark.
By mixing yellow and green colors, we get bright light green color.
But in order to actually get a bright light green color, the proportions when mixing paints must be the same 1:1.
By adding a little more of one color and a little less of another color you can get different colors from brown to dark blue and from blue to light blue.
When mixing green and yellow flowers The result will be a light green color of varying shades depending on the proportions of these colors. Up to olive color. In general, to put it simply, it will just be a light green color.
It depends in what proportions you mix yellow and green. If the proportions are the same 1:1, then you will get a light green color. Depending on the increase in any color, the shade will change. For example, more yellow, the color will become light green and vice versa.
How to get blue color when mixing paints for painting pictures, in printing and computer graphics? Blue is one of the triad of primary colors, the other two being red and yellow. Under natural conditions, it is impossible to obtain a color by mixing the other two. All features are determined by many conditions.
It is impossible to obtain a truly basic color in the process of painting. It is false to believe that blue is obtained by mixing green and yellow; on the contrary, olive is obtained. How to get blue? Achieving the goal is simple: just mix blue and white in equal proportions.
IN fine arts They often use a ready-made palette, where the proportions and relationships of colors are painted. But with it you can only get shades of blue:
- Blue - produced by mixing aquamarine and white paint in a 2:1 ratio.
- Royal shade– obtained by mixing aquamarine and pink.
- Dark blue - produced by combining two parts standard blue and one part black.
- Gray-blue - produced by combining the base color and brown. It is brown that will create the darkening effect.
There are a lot of options for proportions and ratios, combinations of shades. In the standard set, an analogue of blue paint can be obtained by mixing aquamarine with pink.
Video: how to mix oil paints.
Synthesis in typography
This method is used in modern printers. It is believed that in printing, blue can be obtained by mixing green and one of the shades of purple - fuchsia. Naturally, a pure basic one will not work, but only an analogue close to the original.
In the field of typographic work, the lack of quality in color saturation is improved artificially, using the play of shades and contrast. Using a standard color wheel, you can also recreate shades. How to make a high-quality analogue can be answered by a highly qualified specialist using the trial and error method. In any case, there must be a basic tone, which, when mixed, will become the basis for creating your own interpretations.
Not only the palette for creating color is taken into account, but also the characteristics of the surface on which the tone will be applied. First you need to take a sample and test it.
Computer graphics and basic palette
It is possible to create blue color in so-called “artificial conditions” without any problems. Even though it is basic, a specific condition can be found. Software provides the ability to synthesize any color using a correctly written binary code.
Unlike typography and artists, programmers do not face the problem of obtaining the main color to obtain this base. The main thing is to choose the appropriate software environment.
Natural dyes
Natural dye is valued much more expensive than synthetic options. This paint can be used to color textiles and food items. You can get blue from:
- grapes;
- blueberries;
- blackberries;
- eggplant peel;
- cauliflower leaves.
There are more exotic options for obtaining a base. They are too expensive and complex in terms of preparation technology. The above are actively used in the creation of food colorings, watercolor paints and gouaches. But the resulting paint is completely safe for health and life. There are also disadvantages to using natural dyes: they wash quickly, the base is unsaturated, and leaves marks on the skin and surfaces.
Beginning painters and designers are often interested in how to mix paints to get desired color. There are basic shades, when combined, a new original version can emerge. In some situations, this task arises when one paint runs out and can be replaced by mixing several options. Two or more can be used for this purpose.
How to mix paints to get different shades?
I would like to note that such a task is difficult, since some paints, after being combined with each other, provoke reactions, which ultimately have a negative effect on the result, for example, the color may become dark or even lose its tone and become gray.
Understanding what paints can be mixed, it is worth saying that it is impossible to obtain yellow, red and blue colors by combining other paints, but they are actively used in different combinations.
Let's learn how to mix paints to get some colors:
- Pink. To make this color come out, you need to mix red and white in equal quantities. By varying the proportion of white paint, you can obtain shades of different saturation.
- Green. To get this color, mix blue, cyan and yellow in equal proportions. If you want to create an olive shade, then combine green, yellow and add a small amount of brown. The light shade is obtained by mixing yellow, green and white.
- Orange. This beautiful color is achieved by combining red and yellow. The more red you end up with, the brighter the final shade.
- Violet. In this case, you need to mix the following paint colors: and blue, and in equal proportions. If you change the proportions and add white, you can get different shades.
- Grey. Exists great amount options, so to get different shades, you should mix black and white in different proportions.
- Beige. This color is often used, for example, when painting portraits. To obtain it, you need to add white to the brown color, and then, to improve the brightness, use a little yellow.
It is worth noting that the closer the colors are to each other color wheel, the similar their tone is, which means the result will be cleaner and richer.
When choosing paint for the interior, even for watercolor paintings, it is easy to make a mistake with the shade. Paper testers may not match the tone in reality.
Don't worry, there is a way to achieve the desired shade! Read on to find out what paints to mix to get blue.
In contact with
Creating a classic shade
Unfortunately, no matter what components are mixed, without the primary tone itself it will not be possible to even come close to creating the required shade .
Red and yellow colors follow the same rule.
If the color in your palette is too dark, then white paint will help to lighten it a few tones.
If, on the contrary, you need to darken the shade, then you need to add more dark tones to the mixture - black, gray or brown.
Important! If you are mixing colors to create a small pattern in the interior, then you can mix them in a small bowl by hand. If you want to paint an entire wall, tint the ingredients in a bucket using a mixer.
How to maintain proportions
How to get blue color by mixing:
- Get delicate ultramarine by mixing blue and white parts in a 3:1 ratio.
- To create a shade with a slight blue, increase the portion of white color. The ratio of blue to white is 2:1.
- To obtain a more transparent, light tone, mix them in equal proportions.
WITH Hello! The heavenly color is perfect for painting a boy’s nursery.
A turquoise tone will help you get a more saturated heavenly tone.
A complex recipe of three ingredients will help create color sea wave. How to make blue using turquoise and white? Take 2 parts blue paint, 1 part white and turquoise. Enjoy the blue of the sea.
This is interesting! Red, blue, yellow are called primary, because by mixing other tones it is not possible to achieve the desired shade. Why do you need to know what colors need to be mixed to make blue? To achieve a play of shades and original texture, create artistic masterpieces.
Dark shade
In the case when you want to make the color darker, the mixing recipe is a little more complicated. It all depends on what the final result is and how rich the tone you are trying to achieve. How to successfully mix different tones to get a dark blue color:
- You will need two paints: black and aquamarine. If the tone is made to decorate parts, then stir the mixture with a brush or stick in a small container. To paint walls, you need to tint the shade with a construction mixer, a special attachment for an angle grinder.
- There are no exact proportions. Add black color to the base paint drop by drop or a few milliliters.
- It is better to test the resulting mixture on a sheet of white paper and let it dry. If you are satisfied with the shade, then stop tinting. If not, add even more black.
Advice! Did it get dark? Lighten the mass by several tones using white. Stir in gradually so you don't have to add black again.
Violet
Ultramarine is similar to artificial, which does not occur in nature. Purple will help create paint the color of a dark sky. Magic coloring will help create an interesting tone that can be used to paint the ceiling in the nursery, and bright luminous star stickers will create an imitation of the night sky. How to get blue from purple:
- Mix blue paint with purple in proportions 3:1.
- For the ceiling, knead the dye with a construction hook for about 10 minutes.
- Test the finished mixture on a small section of the wall. Do not forget that you need to apply the interior color in 2-3 layers.
A woman's favorite shade is royal ultramarine.
To get such a noble tone on the verge of night blue and sea wave, you need an acidic violet color or pink. The recipe is similar to the previous tinting:
- You will need 2 tones: acid violet (pink) and ultramarine.
- The proportions of blue and pink are 3:1. Sometimes you need a little more pink.
- Evaluate the result by applying the dye to a small area.
Advice! To get purple, mix red and blue in equal proportions.
From yellow
To create emerald based on ultramarine of blue color, you need yellow. The resulting shade is similar to glitter precious stones. It is appropriate to use it for decoration small elements to make a fantastic picture. How to get blue from yellow:
- Mix yellow and ultramarine colors in equal parts.
- For a pastel look, add white. The proportion recipe depends on the desired degree of pallor.
Advice! To create a fantastic shimmery color, do not stir the paint too thoroughly. A lazy tinting method will create an interesting mother-of-pearl effect.
From green
Prussian blue is a favorite of designers not only for interior design, but also for clothing.
The deep color is associated with the depths of the sea and a distant galaxy. How to easily turn green into blue:
- We combine two colors: aquamarine and green in equal parts.
- Mix using a technique to ensure uniform texture.
Surprisingly, when adding a third white ingredient, the color does not fade.
How to make paint the right shade
What if there is no main color, but you need to make blue paint? An interesting tone, similar to sapphire shine, is obtained by mixing red and green. This tinting will not give pure ultramarine, but by adding black and white paint you can achieve interesting and unusual shades.
Useful video: how to mix colors
Combine combinations of warm shades with delicate pastels, blue tones with cold ones. Change the proportions to your liking; proper tinting is the key to successful repairs. Experiment and create your own color scheme!
Brown is a versatile color that has many possible uses, but it is not always found in art supply sets. Fortunately, various shades brown can be obtained by mixing three primary colors: red, blue and yellow. Just mix these three primary colors and you have it. Brown color. You can also start with a secondary color, such as orange or green, and add a primary color to it until you get brown. To achieve the shade of brown you want, add more of one of the primary colors, use a little black, or mix two or more different shades.
Steps
Mix primary colors in equal proportions
- Leave some space between flowers. In that free space in the middle you will mix different colors.
- To get brown from primary colors, you just need to mix them in equal quantities.
-
Mix red and yellow together to make orange. Start with enough red paint and add yellow paint little by little until you reach a 1:1 ratio. At the same time, mix the paints until you get a dark orange color.
- To make the brown color dark enough, you can use a little more red paint.
-
Mix orange with blue to get brown. Use a little less blue than orange - the proportion of blue paint should not exceed 35-40%. Mix the paints thoroughly until you get a chocolate brown color.
Mix red and blue to get purple. Use these two colors in approximately equal proportions. The perfect combination of red and blue will produce violet, and if you deviate from the exact proportions, you will end up with purple or a similar red tint.
- Getting the right purple color is quite difficult. If the final mixture has a reddish or bluish tint, add a little of the opposite color to achieve balance.
- If you add too much blue paint, the purple color will be more difficult to correct. It is easier to achieve the right shade with an excess of red.
-
Add yellow paint little by little to the purple until you get a brown color. As you mix the paints, you will notice a dirty brown tint beginning to emerge. Continue adding yellow paint in small increments until you get the color you want.
Mix blue and yellow to make green. Squeeze out a large drop of blue and add yellow paint to it little by little. As with orange, you should start with the most saturated green and move towards the middle of the spectrum.
- For best results, the green color should be closer to dark blue than light aquamarine.
-
Add the right amount of red paint to green to get brown. Mix in just a little red at first and continue adding and stirring as needed to get more dark color. A mixture of green and red can range from an earthy olive brown to a warm burnt orange hue.
- To get the most “real” brown color possible, the mixture should contain 33-40% red dye. If the proportion is equal, red will slightly predominate.
Advice: The brown color obtained from a mixture of red and green is perfect for landscapes and images of nature.
How to get different shades
Add a little more red or yellow paint to give the brown a warmer tone. If you want to lighten or enhance the brown, simply add a small amount of one of the warm primary colors. Add paint in small portions and stir continuously until you get the desired shade.
Squeeze a small drop of each color onto the mixing surface. Place red, blue and yellow paints next to each other on a palette or piece of paper. The exact quantity depends on how much brown paint you need. It is important that there is an equal amount of each paint.
Advice: In principle, this combination can be used for oil sticks, watercolors or colored pencils, but the final color may not be uniform, since they are more difficult to mix.
Mix the colors completely. Run the tip of the palette knife along the inside edges of all three paints to bring them toward the center. Then use the flat bottom surface of the tool to mix the paints using increasingly wider circular movements. At the same time, you will notice that the mixture gradually acquires a rich brown color.
Add a little white to give the brown some depth. Once you have mixed the paints and got a brown color, add some white paint and continue mixing until it is completely gone. Be careful not to use too much white paint - generally no more than ⅓ of the total paint is needed.